full specification guide - Shenandoah Cabinetry

178
PANELS, FILLERS & MOLDINGS
PANELS, FILLERS & MOLDINGS: Molding Stacks
Molding Stacks
MS Traditional 100
Individual sticks of molding are made
from individual pieces of wood and may
vary in color.
Finished Molding Stack Diagram also
available in 20-20. See pages 180-188
for specifications on individual moldings
included in molding stacks.
Molding Stacks are ordered as a kit, and if
returned must be returned as a kit.
MS TRADITIONAL 100
● Molding Stacks shipped unassembled
● Molding Stacks to be cut, assembled and field
installed at job site
● Only one finish can be specified per Molding Stack
● Pre-packaged molding kit includes:
• TCCM8 WD
• CBE8
• HWC 3/4X3/4X96
● Finished stack molding diagram included
MS Traditional 300
MS TRADITIONAL 300
● Molding Stacks shipped unassembled
● Molding Stacks to be cut, assembled and field
installed at job site
● Only one finish can be specified per Molding Stack
● Pre-packaged molding kit includes:
• TCCM8 WD • CBE8 (2)
• EDM8 • FSS396 (2)
• HWC 3/4X3/4X96
● Finished stack molding diagram included
Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs
MS Traditional 200
MS TRADITIONAL 200
● Molding Stacks shipped unassembled
● Molding Stacks to be cut, assembled and field
installed at job site
● Only one finish can be specified per Molding Stack
● Pre-packaged molding kit includes:
• TCCM8 WD • RM8
• FSS396 • TBM8
• HWC 3/4X3/4X96
● Finished stack molding diagram included
MS Contemporary 100
MS CONTEMPORARY 100
● Molding Stacks shipped unassembled
● Molding Stacks to be cut, assembled and field
installed at job site
● Only one finish can be specified per Molding Stack
● Pre-packaged molding kit includes:
• ACM8
• CTM8 WD
• HWC 3/4X3/4X96
● Finished stack molding diagram included