ECTS - PWSZ im. Witelona w Legnicy

The Witelon University of Applied Sciences in Legnica - Field: Management and production engineering
ECTS credits
2
1. Course title
Geometry and the engineering graphics I
2. Course contents
1. Preliminary messages: kinds of pictures, sheets, kinds and thicknesses of the line and drawing materials.
2. Basic notions of the descriptive geometry. Throws: centre (prospect), parallel oblique (axonometry), Monge
throws.
3. Normal layout of rectangular groups (European method). Examples of projecting elements about the different
degree of the complexity.
4. Sections and detail section of elements of machines.
5. Bases of dimensioning of objects: elements of drawing dimensions, principles of dimensioning, ways of
dimensioning of characteristic elements.
6. Of tolerating dimensions and fitting. Tolerance of the shape and the location. Surface roughness.
7. Structural pictures of typical elements: screw joints, rollers, wheels and transmission gears, sliding and rolling
bearings.
8. Assembly drawing - of deciphering the principle and making out
9. Principles of making out schemes of submitted technical arrangements in different areas of engineering:
plumbing, electronic, electric and thermal installations.
3.
10. Interpenetrating of rotational and nonrotational lumps and developing them.
Prerequisites
None
4. Learning outcomes
Purchasing the ability of presenting spatial geometrical works (parts of machines and the structure) on the plain and of
making out schemes and reading technical drawings from different areas of the technique.
5. Recommended reading
1. Dobrzański T.: Rysunek techniczny maszynowy. Warszawa: WNT 2000
2. Lewandowski T.: Rysunek techniczny dla mechaników. WSziP, Warszawa 2003.
3. Rydzanicz I.: Zapis konstrukcji. Podstawy. Oficyna Wydawnicza PWr. 2000.
4. Rydzanicz I.: Rysunek techniczny jako zapis konstrukcji. Zadania. WNT, Warszawa 2004.
5. Paprocki K.: Zasady zapisu konstrukcji. Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa 2000.
6. Burcan J.: Podstawy rysunku technicznego. WNT, Warszawa 2006.
7. Suseł M.: Grafika inżynierska. Zbiór zadań. Oficyna Wydawnicza Politechniki Wrocławskiej 2005.
6. Type of course
Obligatory
7. Teaching team
Department of Production Engineering and Logistics
8. Course structure:
Form Number of hours Semester year
Lecture
Classes
Laboratory
Project
Seminar
Other
30/12 I 1
Total student’s workload 60
9. Assessment methods
Exercises: realization of topics on classes and of home works, written final test e.g. set by the picture of object
10. Language of instruction
Polish
ECTS Course Catalogue 2010/2011
1159