We take pleasure in introducing ourselves - Automobile Training ...

Recommendations

Info

Model No. MT-Z25 COMMON RAIL FLOW METER Measures the return flow in the injectors Supplied with adaptors suitable Bosch, Delphi, Denso and Siemens Injectors Model No. MT-Z26 CAR CRASH EQUIPMENT CHASSISLINER - LIFT N RAK Model No. MT-Z27 MIG WELDING Input voltage : 3 Phase 400V Welding current range: 20 - 220 Amps Weldable wires: Steel wire: 0.6 - 1 mm Stainless Steel Wire: 0.8 - 1 mm Aluminium Mg-Si Wire: 0.8 - 1 mm 1. 3500 Kg Scissor lift 2. Tilt N Turn Tower for pulling upto 8 Tons 3. Includes 4 Nos adjustable Unibody tie down clamps 4. 9 feet Bed length, 38" Bed Width and 37" Lifting Height 5. With Ramp for lower profile vehicles 6. Suitable for Passenger cars 7. Supplied with the Tools for pulling Model No. MT-Z28 PLASMA CUTTER Input Voltage 220 V Cutting Current 5 - 40 Amps Max. Thickness of the sheet for cutting 12 mm Air Pressure required 3. 5 - 5 Bar PAGE 60
Model No. MT-Z29 SPOT WELDING Synergetic Adjustment Automatically sets the setting according the selected tool & sheet thickness Continuous Single spot and Pulsed single spot Adjustable Time and Spot Welding Current STORE button to save the Customer settings Compressed air pressure to low mechanical strength Overload protection Pneumatic Gun supplied as a standard accessory Model No. MT-Z30 HOT WATER CLEANER New professional handgrip with EPT system and SWIVEL joint to prevent hose twisting. 10 m H.P. hose with screw coupling, 70 cm stainless steel lance, H.P. nozzle. Remote control ..................................... total stop TSR Pressure - bar ........................................ 30 ÷ 175 Volume - l/h ........................................... 400 ÷ 800 Outlet water temperature - C° ........ 30 ÷ 140 Oil consumption - kg/h ........................ 5,8 Voltage - Ph-V-Hz ................................. 3 ~ 400V ~ 50Hz Absorbed power - KW ........................ 5,5 RPM ....................................................... 1400 Dimensions - LxPxH ............................ 105 x 70 x 88 Weight - Kg .......................................... 105 Model No. MT-Z31 SPARK PLUG CLEANER AND TESTER Spark Plug Cleaner works on the Pneumatic air supply with the requirement of Air Pressure 8 - 10 kg/cm². It performs abrasive sand blast cleaning first and then air cleaning. The cleaned spark plug is then fitted in the hole and the HT cable is connected. The performance of the spark can be viewed in the inspection hole Suitable for M10, M14 and M18 Plugs and supplied with ½ Kg of abrasive sand material Specification Power Supply: 220V AC, 50 Hz Pneumatic Supply required: 8 – 10 Kg/cm² Accessories Adaptor : 3 Nos. (suitable for M10,M14,M18) Abrasive Sand: 500 gms. PAGE 61
Page 1 and 2:
` PAGE 1
Page 3 and 4:
PAGE 3
Page 5 and 6:
CUT SECTION COMPLETE CHASSIS WITH E
Page 7 and 8:
CUT SECTION COMPLETE CHASSIS WITHOU
Page 9 and 10: C Model No.MT-C00 MODEL OF CUT SECT
Page 11 and 12: Model No. Description MT-D01 CUT-SE
Page 13 and 14: F Model No.MT-F01 CUT SECTION MODEL
Page 15 and 16: Model No. MT-G06 CUT SECTION MODEL
Page 17 and 18: H Model No.MT-H00 CUT SECTION MODEL
Page 19 and 20: Model NO. MT-H15. TRAINING PLATFORM
Page 21 and 22: Model No.MT-J02 CUT SECTION MODEL O
Page 23 and 24: Model No. MT-K05 CUT SECTION MODEL
Page 25 and 26: Model No. MT-L02 CUT SECTION MODEL
Page 27 and 28: Model No. MT-L07 DEMONSTRATION BOAR
Page 29 and 30: Model No. MT-L13 DEMONSTRATION BOAR
Page 31 and 32: N Model No. MT-N01. CUT SECTION MOD
Page 33 and 34: Model No. MT-N07. CUT SECTION MODEL
Page 35 and 36: Model No. Description MT-P01 Self s
Page 37 and 38: R Model No. MT-R00 FOUR STROKE PETR
Page 39 and 40: Model No. Description MT-T01 Ambass
Page 41 and 42: 3. Detection terminals for operator
Page 43 and 44: Model No. MT-X02 INSTRUCTION BOARD
Page 45 and 46: 8. Set the line break, grounding sh
Page 47 and 48: 1. Real and operatable starting sys
Page 49 and 50: COMPUTERIZED MODULE Parameters meas
Page 51 and 52: Model No. MT-Y04 FOUR STROKE SINGLE
Page 53 and 54: Z TOOLS AND EQUIPMENTS Model No. MT
Page 55 and 56: Model No. MT-Z07 LOW RAISE LIFT Lif
Page 57 and 58: Model No. MT-Z14 MULTISCAN FOR PETR
Page 59: Model No. MT-Z21 GLOW PLUG TESTER T
Page 63 and 64: Model No. MT-Z36 CAR WASHER Single
Page 65 and 66: Note: we can also supply any other
show all

We take pleasure in introducing ourselves - Automobile Training ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?