spindle tooling for automatics, turret lathes and rotary - Hardinge Inc.

Spindle Tooling for Automatics
1
Description
Hardinge
Part
Number Figure Style
3
A
B
Dimensions
C
D
Machine Tool Builder's
Rated Capacity
Pad Back
Collet
Part Bearing Overall Head
Number Diameter Length Diameter Thread Round Hexagon Square
WICKMAN: 3 1 ⁄4" Capacity – Six Spindle (Larger Capacity Solid Collets Available up to 3 1 ⁄4" Round, 2 13 ⁄16" Hex, 2 5 ⁄16" Square)
4.187" 7.750" 5.005" 31 ⁄4" 213 ⁄16" 219 ⁄64"
Collet, Solid 4479 1 (106.35) (196.85) (127.13) 3.966" x 16 RH (82.55) (71.44) (58.34)
4.187" 7.750" 5.005" 3" 219 ⁄32" 27 ⁄64"
Collet, Style “S” Master 5307 1 S30 56153 (106.35) (196.85) (127.13) 3.966" x 16 RH (76.20) (65.88) (53.58)
3.625" 7.250" — 31 ⁄4" 213 ⁄16" 219 ⁄64"
Feed Finger, Solid 4481 3 (92.08) (184.15) — 3.492" x 22 LH (82.55) (71.44) (58.34)
3.625" 7.250" — 3" 219 ⁄32" 27 ⁄64"
Feed Finger, Style “B” Master 6363 3 B33 6679 (92.08) (184.15) — 3.492" x 22 LH (76.20) (65.88) (53.58)
WICKMAN: 3 1 ⁄2" Capacity – Single and Four Spindle (Larger Capacity Solid Collets Available up to 3 29 ⁄32" Round, 3 1 ⁄8" Hex, 2 3 ⁄4" Square)
4.370" 6.500" 5.315" 31 ⁄2" 31 ⁄64" 215 ⁄32"
Collet, Solid MP3773 1 (111.00) (165.10) (135.00) 4.187" x 18 RH (88.90) (76.60) (62.71)
4.370" 6.500" 5.315" 31 ⁄2" 31 ⁄64" 215 ⁄32"
Collet, Style “S” Master 5309 1 S35 56173 (111.00) (165.10) (135.00) 4.187" x 18 RH (88.90) (76.60) (62.71)
4.370" 6.500" 5.315" 31 ⁄2" 31 ⁄64" 215 ⁄32"
Collet, Martin Master MP3955 1 M35 59213 (111.00) (165.10) (135.00) 4.187" x 18 RH (88.90) (76.60) (62.71)
3.870" 6.750" — 31 ⁄2" 31 ⁄64" 215 ⁄32"
Feed Finger, Solid 4203 3 (98.30) (171.45) — 3.765" x 24 LH (88.90) (76.60) (62.71)
3.870" 6.750" — 31 ⁄8" 245 ⁄64" 213 ⁄64"
Feed Finger, Style “B” Master 6141 3 B35 6681 (98.30) (171.45) — 3.765" x 24 LH (79.38) (68.66) (55.96)
3.870" 6.750" — 31 ⁄8" 245 ⁄64" 213 ⁄64"
Feed Finger, Style “B’ Master MP2894-W 3 B35 6681 (98.30) (171.45) — 3.765" x 24 LH (79.38) (68.66) (55.96)
3.870" 6.750" — 31 ⁄4" 213 ⁄16" 219 ⁄64"
Feed Finger, Style “A” Master 6417 3 A35 6751 (98.30) (171.45) — 3.765" x 24 LH (82.55) (71.44) (58.34)
WICKMAN: 4 1 ⁄8" Capacity – Six Spindle
5.062" 8.500" 6.005" 41 ⁄8" 39 ⁄16" 27 ⁄8"
Collet, Solid MP3702 2 (128.58) (215.90) (152.53) 4.844" x 16 RH (104.78) (90.49) (73.82)
5.062" 8.500" 6.005" 4" 329 ⁄64" 253 ⁄64"
Collet, Style “S” Master MP3759 2 S40 56193 (128.58) (215.90) (152.53) 4.844" x 16 RH (101.60) (87.71) (71.83)
3 - Master Collet Pads available in smooth or serrated order holes
NOTE: Millimeters in parentheses.
Collets and feed fingers available for larger capacity machines.
Collets available in smooth or serrated order holes.
For feed finger pads, styles “A” and “B” available in hardened steel, nickel cast iron,
bronze, or nylon; style “AF” in hardened steel or chrome plated.
S-pads available in hardened and ground, semi-hard emergency and soft emergency.
Martin Master Collet & Pad
Hardinge Inc. One Hardinge Drive | P.O. Box 1507 | Elmira, New York 14902-1507 USA
USA: 800-843-8801 or 607-378-4022 | Canada: 800-468-5946 | Fax: 607-734-3886
To Order Online: www.hardingetooling.com | Corporate Homepage: www.hardinge.com | E-mail: info@hardingetooling.com
2
97
WICKMAN