Section 2 ADA MASS CODE - Acryline
Section 2 ADA MASS CODE - Acryline Section 2 ADA MASS CODE - Acryline
COMMERCIAL SHOWERS ADA (COMMONWEALTH OF MASSACHUSETTS) JUNE 2010
- Page 2 and 3: 19" 36" 36" I.D. w w w . a c r y l
- Page 4 and 5: w w w . a c r y l i n e . c a 42" 3
- Page 6 and 7: 4" D 32 1/2" Curtain rod optional 1
- Page 8: 8 1/4" w w w . a c r y l i n e . c
COMMERCIAL SHOWERS<br />
<strong>ADA</strong><br />
(COMMONWEALTH OF <strong>MASS</strong>ACHUSETTS)<br />
JUNE 2010
19"<br />
36"<br />
36" I.D.<br />
w w w . a c r y l i<br />
41"<br />
n e<br />
O.D.<br />
. c a<br />
19"<br />
OPTIONS:<br />
A 3636 -<strong>ADA</strong>-3/4 MODIFIED<br />
38"<br />
Curtain Rod<br />
Optional<br />
Peened s.s.<br />
grab bar<br />
36" I.D.<br />
41" O.D.<br />
201/2"<br />
3/4"<br />
3/4"<br />
27"<br />
25"<br />
35"<br />
25"<br />
171/2"<br />
48"<br />
40"<br />
83"<br />
75"<br />
361/2"<br />
Model A3636 <strong>ADA</strong>-FUS-3/4”R: Valve right, seat left<br />
Model A3636 <strong>ADA</strong>-FUS-3/4”L: Valve left, seat right<br />
24"<br />
43 1/4"<br />
36"<br />
I.D.<br />
40"<br />
A 3636 -<strong>ADA</strong>-3/4 MODIFIED<br />
(<strong>MASS</strong> <strong>CODE</strong>)<br />
4" 5" 9" 3"<br />
38" O.D.<br />
161/2"<br />
48"<br />
40"<br />
• <strong>ADA</strong> COMPLIANT<br />
• ICC/ANSI 117.1/ANSI Z124.2<br />
25"<br />
• CSA 19" B45.5 94/B45-94<br />
• ASTM E-84/ULC-S-102 3/4"<br />
• Meets requirements for Universal Plumbing<br />
Code administered by IAPMO, HUD, BOCA,<br />
and NAHB.<br />
19"<br />
361/2<br />
30. Inside measures 27" 36” x 36” 361/2" x 80 1/2”. Outside measures 41”x 36 1/2”x 361/2"<br />
O.D. 27" 83”. Approximate weight 226 lbs.<br />
36"<br />
36"<br />
36"<br />
36"<br />
I.D.<br />
I.D.<br />
Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP226<br />
Forward flange adaptor (consult representative) Collapsable water retaining strip #OP100<br />
Drain relocation (see alt. drain position drawing) Semi-permanent threshold #OP305<br />
Hand held shower w/ 60” flex hose & 24” slide bar Removable threshold #OP308<br />
30” slide bar Halogen dome light #OP228<br />
In-line vacuum breaker Pre-drilled for dome light #OP320<br />
NOTE:<br />
Backing & bolts for fold-up seat<br />
may add up to 3/4”<br />
to overall dimensions.<br />
and shall be sealed 201/2" to insure water tight integrity. Unit shall 201/2" have 5/8” 201/2" receiving flange, self-caulking brass drain 201/2" with s.s.<br />
State agencies and local cities sometimes require specific code compliance regulations. <strong>Acryline</strong> ® . <strong>ADA</strong> compliant units are based on the guidelines of the American with Disabilities Act 1991.<br />
Any improper installation/field modifications could take the enclosure out of compliance. <strong>Acryline</strong> ® accepts no responsibility for final code compliance.<br />
Pressure balanced shower valve 1” S.S Curtain rod #OP220 (Factory installed)<br />
201/2"<br />
19"<br />
35"<br />
75"<br />
361/2<br />
O.D.<br />
36" I.D.<br />
41" O.D.<br />
Note: Dimensions may vary within normal manufacturing tolerences + /- 1/4”.<br />
Modifications: Received and/or Approved by:<br />
<strong>Acryline</strong> 991 Atlantic Ave. Manasquan, NJ U.S.A. 08736<br />
