full specification guide - Shenandoah Cabinetry

More documents

Recommendations

Info

152 VANITy CABINETS VANITy CABINETS: 31 1 ⁄8” Standard Height 31 1 ⁄8” Standard Height Vanity Cabinets Standard Height Vanity cabinets are 31 1 ⁄8” high, 12” to 60” wide and 18“ or 20 3 ⁄4” deep. Cathedral doors are not available on Standard Height Vanity Base cabinets. Single door Standard Height Vanity cabinets are hinged left and can be reversed in the field. Inset toe kick construction requires BTK8 matching toe kick—must be ordered separately. Refer to sink manufacturer’s specifications for adequate clearance and required installation materials. When placing a Standard Height Vanity Sink Base cabinet in a design, select a cabinet at least 3” wider than the sink to allow for installation clips. Review manufacturer’s specifications for dimensions and adequate clearance requirements. VB12 VB15 VB18 VB21 Vanity Base 1 Door, 1 Drawer • 31 1 ⁄8” High ● No shelf ● APC ● CFO ● FE ● PVS ● RD ● RTK Vanity Base 1 Factory Installed Wastebasket • 31 1 ⁄8” High FACTORY INSTALLED VWBT18 ● Full height door ● Features one white plastic 35 quart capacity bin ● Wastebasket rests in a natural maple plywood frame ● Frame slides on full access glides ● Includes bag storage tray at rear ● Decorative hardware strongly recommended ● Storage tray NOT dishwasher safe ● Wastebasket lid may be ordered separately ● Not available with CushionClose Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs ● APC ● FE ● PVS ● RTK Vanity Base 2 Butt Doors, 1 Drawer • 31 1 ⁄8” High VB24 BUTT VB27 BUTT VB30 BUTT VB33 BUTT VB36 BUTT ● No shelf VDB12 VDB15 VDB18 VDB21 VDB24 ● 1 large and 2 standard drawers ● APC ● CFO ● FE ● PVS ● RD ● RTK Vanity Drawer Base 3 Drawers • 31 1 ⁄8” High ● APC ● CFO ● FE ● PVS ● RD ● RTK
VSB15 VSB18 VSB21 ● No shelf ● Subtract 1 1 ⁄2” from depth and width for available sink bowl opening VSB42 Vanity Sink Base 1 Door, 1 Panel • 31 1 ⁄8” High ● APC ● CFO ● FE ● PVS ● RD ● RTK Vanity Sink Base 2 Doors, 2 Panels • 31 1 ⁄8” High ● No shelf ● APC ● CFO ● FE ● PVS ● RD ● RTK ● Subtract 1 1 ⁄2” from depth and width for available sink bowl opening Vanity Sink Base 2 Butt Doors, 1 Panel • 31 1 ⁄8” High VSB24 BUTT VSB27 BUTT VSB30 BUTT VSB33 BUTT VSB36 BUTT ● No shelf ● APC ● CFO ● FE ● PVS ● RD ● RTK ● Subtract 1 1 ⁄2” from depth and width for available sink bowl opening VSB48 ● No shelf VANITy CABINETS: 31 1 ⁄8” Standard Height Vanity Sink Base 3 Doors, 3 Panels • 31 1 ⁄8” High ● APC ● CFO ● FE ● PVS ● RD ● RTK ● Subtract 1 1 ⁄2” from depth and width for available sink bowl opening ● Hinged as shown – center door may be reversed in field Vanity Sink Base – 18” Deep 2 Butt Doors, 1 Panel • 31 1 ⁄8” High VSB2418 BUTT VSB3018 BUTT VSB3618 BUTT ● No shelf ● APC ● CFO ● FE ● PVS ● RD ● RTK ● Subtract 1 1 ⁄2” from depth and width for available sink bowl opening Vanity Sink Base 4 Butt Doors, 2 Panels • 31 1 ⁄8” High A VSB54 BUTT 27” VSB60 BUTT 30” VSB54 BUTT VSB60 BUTT ● No shelf ● APC ● CFO ● FE ● PVS ● RD ● RTK ● Subtract 1 1 ⁄2” from depth and dimension A for available sink bowl openings Shenandoah Cabinetry Specification Guide 153 VANITy CABINETS
Page 1 and 2:
Grove in maple Linen Specification
Page 3 and 4:
Contents Warranty .................
Page 5 and 6:
Door Style Collections 5 Piece Smal
Page 7 and 8:
