SMART Board User's Guide - Psychology

More documents

Recommendations

Info

At SMART, we’re always working to improve your experience by offering free software upgrades. In the past, we’ve made new features such as handwriting recognition, SMART Recorder and SMART Video Player available to all customers, new and old alike. Register your TM SMART Board interactive whiteboard to be notified of free upgrades like these in the future. We also want to give you the best technical support possible. Please help us by registering your SMART Board interactive whiteboard and keeping the following information available in case you need to contact SMART Technical Support: Serial Number: Date of Purchase: Registration Benefits Register online at: www.smarttech.com/registration FCC Warning This equipment has been tested and found to comply with the limits for a “Class B” digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (this can be determined by turning the equipment off and on) the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications to this “Class B” digital device that have not been expressly approved by SMART Technologies Inc. could void the user's authority to operate the equipment. Trademark Notice SMART Board, Rear Projection SMART Board, SMART Board for Plasma Displays, In-Wall Rear Projection SMART Board and Notebook are trademarks of SMART Technologies Inc. Microsoft, NetMeeting and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Macintosh, Mac OS and QuickTime are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. CalliGrapher is either a registered trademark or a trademark of Microsoft Corporation in the U.S. and other countries. CalliGrapher 6.3 is an independent product not affiliated with Microsoft Corporation. DataBeam and FarSite are registered trademarks of Lotus Development Corporation. Netscape is a registered trademark of Netscape Communications Corporation in the U.S. and other countries. CoolTalk is also a trademark of Netscape Communications Corporation and may be registered outside the U.S. PictureTel is a registered trademark of PictureTel Corporation. LiveShare is a trademark of PictureTel Corporation. Intel and ProShare are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the U.S. and other countries. Corel, CorelDraw and Corel Presentations are trademarks or registered trademarks of Corel Corporation or Corel Corporation Limited in Canada, the U.S. and/or other countries. Autodesk, AutoCAD, AutoCAD LT and Volo are registered trademarks of Autodesk Inc. in the U.S. and/or other countries. AutoVue is a trademark of Cimmetry Systems Inc. All other third-party product and company names are mentioned for identification purposes only and may be trademarks of their respective owners. U.S. Patent No. 5,448,263 and 6,141,000. Canadian Patent No. 2,058,219. Other U.S. and foreign patents pending. Copyright Notice © 1995–2002 SMART Technologies Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior written consent of SMART. Information in this manual is subject to change without notice and does not represent a commitment on the part of SMART. Portions of this software are copyrighted by Intel Corporation. Portions of this software are copyrighted by ParaGraph, a business unit of Vadem. CalliGrapher® Copyright © 1997–2002 ParaGraph, a business unit of Vadem. Printed in Canada 09/2002
Important Information Please read this manual carefully before setting up and using the SMART Board interactive whiteboard. With proper care, your interactive whiteboard should provide years of troublefree service. NOTE: The information provided in this section applies to the SMART Board interactive whiteboard (500 series). If you have a Rear Projection SMART Board unit or a SMART Board for Plasma Displays interactive overlay, refer to the installation manual that came with your model for warnings, precautions and maintenance instructions. Other Precautions WARNING If you use a projector with your SMART Board interactive whiteboard, do not view directly or stare into the beam of light created by the projector. Be especially careful to instruct children not to look in the direction of, or stare at, the beam of light created by the projector. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. For operating safety and to avoid damage to the unit, read carefully and observe the following instructions. 1 If you decide to move a SMART Board interactive whiteboard that has been mounted on a Floor Stand, do so with care. Quick stops, excessive force and uneven surfaces may cause the interactive whiteboard to overturn. 2 If you are transporting the interactive whiteboard over a distance, we strongly urge you to completely repackage it using the original packaging. If the original packaging is no longer available, pack all components with as much padding as reasonably possible to ensure that they are not exposed to excessive vibration or shock. 3 Avoid setting up and using the interactive whiteboard in an area with excessive levels of dust, humidity and cigarette smoke. 4 Avoid leaving cables on the floor where they can be tripped over. If you must run a cable over the floor, lay the cable in a flat, straight line and secure it to the floor with tape or a cable management strip in a contrasting color. Handle cables carefully and avoid excessive bending. 5 If replacement parts are required, ensure the service technician has used replacement parts specified by SMART Technologies Inc. or parts with the same characteristics as the original. Preface i
Page 1: User’s Guide ® ® for Microsoft
Page 5 and 6: Getting Started Getting your SMART
Page 7 and 8: 5 Turn on your computer. The Ready
Page 9 and 10: The Ready Light on the SMART Pen Tr
Page 11 and 12: 3 With your Macintosh computer turn
Page 13 and 14: About This Guide As you read throug
Page 15 and 16: Contents Important Information ....
Page 17 and 18: Touch Shortcuts for PowerPoint Soft
Page 19 and 20: SMART Board Software SMART Board So
Page 21 and 22: Before a meeting or presentation, y
Page 23 and 24: SMART Board Control Panel The SMART
Page 25 and 26: Using Microsoft Word and Excel on a
Page 27 and 28: Using an Interactive Whiteboard wit
Page 29 and 30: Adjusting the Projected Image You m
Page 31 and 32: If Your Laptop’s Serial Port is U
Page 33 and 34: The Display Controller Wizard will
Page 35 and 36: Writing, Capturing and Erasing You
Page 37 and 38: To change the stylus settings: To c
Page 39 and 40: Two Buttons to Note: The Restore/Cl
Page 41 and 42: Saving Pen Tray and Floating Tools
Page 43 and 44: If you’d prefer to remove all ann
Page 45 and 46: Press here for Smooth Ink 4 Press O
Page 47 and 48: Using the SMART Keyboard to Type Te
Page 49 and 50: 5 Press the Commit button to transf
Page 51 and 52: To convert handwriting to all upper
Page 53 and 54:
Using SMART Recorder If you’re a
Page 55 and 56:
3 To change sound and video quality
Page 57 and 58:
8 When the progress bar reaches 100
Page 59 and 60:
Using SMART Video Player SMART Vide
Page 61 and 62:
Using the Output from Video Hardwar
Page 63 and 64:
NOTE: If you create a large number
Page 65 and 66:
Writing with the Pen Tool To write
Page 67 and 68:
Assigning or Changing Text Attribut
Page 69 and 70:
A selection rectangle will emerge f
Page 71 and 72:
Rearranging Stacked Objects When yo
Page 73 and 74:
3 Tap once inside that circle to er
Page 75 and 76:
To create a new Notebook file: 1 Se
Page 77 and 78:
2 Select Save As Template File from
Page 79 and 80:
The Print dialog box appears. 2 Acc
Page 81 and 82:
The Templates dialog box will open,
Page 83 and 84:
NOTE: If the Floating Tools are act
Page 85 and 86:
Importing Scanned Pictures If you h
Page 87 and 88:
To capture a selected area or the e
Page 89 and 90:
Sorting Information in Notebook Sof
Page 91 and 92:
Unlike the Page Sorter, you can’t
Page 93 and 94:
To activate the Full Screen view on
Page 95 and 96:
Working with Board-Aware Third-Part
Page 97 and 98:
• If the Floating Tools are open,
Page 99 and 100:
4 Scroll to the application and dou
Page 101 and 102:
• To use a floating mouse, touch
Page 103 and 104:
Customer Support SMART’s Technica
Page 105 and 106:
The SMART Board driver is now ready
Page 107 and 108:
Tool Button Resulting Interactive W
Page 109 and 110:
Or, perhaps you’re presenting com
Page 111 and 112:
Downloading the Microsoft Web Publi
Page 113 and 114:
Reducing Screen Resolution and Disp
Page 115:
Suite 600, 1177 - 11th Avenue SW, C
show all

SMART Board User's Guide - Psychology

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?