<strong>Acryline</strong> 2015 Becancour, Lyster, Qc. Canada G0S 1V0<br />
Tel: 800-794-4667 • Fax : 732-441-3991 • service@acryline.ca<br />
83"<br />
24"<br />
431/4"<br />
40"<br />
4" 5" 9" 3"<br />
ARCHITECTUAL SPECIFICATION:<br />
38"<br />
38" O.D. 38"<br />
38" O.D.<br />
Shower Enclosure shall be an <strong>ADA</strong> compliant <strong>Acryline</strong> ® , model number A 3636 <strong>ADA</strong>-FUS-3/4 R or L molded from a single<br />
sheet of cast acrylic resulting in no seams or joints. Unit shall have a 3/4” or less threshold lip with encapsulated steel<br />
reinforcement for level floor installation. Enclosure shall be certified ANSI Z124.2 with a backside flame spread of less than<br />
Enclosure equipped standard with “HD” white padded fold-up seat L/H #OP176 and 3 integral molded soap trays.<br />
171/2"<br />
161/2" 171/2"<br />
Enclosure equipped with factory installed 18 gauge s.s.half wrap grab bars ; 1 half wrapped: 15 3/4”x 31 1/4”x 1 1/4”<br />
#OP215M & 1 vertical : 18” X 1 1/4” #OP212M (Grab bar to be peened). Grab bars to be installed with steel backing<br />
strainer #OP304 and the following options: (“HD” White padded fold-up seat R/H #OP177 )<br />
19"<br />
161/2"<br />
JUNE 2010<br />
361/2<br />
O.D.
"<br />
20 1/4"<br />
36"<br />
OPTIONS:<br />
36" I.D.<br />
41" O.D.<br />
A 3636 -<strong>ADA</strong>-3/4 MODIFIED<br />
w w w . a c r y l i n e . c a<br />
38"<br />
Curtain Rod<br />
Optional<br />
Peened s.s.<br />
grab bar<br />
201/2"<br />
36" I.D.<br />
41" O.D.<br />
2"<br />
27"<br />
2"<br />
27"<br />
171/2"<br />
36 1/4"<br />
261/4"<br />
361/2"<br />
41 1/4"<br />
361/2"<br />
761/4"<br />
491/4"<br />
Model A3636 <strong>ADA</strong>-FUS-2”R: Valve on right, seat on left<br />
Model A3636 <strong>ADA</strong>-FUS-2”L: Valve on left, seat on right<br />
841/4"<br />
36"<br />
I.D.<br />
24"<br />
36"<br />
I.D.<br />
4" 5" 9" 3"<br />
201/2"<br />
• <strong>ADA</strong> COMPLIANT<br />
• ICC/ANSI 117.1/ANSI Z124.2<br />
201/4"<br />
261/4"<br />
• CSA B45.5 94/B45-94<br />
2"<br />
• ASTM E-84/ULC-S-102<br />
• Meets requirements for Universal Plumbing<br />
Code administered 36" by I.D. IAPMO, HUD, BOCA,<br />
and NAHB. 41" O.D.<br />
44 1/2"<br />
411/4"<br />
A 3636 -<strong>ADA</strong>-3/4 MODIFIED<br />
(<strong>MASS</strong> <strong>CODE</strong>)<br />
38" O.D.<br />
Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP226<br />
Hand held shower w/ 60” flex hose & 24” slide bar Collapsable water retaining strip #OP100<br />
Forward flange adaptor (consult representative) Semi-permanent threshold #OP305<br />
Drain relocation (see alt. drain position drawing) Removable threshold #OP308<br />
30” slide bar Halogen dome light #OP228<br />
In-line vacuum breaker Pre-drilled for dome light #OP320<br />
36"<br />
NOTE:<br />
Backing & bolts for fold-up seat<br />
may add up to 3/4”<br />
to overall dimensions.<br />
State agencies and local cities sometimes require specific code compliance regulations. <strong>Acryline</strong> ® . <strong>ADA</strong> compliant units are based on the guidelines of the American with Disabilities Act 1991.<br />
Any improper installation/field modifications could take the enclosure out of compliance. <strong>Acryline</strong> ® accepts no responsibility for final code compliance.<br />
