360 Modena gear box manual - All Ferraris

• When assembling the 3 rd - 4 th and 5 th - 6 th speed synchroniser rings, pay attention to the
direction of the inner ring driving teeth (L) in respect of the outer ring (E).
• When assembling the reverse gear synchroniser (46), pay attention to the direction of the body
(D), making sure that the lubrication millings face the gearing, and to the sliding sleeve (A), whose
grooved side must face the gearing. Also take care that the retaining washer (47) is mounted with its
outer raised edge facing the gear.
Rods with forks
The 5 th - 6 th speed fork, like the reverse gear ones, are supplied as spare parts coupled to their
relative rods. The Manufacturer carries out the drilling and the fixing using flexible pins, with the
components already coupled: this system guarantees a precise and stable coupling.