360 Modena gear box manual - All Ferraris

Unscrew the four fastening screws with flexible washers to remove the intermediate plate (2).
Once removed, rotate the driving shaft (P) to check that there is no interference or irregularity in its
rotation.
Also check that the driving ends both on the pump shaft and on the driving pin (52) are in good
condition.
For cleaning and replacing the mesh filter ( A 3.02).
The oil/water heat exchanger, fitted to the gearbox housing with flexible piping, is used for cooling
the oil flessibili ( B 5.06).
The gearbox's internal components are lubricated through the use of ducts machined in the casting
of the gearbox housing and the covers and on the main and lay shafts.
The said ducts must show no signs of clogging and must be spotlessly clean for the unit to work
correctly.