Pressure balanced shower valve 1” S.S Curtain rod #OP220 (Factory installed)<br />
27"<br />
361/2<br />
O.D.<br />
19"<br />
161/2"<br />
41 1/4"<br />
361/4"<br />
761/4"<br />
361/2<br />
O.D.<br />
491/4"<br />
Note: Dimensions may vary within normal manufacturing tolerences + /- 1/4”.<br />
84 1/4"<br />
24"<br />
4" 5" 9" 3"<br />
ARCHITECTUAL SPECIFICATION:<br />
38"<br />
38" O.D.<br />
Shower Enclosure 38" shall be an <strong>ADA</strong> compliant <strong>Acryline</strong> 38" O.D.<br />
19"<br />
361/2"<br />
® , model number A 3636 <strong>ADA</strong>-FUS-2 R or L molded from a single<br />
sheet of cast acrylic resulting in no seams or joints. Unit shall have a 2” or less threshold lip with MDF reinforcement for<br />
recessed installation. Enclosure shall be certified ANSI Z124.2 with a backside flame spread of less than 30. Inside<br />
measures 36” x 36” x 80 1/2”. Outside measures 41”x 36 1/2”x 84 1/4”. Approximate weight 226 lbs.<br />
Enclosure equipped standard with “HD” white padded fold-up seat L/H #OP176 and 3 integral molded soap trays.<br />
171/2"<br />
Enclosure equipped with factory installed 18 gauge s.s. grab bar; 1 half wrapped: 15 3/4”x 31 1/4”x 1 1/4” #OP215M <br />
171/2"<br />
161/2"<br />
& 1 vertical : 18” X 1 1/4” #OP212M (Grab bar to be peened).Grab bars to be installed with steel backing and shall be<br />
sealed to insure water tight integrity. Unit shall have 5/8” receiving 201/2" flange, self-caulking brass drain with s.s. 201/2" strainer<br />
#OP304 and the 201/2" following options: (“HD” white padded 201/2" fold-up seat R/H #OP177 )<br />
Modifications: Received and/or Approved by:<br />
<strong>Acryline</strong> 991 Atlantic Ave. Manasquan, NJ U.S.A. 08736<br />
<strong>Acryline</strong> 2015 Becancour, Lyster, Qc. Canada G0S 1V0<br />
Tel: 800-794-4667 • Fax : 732-441-3991 • service@acryline.ca<br />
36"<br />
I.D.<br />
441/2"<br />
411/4"<br />
19"<br />
161/2"<br />
JUNE 2010<br />
361/2<br />
O.D.
w w w . a c r y l i n e . c a<br />
42"<br />
30"ID<br />
OPTIONS:<br />
3/4"<br />
25"<br />
60 1/4 "ID<br />
65 "OD<br />
OPTIONAL CURTAIN ROD<br />
30"<br />
35"<br />
70 3/4"<br />
48"<br />
82 3/4"<br />
75"<br />
60 1/4 "ID A 6030 MS-3/4<br />
Model A6030 <strong>ADA</strong>-FUS-3/4”R: Seat on right<br />
Model A6030 <strong>ADA</strong>-FUS-3/4”L: Seat on left<br />
20"<br />
18"<br />
• <strong>ADA</strong> COMPLIANT<br />
• ICC/ANSI 117.1/ANSI Z124.2<br />
• CSA B45.5 94/B45-94<br />
3/4"<br />
• ASTM E-84/ULC-S-102<br />
• Meets requirements for Universal Plumbing<br />
Code administered by IAPMO, 60 1/4 "ID HUD, BOCA,<br />
65 "OD<br />
and NAHB.<br />
State agencies and local cities sometimes require specific code compliance regulations. <strong>Acryline</strong> ® . <strong>ADA</strong> compliant units are based on the guidelines of the American with Disabilities Act 1991.<br />
Any improper installation/field modifications could take the enclosure out of compliance. <strong>Acryline</strong> ® 32 1/2"<br />
32 1/2"<br />
accepts no responsibility for final code compliance.<br />
Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP227<br />
Hand held shower w/ 60” flex hose & 24” slide bar Collapsable water retaining strip #OP101<br />
