360 Modena gear box manual - All Ferraris

• When re-assembling, use the punch AV 3259 to bring the race flush with the housing seat.
• Fasten the race (F) with the retaining components, applying the recommended locking product
on the fixing screw (64) and tightening it to the prescribed torque.
Covers
The roller casing (51) for the fork support rod is installed on the rear cover (3) and the O-rings (62)
are positioned on the pins for oil delivery to the gearbox shafts. Before re-assembly, grease the Orings
and the shoulder ring (50), positioning it between the raised parts of the cover.
• To replace the roller casing (51), use the previously utilised bushing extractor ASAG 468S11.
In the event that the lower inspection cover or the tapered plugs (58) are removed, before refitting,
apply CAF4 sealant to the coupling surface on the housing and LOCTITE 510 to the thread on the
plugs.