Issue 17 - Free-Energy Devices

first generation work for more than 10 years and
are build in many countries: in Russia, in
Ukraine, in Byelorussia, China, France,
Germany, USA and in other countries, some
different statistical data is being accumulated.
One of the global factors of the vortex thermal
generators, by our opinion, is not even the peak
efficiency but economy of fuel, that each year is
harder to get, and its collection places go further
and deeper.
Many questions concern the physics of the
processes that happen in vortex heat generators
(VHG). By our opinion is based on the 15 year
long researches: it is known that in a VHG three
processes take place at the same time. In a VHG
a vortex process appears which in 10-15 seconds
fills the entire vortex pipe. The birth of the
vortex process starts in the center of the
cylindrical body of a VHG, at the point, which
is visible to the naked eye. This was noticed first
in the clear glass VHG in NIC RKK “Energia”
named after S.P. Korolev.
All three known physical phenomenons as such:
1. The friction during the fast spinning of
water (including the levels’ of the water
friction).
2. Cavitation balls in water stream, which do
not touch the walls of VHG.
3. Water molecular synthesis. During fast
spinning the water molecules connect in
associates. And during it the biggest portion of
the heat energy extracts.
Fig.4
Potapov’s thermalgenerator of the seventh generation
The scientists established that if you connect
10% of all water molecules in associates, then
the water boils immediately. From here the main
factor of extra energy was determined. On a base
of hundreds of conducted experiments was
established, that the spinning movement, or the
vortex movement, of liquid raises the water
molecules synthesis process in three times
compare to in a straight line movement.
Happened, that the water molecules synthesis
phenomenon prevails on the rest of the
phenomenons on heat extraction. It was
confirmed later by works of professors F.M.
Kanarev (Russia) and Misuno (Japan). In the
laboratory conditions they got the efficiency
coefficient number, which equals
40.53;42.15;41/07. In other words, data on ratio
between extracted energy and input energy is
more than 4000%. By our opinion, these
numbers are far from the limit. Today good
perspectives on the future VHG use are open.
6 New Energy Technologies, Issue #3(18) 2004
Fig.5
Heat generator