360 Modena gear box manual - All Ferraris

• Press the clutch pedal and simultaneously unscrew the bleeding union; carry out
the necessary number of cycles until only fluid comes out of the pipe, without air
bubbles.
• Tighten the bleeding union to the prescribed torque and re-assemble the protection
plug.
• Fill-up the fluid in the tank to the "MAX" level.
• Re-assemble the parts removed during the procedure.
Electronically Controlled gerabox
Clutch Draining
In the system, as well as the union (1) on the gearbox (see mechanical gearbox),
there is also a second union (2) on the block for the clutch pipe rapid coupling, located
in position with the right-hand rear fastening point of the gearbox support frame.