Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
c<br />
d<br />
b<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - VALVES<br />
Finishing of vertical valve<br />
• Cut out the covering of the valve’s body (1), taking the measurements of the indicated diameters (a-b-c), and leave an abundance for the overlap of the joints .<br />
On the coresponding side on the upper part, add the indentation. Make an opening cut in the shape (d) to allow for installation.<br />
• Place the shape around the valve’s body, folding the indentation on the upper part (2)<br />
• Fix the finishing parts with K 420 adhesive (3-4).<br />
a<br />
1<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
Abundance<br />
a<br />
A2<br />
2 3 4<br />
c<br />
b<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - VALVES 08<br />
6