360 Modena gear box manual - All Ferraris

and therefore are always replaced in pairs.
• Position the joints onto the cables, on the gearbox side, in the same condition as
those replaced, keeping the lock-nuts loose.
Insert the new cables from the passenger compartment, positioning the cable hitch
(5) so that the cable (B, light blue) is in the upper part and make sure they do not
intertwine.
• Screw down the joints on the lever housing side almost completely, leaving only a
few threads after the lock-nuts (6).
• Insert the joint (4) of the coupling cable (C) on the ball end of the control lever.
• Assemble a new pivot (3) and fasten the joint of the cable (B) onto the side lever.