Developments in pulp and paper manufacture from sugarcane ...
Developments in pulp and paper manufacture from sugarcane ... Developments in pulp and paper manufacture from sugarcane ...
Bagasse Paper Mill Units Purchased pulp & stock preparation Paper Machine (PM) approach flow system & wet end Paper machine dry end 42
Paper Machine Dry End The paper sheet from the wet end former is fed through a multi-nip press section to press out water – typically achieving about 45 – 48% solids on a high bagasse content sheet. Over pressing must be avoided to keep from crushing the paper. From the press section, the paper sheet enters several sections of cylinder dryers. For fine papers, a size press is included in the dry end to apply sizing to the paper (sizing prevents feathering when ink is applied to the paper) and it is followed by more dryer sections to finish the drying. Once dried, the paper is run though a calendar stack and then onto the reel which builds up a large roll of paper the width of the paper machine. The reels of paper are taken off the paper machine and then run through a slitter winder to cut the paper into the proper roll widths.. 43
- Page 1 and 2: Developments in pulp and paper manu
- Page 3 and 4: Bagasse Pulp Mill Units Moist depi
- Page 5 and 6: Moist Depithing 5
- Page 7 and 8: Type Pro Zell Depither Driving powe
- Page 9 and 10: Bagasse Pulp Mill Units Moist depi
- Page 11 and 12: Wet Bulk Storage Bagasse wet bulk
- Page 13 and 14: Wet Bulk Storage Artist rendition -
- Page 15 and 16: Wet Bulk Storage Boom Stacker - Tam
- Page 17 and 18: Wet Depithing/Cleaning Wet depither
- Page 19 and 20: Bagasse Pulp Mill Units Moist depi
- Page 21 and 22: Cooking & Brownstock Washing Contin
- Page 23 and 24: Cooking & Brownstock Washing Browns
- Page 25 and 26: Oxygen Delignification Oxygen delig
- Page 27 and 28: Bagasse Pulp Mill Units Moist depi
- Page 29 and 30: Screening & Cleaning Screens GL&V H
- Page 31 and 32: Bagasse Pulp Mill Units Moist depi
- Page 33 and 34: Bleaching This flowsheet shows an E
- Page 35 and 36: Bagasse Paper Mill Units Purchased
- Page 37 and 38: Purchased Pulp & Stock Preparation
- Page 39 and 40: PM Approach Flow System & Wet End T
- Page 41: PM Approach Flow System & Wet End V
- Page 45 and 46: Paper Machine Dry End Press Section
- Page 47 and 48: Paper Machine Dry End Size Press Me
- Page 49: Paper Machine Dry End Reel Metso Va
Bagasse Paper Mill Units<br />
Purchased <strong>pulp</strong> & stock preparation<br />
Paper Mach<strong>in</strong>e (PM) approach flow<br />
system & wet end<br />
Paper mach<strong>in</strong>e dry end<br />
42