05.04.2013 Views

FLIGHT TRAINING INSTRUCTION T-45 WEAPONS/STRIKE - Cnatra

FLIGHT TRAINING INSTRUCTION T-45 WEAPONS/STRIKE - Cnatra

FLIGHT TRAINING INSTRUCTION T-45 WEAPONS/STRIKE - Cnatra

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

T-<strong>45</strong> <strong>WEAPONS</strong>/<strong>STRIKE</strong> CHAPTER ONE<br />

T-<strong>45</strong>A VIDEO CAMERA SYSTEM (VCS)<br />

Figure 1-15 Declutter Modes<br />

The video camera system (VCS) records the view through the HUD. The sealed video module is<br />

placed in the video interface module located in the aft cockpit, right console, and is secured by<br />

placing the locking bar in the LOCKED position. In the RECORD position, the VCR begins<br />

recording shortly after power is applied to the aircraft. With the aft cockpit VCR switch in STBY<br />

or OFF, the forward cockpit VCR switch controls VCR operation. The forward cockpit VCR<br />

switch has three positions:<br />

1. ON, VCR starts recording;<br />

2. OFF, VCR operation is controlled by the aft cockpit;<br />

3. AUTO, VCR starts recording when the master armament switch is set to ARM.<br />

T-<strong>45</strong>A VCR SETUP<br />

1. Place the entire sealed video module in the video interface module (VIM) located in the aft<br />

cockpit, right console, and secure it with the locking bar. Then place the aft cockpit VCR switch<br />

in STBY or OFF as briefed.<br />

2. Check that the forward cockpit VCR switch is set according to instructions: ON, VCR<br />

starts recording; OFF, VCR operation is controlled by the aft cockpit; AUTO, VCR starts<br />

recording when the master armament switch is set to ARM.<br />

T-<strong>45</strong> ARMAMENT CONTROLS AND INDICATORS 1-21

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!