Forward flange adaptor (consult representative) Semi-permanent threshold #OP307<br />
Pressure balanced shower valve Removable threshold #OP310<br />
30” slide bar Halogen dome light #OP228<br />
In-line vacuum breaker Pre-drilled for dome light #OP320<br />
1” S.S Curtain rod #OP222 (Factory installed)<br />
Modifications: Received and/or Approved by:<br />
<strong>Acryline</strong> 991 Atlantic Ave. Manasquan, NJ U.S.A. 08736<br />
<strong>Acryline</strong> 2015 Becancour, Lyster, Qc. Canada G0S 1V0<br />
Tel: 800-794-4667 • Fax : 732-441-3991 • service@acryline.ca<br />
42"<br />
25"<br />
OPTIONAL CURTAIN ROD<br />
30"<br />
20"<br />
70 3/4"<br />
16 1/2"<br />
48"<br />
16 1/2"<br />
82 3/4"<br />
75"<br />
NOTE: Backing & bolts for 35" fold-up seat<br />
may add up to 3/4” to overall dimensions.<br />
ARCHITECTUAL SPECIFICATION:<br />
Shower Enclosure shall be an <strong>ADA</strong> compliant <strong>Acryline</strong><br />
63"OD<br />
63"OD<br />
13"<br />
13"<br />
30 1/2"<br />
30"ID<br />
16 1/2"<br />
® , model number A6030<strong>ADA</strong>-FUS-3/4 R or L molded from a single<br />
sheet of cast acrylic resulting in no seams or joints. Unit shall have a 3/4” or less threshold lip with anchoring tabs and<br />
encapsulated steel reinforcement for level floor installation. Enclosure shall be certified ANSI Z124.2 with a backside<br />
flame spread of less than 30. Inside measures 60 1/4”x 30”x 78”. Outside measures 65”x 30 1/2”x 82 3/4”. Approximate<br />
weight 243 lbs.<br />
Enclosure equipped standard with “HD” white padded fold-up seat R/H #OP175 and 3 integral molded soap trays.<br />
Enclosure equipped with a factory installed 18 gauge s.s. half wrap grab bar 15 3/4”x 31 1/4”x 1 1/4” #OP215M (Grab<br />
bar to be peened). Grab bar to be installed with steel backing and shall be sealed to insure water tight integrity. Unit shall<br />
have 5/8” receiving flange, self-caulking brass drain with s.s. strainer #OP304 and the following options: (“HD”<br />
white padded fold-up seat R/H #OP174 )<br />
30"ID<br />
65 "OD<br />
63"OD<br />
Anchoring Tabs<br />
Note: Dimensions may vary within normal manufacturing tolerences + /- 1/4”.<br />
32 1/2"<br />
(<strong>MASS</strong> <strong>CODE</strong>)<br />
13"<br />
30 1/2"<br />
JUNE 2010<br />
30 1/2"
w w w . a c r y l i n e . c a<br />
44"<br />
30"ID<br />
2"<br />
OPTIONS:<br />
261/4"<br />
60 1/4 "ID<br />
65 "OD<br />
OPTIONAL CURTAIN ROD<br />
30"<br />
A 6030 60 1/4 "ID MS-3/4<br />
65 "OD<br />
Model A6030 <strong>ADA</strong>-FUS-2”R: Seat on right<br />
Model A6030 <strong>ADA</strong>-FUS-2”L: Seat on left<br />
20"<br />
361/4"<br />
191/4"<br />
491/4"<br />
72"<br />
• <strong>ADA</strong> COMPLIANT 261/4"<br />
361/4"<br />
• ICC/ANSI 117.1/ANSI Z124.2<br />
• CSA B45.5 94/B45-94<br />
• ASTM E-84/ULC-S-102<br />
2"<br />
• Meets requirements for Universal Plumbing<br />
Code administered by IAPMO, HUD, BOCA,<br />
and NAHB.<br />
60 1/4 "ID<br />
65 "OD<br />
measures 60 1/4”x 30”x 78”. Outside measures 13" 65”x 30 1/2”x 84”. Approximate weight 243 lbs.<br />
761/4"<br />
84"<br />
State agencies and local cities sometimes require specific code compliance regulations. <strong>Acryline</strong> ® . <strong>ADA</strong> compliant units are based on the guidelines of the American with Disabilities Act 1991.<br />
