360 Modena gear box manual - All Ferraris

To adjust the length of the gearshift cable (C), detach the gearbox side terminal
and, after loosening the check-nut (6), tighten or unscrew the terminal on the cable.
Reassemble the terminal on the gearshift, according to the specifications reported in
points 4,5 and 6.
10 Check that the gearshift engages correctly, and make sure there is a minimum
span of 1 mm, between the control lever and the selector's under-plate.
11 Check the various gearshifts engage correctly by moving them diagonally (for
example: 2st-3nd-2nd and 4th-5th-4th).
If the gearshift lever sticks between 2nd –3rd –2nd (see Fig.2), it is necessary to
lengthen the selection cable (B+).