We take pleasure in introducing ourselves - Automobile Training ...

Recommendations

Info

E Model No.MT-E00\ MODEL OF CUT SECTIONED ENGINE ASSEMBLY WITH CLUTCH AND GEAR BOX (TWO WHEELER )(WORKING): The model is made out of full size original, used engine, Gear box, clutch etc The Maximum parts and accessories of the engine like cylinder block, Cylinder heads, valve/ports, piston, Connecting rod, inlet and Exhaust manifolds, throttle body, Fuel system, Lubrication system, Clutch, Gear box etc are sectioned to clearly demonstrate the internal constructional details. The engine is coupled with Gear Box. The gearbox is coupled to the engine through the clutch and gear selection is done by shifting the gear shift control lever. The whole system is mounted on to a sturdy iron frame, and the frame will be provided with caster wheels for easy movement of the entire model. Suitable color imported painting will be carried out along with Miracle coating for the model will be done for extra gloss and shine. The painting will be carried out in such a way that different colors will be use for different components such as Air, oil, petrol, exhaust identification of sectioned area etc according to the colors code for easy identification of different systems and mechanisms. All the hardware’s and gears will be suitably electroplated. A switch box with indicator switch will be provided . Model No. Description MT-E01 CUT-SECTION MODEL OF SINGLE CYLINDER PETROL ENGINE (TWO STROKE) MT-E02 CUT-SECTION MODEL OF SINGLE CYLINDER PETROL ENGINE (FOUR STROKE) PAGE 12
F Model No.MT-F01 CUT SECTION MODEL OF TWO STROKE SINGLE CYLINDER DIESEL ENGINES. The model is made out of new single cylinder Diesel engine. Maximum parts such as piston, cylinder, cylinder head, inlet and Exhaust manifolds, Fuel Injection pump, oil pump, Fuel Filter, Injector, etc., are sectioned to show the internal constructional details of the engine. The working of individual parts and accessories like Valves, piston, pumps, Crank, Camshaft, etc., can be demonstrated. This model is fixed on a sturdy iron frame. G Model No.MT-G01 CUT SECTION MODEL OF SYNCHROMESH GEAR BOX (WORKING): Model No. MT-G02 This is made out of original full size used gearbox, suitably sectioned to show the details of gear mechanism of forward and reverse speeds. A Crank lever is provided to demonstrate the mechanism. Complete unit is mounted on a sturdy iron frame. CUT SECTION MODEL OF GEAR BOX WITH DIFFERENTIAL (TRANSAXLE) (WORKING): This is made out of original full size used gearbox, suitably sectioned to show the details of gear mechanism of forward and reverse speeds. A Crank lever is provided to demonstrate the mechanism. Complete unit is mounted on a sturdy iron frame. PAGE 13
Page 1 and 2: ` PAGE 1
Page 3 and 4: PAGE 3
Page 5 and 6: CUT SECTION COMPLETE CHASSIS WITH E
Page 7 and 8: CUT SECTION COMPLETE CHASSIS WITHOU
Page 9 and 10: C Model No.MT-C00 MODEL OF CUT SECT
Page 11: Model No. Description MT-D01 CUT-SE
Page 15 and 16: Model No. MT-G06 CUT SECTION MODEL
Page 17 and 18: H Model No.MT-H00 CUT SECTION MODEL
Page 19 and 20: Model NO. MT-H15. TRAINING PLATFORM
Page 21 and 22: Model No.MT-J02 CUT SECTION MODEL O
Page 23 and 24: Model No. MT-K05 CUT SECTION MODEL
Page 25 and 26: Model No. MT-L02 CUT SECTION MODEL
Page 27 and 28: Model No. MT-L07 DEMONSTRATION BOAR
Page 29 and 30: Model No. MT-L13 DEMONSTRATION BOAR
Page 31 and 32: N Model No. MT-N01. CUT SECTION MOD
Page 33 and 34: Model No. MT-N07. CUT SECTION MODEL
Page 35 and 36: Model No. Description MT-P01 Self s
Page 37 and 38: R Model No. MT-R00 FOUR STROKE PETR
Page 39 and 40: Model No. Description MT-T01 Ambass
Page 41 and 42: 3. Detection terminals for operator
Page 43 and 44: Model No. MT-X02 INSTRUCTION BOARD
Page 45 and 46: 8. Set the line break, grounding sh
Page 47 and 48: 1. Real and operatable starting sys
Page 49 and 50: COMPUTERIZED MODULE Parameters meas
Page 51 and 52: Model No. MT-Y04 FOUR STROKE SINGLE
Page 53 and 54: Z TOOLS AND EQUIPMENTS Model No. MT
Page 55 and 56: Model No. MT-Z07 LOW RAISE LIFT Lif
Page 57 and 58: Model No. MT-Z14 MULTISCAN FOR PETR
Page 59 and 60: Model No. MT-Z21 GLOW PLUG TESTER T
Page 61 and 62: Model No. MT-Z29 SPOT WELDING Syner
Page 63 and 64:
Model No. MT-Z36 CAR WASHER Single
Page 65 and 66:
Note: we can also supply any other
show all

We take pleasure in introducing ourselves - Automobile Training ...

Create successful ePaper yourself

Delete template?

Save as template?