Any improper installation/field modifications could take the enclosure out of compliance. <strong>Acryline</strong> ® 32 1/2"<br />
32 1/2"<br />
accepts no responsibility for final code compliance.<br />
Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP227<br />
Hand held shower w/ 60” flex hose & 24” slide bar Collapsable water retaining strip #OP101<br />
Forward flange adaptor (consult representative) Semi-permanent threshold #OP307<br />
Pressure balanced shower valve Removable threshold #OP310<br />
30” slide bar Halogen dome light #OP228<br />
In-line vacuum breaker Pre-drilled for dome light #OP320<br />
1” S.S Curtain rod #OP222 (Factory installed)<br />
44"<br />
OPTIONAL CURTAIN ROD<br />
ARCHITECTUAL SPECIFICATION:<br />
Shower Enclosure shall be an <strong>ADA</strong> compliant <strong>Acryline</strong><br />
63"OD<br />
63"OD<br />
® , model number A6030 <strong>ADA</strong>-FUS-2 R or L molded from a single<br />
sheet of cast acrylic resulting in no seams or joints. Unit shall have a 2” or less threshold lip with MDF reinforcement<br />
for recessed installation. Enclosure shall be certified ANSI Z124.2 with a backside flame spread of less than 30. Inside<br />
Enclosure equipped standard with “HD” white padded fold-up seat R/H #OP175 and 3 integral molded soap trays.<br />
30 1/2"<br />
30"ID<br />
Enclosure equipped with a factory installed 18 gauge s.s.half wrap grab bar: 35”x 25 1/4”x 1 1/4” #OP215M (Grab<br />
bar to be peened). Grab bars to be installed with steel backing and shall be sealed to insure water tight integrity. Unit<br />
shall have 5/8” receiving flange, self-caulking 16 1/2" brass drain with s.s. strainer #OP304 and the following options: 16 1/2" (“HD”<br />
white padded fold-up seat L/H #OP174 )<br />
Modifications: Received and/or Approved by:<br />
30"ID<br />
63"OD<br />
Note: Dimensions may vary within normal manufacturing tolerences + /- 1/4”.<br />
<strong>Acryline</strong> 991 Atlantic Ave. Manasquan, NJ U.S.A. 08736<br />
<strong>Acryline</strong> 2015 Becancour, Lyster, Qc. Canada G0S 1V0<br />
Tel: 800-794-4667 • Fax : 732-441-3991 • service@acryline.ca<br />
2"<br />
30"<br />
(<strong>MASS</strong> <strong>CODE</strong>)<br />
20"<br />
32 1/2"<br />
13"<br />
491/4"<br />
72"<br />
16 1/2"<br />
13"<br />
761/4"<br />
84"<br />
30 1/2"<br />
NOTE: Backing & bolts for fold-up seat<br />
may add up to 3/4” to overall dimensions.<br />
30 1/2"<br />
JUNE 2010
4"<br />
D<br />
32 1/2"<br />
Curtain rod optional<br />
19"<br />
3/4"<br />
A 6036M<br />
25"<br />
660mm<br />
36 1/2"<br />
102mm<br />
457mm<br />
60 1/4"ID<br />
65"0D<br />
1651mm<br />
19mm<br />
OPTIONS:<br />
Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP227<br />
Pressure balanced shower valve Collapsable Water retainer strip #OP101<br />
Hand held shower w/ 60” flex hose Removable threshold #OP310<br />
30” slide bar Semi-permanent threshold #OP307<br />
In-line vacuum breaker Halogen dome light #OP228<br />
1” S.S Curtain rod #OP222 (Factory installed) Pre-drilled for dome light #OP320<br />
Forward flange adaptor (consult factory)<br />
30"<br />
20"<br />
18"<br />
36"<br />
42"<br />
48"<br />
1905mm<br />
75"<br />
70 3/4"<br />
82 3/4"<br />
