Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• Cut out a ring, the diameter of<br />
the cylindrical body of the valve,<br />
with the external indentation and<br />
the central hole corresponding to<br />
the diameter of the tubes already<br />
covered (1).<br />
• Make an opening cut (c)<br />
on the indented ring and place it<br />
on the lower edge of the valve.<br />
Fold the indentations on the<br />
cylindrical body of the valve and<br />
fix it with K 420 adhesive (2-3-4).<br />
1<br />
c<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - VALVES<br />
Finishing of vertical valve<br />
b<br />
a a<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
b<br />
3<br />
2<br />
4<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - VALVES<br />
6<br />
05
Change language