Exhaust rattle / buzzing noise during acceleration - JustAnswer

More documents

Recommendations

Info

NOTE: • Breaks or cracks may be found anywhere on the bracket body or at the mounting bolt holes. • Cracks appear in a “hair line” form. Example of break and crack on rear bracket. Break Crack Figure 2 Example of break on front bracket. Figure 3 4/6 Break
2. If either of the support brackets are broken/cracked, or have loose or missing bolts, replace both brackets and all their bolts as follows: • Support brackets and bolts are listed in the PARTS INFORMATION section of this bulletin. a. Remove the original bolts and brackets and discard. b. If the vehicle is equipped with a 5-speed automatic transmission, install the exhaust tube mounting brackets (upper and lower) and flange nuts listed in the PARTS INFORMATION section of this bulletin. See Figures 4, 5, and 6. • Torque each nut to 30.4 - 39.2 N·m (3.1 – 4.0 kg-m, 22.4 – 28.9 ft-lb) Figure 5 Install upper bracket around exhaust tube. <strong>Exhaust</strong> tube mounting bracket - Lower 5/6 Figure 4 <strong>Exhaust</strong> tube mounting bracket - Upper Flange nuts Figure 5 Attach lower Figure 6 bracket to upper bracket using two flange nuts.
Page 1 and 2: Classification: Reference: Date: EM
Page 3: SERVICE PROCEDURE 1. Inspect both s

Exhaust rattle / buzzing noise during acceleration - JustAnswer

Create successful ePaper yourself

Delete template?

Save as template?