• <strong>ADA</strong> COMPLIANT<br />
• ICC/ANSI 117.1/ANSI Z124.2<br />
• CSA B45.5 94/B45-94<br />
• ASTM E-84/ULC-S-102<br />
• Meets requirements for Universal Plumbing<br />
Code administered by IAPMO, HUD, BOCA,<br />
and NAHB.<br />
State agencies and local cities sometimes require specific code compliance regulations. <strong>Acryline</strong> ® . <strong>ADA</strong> compliant units are based on the guidelines of the American with Disabilities Act 1991.<br />
Any improper installation/field modifications could take the enclosure out of compliance. <strong>Acryline</strong> ® accepts no responsibility for final code compliance.<br />
32 1/2"<br />
w w w . a c r y l i n e . c a<br />
Peened s.s.<br />
grab bar<br />
19"<br />
16 1/2"<br />
36 1/2"<br />
Model A6036 <strong>ADA</strong>-FUS-3/4”R: Seat on right<br />
Model A6036 <strong>ADA</strong>-FUS-3/4”L: Seat on left<br />
ARCHITECTUAL SPECIFICATION:<br />
Shower Enclosure shall be an <strong>ADA</strong> compliant <strong>Acryline</strong> ® , model number A6036<strong>ADA</strong>-FUS-3/4”-R or L molded from a single<br />
sheet of cast acrylic resulting in no seams or joints. Unit shall have a 3/4” or less threshold lip with anchoring tabs and<br />
encapsulated steel reinforcement for level floor installation. Enclosure shall be certified ANSI Z124.2 with a backside<br />
flame spread of less than 30.Inside measures 60 1/4”x 36”X 78”. Outside measures 65”x 36 1/2”x 82 3/4”. Approximate<br />
weight 255 lbs.<br />
Enclosure equipped standard with “HD” white padded fold-up seat R/H #OP177 and 3 integral molded soap trays.<br />
Enclosure equipped with factory installed 18 gauge s.s.half wrap grab bar: 35”x 31 1/4”x 1 1/4” #OP217M (Grab bar<br />
16 1/2"<br />
to be peened). Grab bars to be installed with steel backing and shall be sealed to insure water tight integrity. Unit shall<br />
have 5/8” receiving flange, self-caulking brass drain with s.s. strainer #OP304 and the following options: (“HD” White<br />
padded fold-up seat L/H #OP176 )<br />
Modifications: Received and/or Approved by:<br />
36"ID<br />
63"OD<br />
Anchoring Tabs<br />
Note: Dimensions may vary within normal manufacturing tolerences + /- 1/4”.<br />
<strong>Acryline</strong> 991 Atlantic Ave. Manasquan, NJ U.S.A. 08736<br />
<strong>Acryline</strong> 2015 Becancour, Lyster, Qc. Canada G0S 1V0<br />
Tel: 800-794-4667 • Fax : 732-441-3991 • service@acryline.ca<br />
(<strong>MASS</strong> <strong>CODE</strong>)<br />
32 1/2"<br />
19"<br />
16 1/2"<br />
36 1/2"<br />
NOTE:Backing & bolts for fold-up seat<br />
may add up to 3/4”to overall dimensions.<br />
JUNE 2010
w w w . a c r y l i n e . c a<br />
Curtain rod optional<br />
Peened s.s.<br />
grab bar<br />
2"<br />
27 1/4"<br />
660mm<br />
102mm<br />
457mm<br />
60 1/4"ID<br />
65"0D<br />
1651mm<br />
19mm<br />
361/4"<br />
OPTIONS:<br />
Fold-up seat conversion package #OP169 (Less Seat) Anti-Bacterial shower curtain/hooks #OP227<br />
Pressure balanced shower valve Collapsable Water retainer strip #OP101<br />
Hand held shower w/ 60” flex hose Removable threshold #OP310<br />
30” slide bar Semi-permanent threshold #OP307<br />
In-line vacuum breaker 63"OD<br />
Halogen dome light #OP228<br />
1” S.S Curtain rod #OP222 (Factory installed) Pre-drilled for dome light #OP320<br />
