Water Specialist 1.5", 2" and 2L Control Valve ... - ClackValves.Net

WS1.5, 2 & 2L Drawings & Service Man u al Page 13
WS1.5 and 2L Drain Line Option
The drain port on the WS1.5 & 2L is 1.25” Female NPT threads. V3079 WS DLFC ASY 125 FNPT/15
FNPT and V3079BSPT WS DLFC ASY 125 FNPT/15 FBSPT are options are available for purchase to
control the rate of fl ow to drain. Requires one V3190-XXX drain line fl ow control washer and up to six of the
V3162-XXX drain line fl ow control washers. Flow rate ranges from 9 gpm up to 85 gpm. Requires separate
purchase of a length (dependant on back plate dimensions) of male NPT to male NPT threaded pipe or fi tting
and put Tefl on tape on both ends. Remove the existing fi tting from the valve body.
WS2 Drain Line
The drain port on the WS2 is 1.5” Female NPT threads. The following options are available for purchase
to control the rate of fl ow to drain:
• V3158-04 WS2 DRN ELBOW 3/4 90 W/O SIL. Accepts one V3162-XXX drain line fl ow control
washer with fl ow rate range up to 10 gpm. Adapter and reducing bushing included in assembly.
• V3008-05 WS2 FTG DRAIN 1 STRT W/O SIL. Accepts one V3190-XXX drain line fl ow control
washer with fl ow rate range from 9 gpm up to 25 gpm. Adapter and reducing bushing included in
assembly.
• V3080 WS DLFC ASY 15 MNPT/15 FNPT or V3080BSPT WS DLFC ASY 15 MNPT/15 FBSPT.
Requires one V3190-XXX drain line fl ow control washer and up to six of the V3162-XXX drain line
fl ow control washers. Flow rate ranges from 9 gpm up to 85 gpm.