Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• Cut out the two sections of <strong>IC</strong> / IN <strong>CLAD</strong><br />
sheet for the finishing of the two parts<br />
of the piping (1-2) leaving an abundance of<br />
5 cm for the overlap.<br />
• Install the two sections of sheet on the<br />
tubes, folding the indentation on the<br />
upper and lower edges of the valve’s body.<br />
Fix the overlap (3-4) and the indentation (5)<br />
with K 420 adhesive.<br />
1<br />
2<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - VALVES<br />
Finishing of vertical valve<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
Abbondanza Abbondanza<br />
5<br />
3<br />
4<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - VALVES 04<br />
6