Forward flange adaptor (consult factory)<br />
30"<br />
20"<br />
Integral padded<br />
Fold-up seat<br />
Left or Right<br />
19 1/4"<br />
44"<br />
72"<br />
49 1/4"<br />
76 1/4"<br />
84"<br />
Curtain rod optional<br />
A 6036M<br />
25"<br />
36"<br />
• <strong>ADA</strong> COMPLIANT<br />
660mm<br />
• ICC/ANSI 117.1/ANSI Z124.2<br />
• CSA B45.5 94/B45-94<br />
457mm<br />
18"<br />
• ASTM E-84/ULC-S-102 19mm<br />
• Meets requirements 3/4" for Universal Plumbing<br />
Code administered by IAPMO, HUD, BOCA,<br />
and NAHB. 60 1/4"ID<br />
65"0D<br />
1651mm<br />
Note: Dimensions may vary within normal manufacturing tolerences + /- 1/4”.<br />
Enclosure equipped standard 36"ID with “HD” white padded fold-up seat R/H 36 #OP177 1/2" and 3 integral molded soap trays.<br />
16 1/2"<br />
bar to be peened). Grab bars to be installed with steel backing and 16 shall 1/2" be sealed to insure water tight integrity. Unit shall<br />
State agencies and local cities sometimes require specific code compliance regulations. <strong>Acryline</strong> ® . <strong>ADA</strong> compliant units are based on the guidelines of the American with Disabilities Act 1991.<br />
Any improper installation/field modifications could take the enclosure out of compliance. <strong>Acryline</strong> ® 32 1/2"<br />
32 1/2"<br />
accepts no responsibility for final code compliance.<br />
36"ID<br />
2"<br />
60 1/4"ID<br />
Model A6036 <strong>ADA</strong>-FUS-2”R: Seat on right<br />
65"0D<br />
1651mm<br />
Model A6036 <strong>ADA</strong>-FUS-2”L: Seat on left<br />
ARCHITECTUAL SPECIFICATION:<br />
Shower Enclosure shall be an <strong>ADA</strong> compliant 63"OD <strong>Acryline</strong><br />
19"<br />
® , model number A6036<strong>ADA</strong>-FUS-2”-R or L molded from a single<br />
sheet of cast acrylic resulting in no seams or joints. Unit shall have a 2” or less threshold lip with MDF reinforcement 19" for<br />
recessed installation. Enclosure shall be certified ANSI Z124.2 with a backside flame spread of less than 30.Inside<br />
measures 60 1/4”x 36”X 78”. Outside measures 65”x 36 1/2”x 84”. Approximate weight 255 lbs.<br />
Enclosure equipped with a factory installed 18 gauge s.s.half wrap grab bar: 35”x 31 1/4”x 1 1/4” #OP217M (Grab<br />
have 5/8” receiving flange, self-caulking brass drain with s.s. strainer #OP304 and the following options: (“HD” White<br />
padded fold-up seat L/H #OP176 )<br />
Modifications: Received and/or Approved by:<br />
19mm<br />
32 1/2"<br />
36"ID<br />
36"ID<br />
19"<br />
16 1/2"<br />
36 1/2"<br />
102mm<br />
63"OD<br />
<strong>Acryline</strong> 991 Atlantic Ave. Manasquan, NJ U.S.A. 08736<br />
<strong>Acryline</strong> 2015 Becancour, Lyster, Qc. Canada G0S 1V0<br />
Tel: 800-794-4667 • Fax : 732-441-3991 • service@acryline.ca<br />
30"<br />
20"<br />
63"OD<br />
32 1/2"<br />
42"<br />
48"<br />
1905mm<br />
75"<br />
70 3/4"<br />
19"<br />
3/4"<br />
(<strong>MASS</strong> <strong>CODE</strong>)<br />
82 3/4"<br />
16 1/2"<br />
36 1/2"<br />
NOTE:Backing & bolts for fold-up seat<br />
may add up to 3/4”to overall dimensions.<br />
JUNE 2010<br />
36 1/2"<br />
60 1/4"ID<br />
65"0D<br />
1651mm
8 1/4"<br />
w w w . a c r y l i n e . c a<br />
1 1/2"<br />
18 5/8"<br />
13"<br />
