Harmonic CLEARcut - Harmonic Inc

Appendix C Restoring CLEARcut Studio Installing the Vela Decoder Card Software
3. Click OK.
4. Right-click the Local PC icon, and select Properties from the shortcut menu.
5. Click the .... button beside the IP Address field, and select the management IP address.
.
6. Click OK.
Figure C-2: Selecting the local PC IP address in NMX
7. Click the green arrow button to start the server.
The status bullets beside each element manager turn yellow, then green when the server
starts.
8. After the server starts, click the red hand to shut it down.
The server should not be running when you install CLEARcut Studio.
9. Close Domain Manager.
C.5 Installing the Vela Decoder Card Software
To install the Vela software:
1. For IBM x3650 M2 server: Insert the CLEARcut Studio application DVD.
For Dell PowerEdge 2950 server: Insert the CLEARcut Studio installation CD.
2. For IBM x3650 M2 server: Navigate to the directory Software\\Support_Software\VelaSystemSoftware on the DVD.
For Dell PowerEdge 2950 server: Navigate to the directory
Support_Software\VelaSystemSoftware on the CD.
3. Locate and run Setup.exe. Select Install Vela System Software.
4. Follow the onscreen instructions to install the Vela software.
5. During installation, the installer may prompt for installing the CineView HD Pro Decoder
or CineView HD Pro Decoder G10 driver. Simply press Continue Anyway to proceed
with installation.
6. When installation is complete, restart the computer.
NOTE: During the restart, some warnings may show during the Windows startup. Click OK to close those
warnings.
The CLEARcut Studio application DVD or CLEARcut installation CD includes Vela
documentation.
© 2011 Harmonic Inc. 36 CLEARcut, Version 3.8, Rev E