Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - VALVES<br />
Finishing of vertical valve<br />
• With the appropriate template cut out the finishing of the stuffing box body, leaving an excess for the overlapping of the joints. (1-2).<br />
On the curved part of the shape make an indentation of at least 5 cm.<br />
• Apply the shape on the stuffing box opening the indentation onto the body of the valve.<br />
Fix the finishing with K 420 adhesive (3-4-5).<br />
Abundance<br />
1 2<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
4<br />
3<br />
5<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - VALVES 07<br />
6