16 1/2"<br />
35"<br />
3"<br />
34 1/2"<br />
30 1/2"<br />
OPTIONS:<br />
A6031 TS<br />
48 "<br />
60"<br />
55"<br />
White phenolic removable seat (special order) Anti-Bacterial curtain w/hooks #OP227<br />
Pressure balanced T/S valve w/diverter spout Halogen dome light #OP228<br />
Hand held shower w/ 60” flex hose & 24” slide bar Pre-drilled for dome light #OP320<br />
30” slide bar 1” S.S Curtain rod #OP222 (Factory installed)<br />
In-line vacuum breaker<br />
18"<br />
9"<br />
4"<br />
34 1/2"<br />
18 5/8"<br />
73"<br />
83 1/2"<br />
21 "<br />
3"<br />
• <strong>ADA</strong> COMPLIANT<br />
18 5/8"<br />
• ICC/ANSI 117.1/ANSI Z124.1 1 1/2"<br />
• CSA B45.5 94/B45-94<br />
• ASTM E-84/ULC-S-102<br />
60"<br />
• Meets requirements for Universal Plumbing<br />
Code administered by IAPMO, HUD, BOCA,<br />
55"<br />
and NAHB.<br />
State agencies and local cities sometimes require specific code compliance regulations. <strong>Acryline</strong> ® . <strong>ADA</strong> compliant units are based on the guidelines of the American with Disabilities Act 1991.<br />
Any improper installation/field modifications could take the enclosure out of compliance. <strong>Acryline</strong> ® 3"<br />
8 1/4"<br />
1 1/2"<br />
accepts no responsibility for final code compliance.<br />
3"<br />
1 1/2"<br />
40 1/2"<br />
35"<br />
Model A6031 TS <strong>ADA</strong>-R<br />
Model A6031 TS <strong>ADA</strong>-L<br />
Note: Dimensions may vary within normal manufacturing tolerences + /- 1/4”.<br />
13"<br />
60"<br />
55"<br />
60"<br />
9"<br />
4"<br />
34 1/2"<br />
18 5/8"<br />
13"<br />
16 1/2"<br />
8 1/4"<br />
34 1/2"<br />
ARCHITECTUAL SPECIFICATION:<br />
13"<br />
Tub Enclosure shall be an <strong>ADA</strong> compliant <strong>Acryline</strong> 30 1/2"<br />
16 1/2"<br />
® 30 1/2"<br />
24"<br />
, model number A6031<strong>ADA</strong>-TS R or L with removable wood grain<br />
16 1/2"<br />
phenolic seat #OP201 . Unit shall be molded from a single sheet of cast acrylic resulting in no seams or joints and have<br />
a full MDF reinforced base for level floor installation. Enclosure 4" shall be certified ANSI Z124.1 with a backside flame spread<br />
of less than 30. Inside measures 55” x 29” x 77”. Outside measures 60” x 30 1/2” x 83 1/2”. Approximate weight 247lbs.<br />
Enclosure equipped standard with 4 integral molded shelves at 34 1/2” & 52” above floor. Enclosure will be equipped<br />
with 3 factory installed 60" 18 gauge S.S. grab bars 2X (48” x 1 1/4” ) #OP214MS & 1X (18” x 1 1/4”) #OP212MS <br />
8 1/4"<br />
grab bars to be peened & installed with steel backing and shall be sealed to insure water tight integrity. Unit shall have<br />
5/8” receiving flange, and the following options.<br />
Modifications: Received and/or Approved by:<br />
40 1/2"<br />
35 "<br />
<strong>Acryline</strong> 991 Atlantic Ave. Manasquan, NJ U.S.A. 08736<br />
<strong>Acryline</strong> 2015 Becancour, Lyster, Qc. Canada G0S 1V0<br />
Tel: 800-794-4667 • Fax : 732-441-3991 • service@acryline.ca<br />
30 "<br />
60"<br />
18"<br />
(<strong>MASS</strong> <strong>CODE</strong>)<br />
52"<br />
73"<br />
83 1/2"<br />
30 1/2"<br />
NOTE: Backing & bolts for grab bars<br />
may add up to 3/4” to overall dimensions.<br />
JUNE 2010<br />
4