Portage Collection With applied mol
Page 9 and 10:
Species: Maple Door Panel: Solid Ra
Page 11 and 12:
1” Detailed Drawer Front WINCHEST
Page 13 and 14:
Drawer Front CHARLESTON WHITE THERM
Page 15 and 16:
SOLANA WHITE THERMO FOIL Species: W
Page 17 and 18:
Mission Collection with Drawer Fron
Page 19 and 20:
Breckenridge Collection The simplic
Page 21 and 22:
Bluemont Collection With veneer rai
Page 23 and 24:
Drawer Front GROVE IN WHITE Species
Page 25 and 26:
DOOR STyLES: Notes Shenandoah Cabin
Page 27 and 28:
Standard Cabinet Specifications 27
Page 29 and 30:
Door Construction Wood doors consis
Page 31 and 32:
STANDARD CABINET SPECIFICATIONS: Wo
Page 33 and 34:
STANDARD CABINET SPECIFICATIONS: Ba
Page 35 and 36:
STANDARD CABINET SPECIFICATIONS: Wa
Page 37 and 38:
Utility Cabinet STANDARD CABINET SP
Page 39 and 40:
STANDARD CABINET SPECIFICATIONS: In
Page 41 and 42:
Construction Options 41 CONSTRUCTIO
Page 43 and 44:
1. When a bullet ● is included wi
Page 45 and 46:
Cabinet Sides Cabinet Floor Cabinet
Page 47 and 48:
CONSTRUCTION OPTIONS: Premium Finis
Page 49 and 50:
Increased Depth Cabinet Option The
Page 51 and 52:
CONSTRUCTION OPTIONS: Matching Inte
Page 53 and 54:
CONSTRUCTION OPTIONS: Mullion Frame
Page 55 and 56:
15”, 18” or 24” High Wall Cab
Page 57 and 58:
■ MFD ■ OFD ● 1 ⁄8” thick
Page 59 and 60:
■ MFD ■ OFD ■ MFD ■ OFD Fro
Page 61 and 62:
Dimensions SKU Coding Wall Cabinets
Page 63 and 64:
W2436 BUTT W2736 BUTT W3036 BUTT W3
Page 65 and 66:
W3021 W3321 W3621 ■ W3018 ■ W33
Page 67 and 68:
Wall Cabinets with Spice Rack Wall
Page 69 and 70:
W3018 X 24 DP W3318 X 24 DP W3618 X
Page 71 and 72:
Microwave Wall Cabinets Microwave W
Page 73 and 74:
Peninsula Wall Cabinets Peninsula W
Page 75 and 76:
■ PW3024 ■ PW3624 PW4224 ● 1
Page 77 and 78:
BLW24/2736 BLW30/3336 BLW33/3636
Page 79 and 80:
Full Overlay (FOL) Door Styles Full
Page 81 and 82:
Full Overlay (FOL) Door Styles Blin
Page 83 and 84:
Corner Wall Cabinets Corner Wall ca
Page 85 and 86:
FACTORY INSTALLED CWS2430 Corner Wa
Page 87 and 88:
Specialty Wall Cabinets SDC18 SDC24
Page 89 and 90:
Straight Appliance Garage AGS24 ●
Page 91 and 92:
RHVENT 250 Range Hood Blower 250 CF
Page 93 and 94:
V36 SC V48 SC V60 SC V72 SC ● Fie
Page 95 and 96:
Dimensions SKU Coding Base Cabinets
Page 97 and 98:
B12 B15 B18 B21 B24 Base Cabinet 1
Page 99 and 100:
FACTORY INSTALLED B45 3T Base Cabin
Page 101 and 102: Base Cabinet 1 Door, 1 Drawer with
Page 103 and 104: Chopping Block • CHB Replace * wi
Page 105 and 106: Drawer Base Cabinets Drawer Base ca
Page 107 and 108: BASE CABINETS: Drawer Base with Fac
Page 109 and 110: SB45 ● No shelf ● Full height b
Page 111 and 112: Sink Base Cabinets with Factory Ins
Page 113 and 114: FACTORY INSTALLED 30” Sink Base M
Page 115 and 116: Full Overlay (FOL) Door Styles Full
Page 117 and 118: Corner Base Cabinets Cathedral door
Page 119 and 120: Asymmetrical Base Super Susan with
Page 121 and 122: Specialty Base Cabinet Inset toe ki
Page 123 and 124: Base Cabinet Accessories CHBK15 CHB
Page 125 and 126: Cutlery Divider Kit Number of Secti
Page 127 and 128: STB Sliding Towel Bar ● Field ins
Page 129 and 130: Desk Cabinets & Bookshelves Dimensi
Page 131 and 132: DDR1221 DDR1521 DDR1821 DDR2121 DDR
Page 133 and 134: BSPLY1884 BSPLY2484 BSPLY3084 BSPLY
Page 135 and 136: Dimensions Tall Cabinets Width Dept
Page 137 and 138: UT1212 X 84 AS UT1512 X 84 AS UT181
