Edwards Waterer Manual - Edwards Livestock Waterers

Recommendations

Info

5. MAINTENANCE EDWARDS GROUP - LIVESTOCK WATERER 5.4. FLOATING LID KIT INSTALLATION (OPTIONAL) ALL MODELS Figure 5.2 Floating Lid Installation 20 WNA-1414 R1
EDWARDS GROUP - LIVESTOCK WATERER 6. TROUBLESHOOTING ALL MODELS 6.1. HEAT PROBLEMS 6. Troubleshooting 6.1. HEAT PROBLEMS CAUTION Power must be turned off at breaker box before waterer is serviced. WATER FREEZES IN PAN Cause Solution Thermostat malfunction. • Ensure there is power to thermostat, or if necessary, replace thermostat. Thermostat may not positioned prop- • Ensure heat-sensitive side of thermostat is completely erly against pan surface. flush with the pan. Faulty heating element/pad. • Ensure element/pad is functioning. Check for power coming into the element/pad. • Ensure inspection door is properly insulated and posi- Too much heat loss from inside tioned and the pan is properly seated. Make sure the waterer box. WATER OVER-HEATING IN PAN base of the waterer box is sealed with weather-stripping or caulking. Cause Solution Thermostat is unable to sense water/ pan temperature. • Ensure thermostat is flush with bottom of pan surface. Thermostat is touching the pan, but it is still overheating. • Replace thermostat. WNA-1414 R1 21
Page 1 and 2: NRTL/C Read this manual before usin
Page 3 and 4: EDWARDS GROUP - LIVESTOCK WATERER A
Page 5 and 6: EDWARDS GROUP - LIVESTOCK WATERER 1
Page 19: EDWARDS GROUP - LIVESTOCK WATERER 5
Page 27 and 28: WARRANTY Except as expressly provid

Edwards Waterer Manual - Edwards Livestock Waterers

Create successful ePaper yourself

Delete template?

Save as template?