360 Modena gear box manual - All Ferraris

NOTES
On the engines installed in vehicles produced prior to this assembly no., when replacing the clutch, we
recommend you replace the mount (6) and the stud bolts (16) with the new parts.
• Slide off the bush bearing (7) together with the gaskets. Remember to keep the two thrust bearing
springs.
FROM Ass.ly No. 50913 new light blue sliding rings (A) and (B) have been introduced to replace the
orange ones (no longer available). The new rings offer improved reliability at high temperatures and
withstand the oil’s aggressive action better.
With the introduction of the new rings, the diameter of the relative seats on the bushing inside the
thrust bearing (C) has been altered.
Our Spare Parts Department will no longer stock and deliver the complete thrust bearing, only the
individual components.