EMC Simulations of Power Electronic Devices and Systems - serec

Recommendations

Info

Introduction PE in Power Supply & Distribution © ABB Group June 2, 2010 | Slide 6 Generator frequency converter Wind parks StatComs for grid code HVDC for shore connection
Introduction EMC / EMI in Power Electronics © ABB Group June 2, 2010 | Slide 7 EMC (compatibility) Standards compliancy Switching harmonics / THD (up to 25 th / 40 th harmonic) Conducted emissions (150 kHz – 30 MHz) Radiated emissions (30 MHz – 1 GHz) EMI (interferences) Malfunction through self disturbance Performance de-rating …through load imbalance …through voltage/currents overshoots Low ruggedness in short circuit mode Electric stress through ringing and oscillations
Page 1 and 2: Didier Cottet, Stanislav Skibin, Iv
Page 3 and 4: Introduction PE in Power Supply & D
Page 5: Introduction PE in Power Supply & D
Page 9 and 10: Methodology PEEC - Partial Element
Page 11 and 12: Outline © ABB Group June 2, 2010 |
Page 13 and 14: Modeling Package Macro Modeling ©
Page 15 and 16: Results Switching Analysis © ABB G
Page 17 and 18: Outline © ABB Group June 2, 2010 |
Page 19 and 20: Case Study Medium Voltage Static Fr
Page 21 and 22: Modeling Bus Bar Thickness vs. Freq
Page 23 and 24: Model Improvement Acceleration © A
Page 25 and 26: Model Improvement Decomposed (Segme
Page 27 and 28: Results Impedance Discussion © ABB
Page 29 and 30: Conclusion © ABB Group June 2, 201

EMC Simulations of Power Electronic Devices and Systems - serec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?