Page 139 and 140: Utility Cabinet 24” Deep • 4 Bu
Page 141 and 142: Oven Cabinets Oven cabinets range i
Page 143 and 144: Single Oven Cabinet 84” High •
Page 145 and 146: Double Oven Cabinet 84” High •
Page 147 and 148: Utility Cabinet Accessories PCSK36
Page 149 and 150: Tall Cabinet Deep Roll Out Tray Kit
Page 151: Dimensions Vanity Cabinets Width He
Page 155 and 156: A B VSDB24 12” 12” VSDB27 15”
Page 157 and 158: 34 1 ⁄2” Base Height Vanity Cab
Page 159 and 160: Vanity Sink Base 2 Butt Doors, 2 Dr
Page 161 and 162: Specialty Vanity Cabinet VC2436 BUT
Page 163 and 164: Vanity Linen Cabinet 2 Doors with A
Page 165 and 166: Panels, Fillers & Moldings All pane
Page 167 and 168: End Panel A B WEP30 11 1 ⁄4” 30
Page 169 and 170: DORF30 Drop-In Range Front ● Fiel
Page 171 and 172: Decorator Matching Doors Tall Cabin
Page 173 and 174: BOF3 DOF3 TOF384 TOF390 TOF396 VOF3
Page 175 and 176: WBC31530 WBC31542 WBC31560 WFC31530
Page 177 and 178: FB3X6 ASTER BB3X6 ASTER Aster Block
Page 179 and 180: MS Contemporary 200 MS CONTEMPORARY
Page 181 and 182: CCM8 VNR Classic Crown Molding ●
Page 183 and 184: EDM8 SDE8 WD Egg and Dart Molding
Page 185 and 186: SAM8 WD TBM8 Shaker Accent Molding
Page 187 and 188: Angled Outside Corner Molding AOSC8
Page 189 and 190: PANELS, FILLERS & MOLDINGS: Posts,
Page 191 and 192: PANELS, FILLERS & MOLDINGS: Posts,
Page 193 and 194: SGO LGO PANELS, FILLERS & MOLDINGS:
Page 195 and 196: ALO PANELS, FILLERS & MOLDINGS: Pos
Page 197 and 198: STAIN PINT STAIN QUART STAIN GLAZED
Page 199 and 200: Decorative Hardware • For McKinle
Page 201 and 202: Barrel Large Barrel Pull Venetian B
Page 203 and 204:
Fluted, Roundel & Four-Square Flute
Page 205 and 206:
DECORATIVE HARDWARE: Notes Shenando
Page 207 and 208:
DOOR NOMENCLATURE LEGEND Square (DR
Page 209 and 210:
ALUMINUM FRAME (AF1-) MULLION FRAME
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
PARTS DIRECTORy: Notes 219 PARTS: W
Page 221 and 222:
18” WIDE 28, 33, 36, 37, 39, 41,
Page 223 and 224:
SKU STANDARD BASE Qty Part Name Dim
Page 225 and 226:
SKU Qty Part Name Dimensions Dimens
Page 227 and 228:
SKU Qty Part Name Dimensions BASE W
Page 229 and 230:
SKU Qty Part Name Dimensions STANDA
Page 231 and 232:
Page 233 and 234:
SKU Qty Part Name Dimensions Dimens
Page 235 and 236:
Page 237 and 238:
SKU BLIND CORNER Qty Part Name Dime
Page 239 and 240:
DRAWER FRONT DRAWER BODy Full Overl
Page 241 and 242:
Page 243 and 244:
SKU CORNER BASE Qty Part Name Dimen
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
SKU Qty Part Name Dimensions DOUBLE
Page 253 and 254:
Page 255 and 256:
Full Overlay 28, 33, 36, 37, 39, 41
Page 257 and 258:
Full Overlay 28, 33, 36, 37, 39, 41
Page 259 and 260:
Full Overlay 28, 33, 36, 37, 39, 41
Page 261 and 262:
Full Overlay 28, 33, 36, 37, 39, 41
Page 263 and 264:
SKU Qty Part Name Dimensions VANITY
Page 265 and 266:
Page 267 and 268:
Part Name Description HINGES HINGE
Page 269 and 270:
Index 269 INDEX
Page 271 and 272:
INDEX: B-C SKU Spec B Base Recyclin
Page 273 and 274:
INDEX: E-I SKU Spec E Egg and Dart
Page 275 and 276:
INDEX: P-S SKU Spec P Plate Rail Mo
Page 277 and 278:
INDEX: T-W SKU Spec T Triple Bead M
Page 279:
Printed in U.s.a. ©2012 american W
show all

full specification guide - Shenandoah Cabinetry

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?