SMART Board User's Guide - Psychology

More documents

Recommendations

Info

Mac Macintosh Serial Cable Setup 1 Connect the short DB9 end of the supplied serial cable to the 9-pin serial port underneath the interactive whiteboard. 9-pin Serial Port (Underneath Board) Short DB9 Connector 2 Attach the supplied Macintosh serial adapter to the long DB9 end of the supplied serial cable and insert the barrel-shaped end of the adapter into the modem or printer port on your Macintosh computer. Supplied Serial Cable Modem or Printer Port viii Preface Power Plug Socket Long DB9 Connecter Macintosh Serial Adapter
3 With your Macintosh computer turned off, unplug your keyboard connector from the keyboard port. Next, connect the power plug end of the supplied SMART Keyboard Adapter to the power plug on the long DB9 connector and the other end to the vacated keyboard port. Finally, reconnect the keyboard connector to the SMART Keyboard Adapter. SMART Keyboard Adapter NOTE: If your Macintosh computer isn’t equipped with a keyboard port, connect an external power supply to the power plug socket on the long DB9 connector. This external power supply must have the following characteristics: • 2.1 mm inner diameter — positive center post • 5.5 mm outer diameter — negative outer barrel • 6V DC to 12V DC output Long DB9 Connector Power Plug Socket • minimum 200 mA output 4 Turn on your Macintosh computer. NOTE: The Ready Light on the Pen Tray will turn red when you turn on your Macintosh computer. This indicates it’s receiving power from your keyboard port or external power supply. Ready Light To Serial Adapter To Keyboard Port 5 Insert the SMART Board software CD into your CD-ROM drive. The CD will automatically launch the installation program. Follow the on-screen instructions. Immediately following SMART Board software installation, you’ll notice the Ready Light on the Pen Tray turns from red to green. This indicates that the interactive whiteboard is now fully touch sensitive. To Keyboard Connector Preface ix
Page 1 and 2: User’s Guide ® ® for Microsoft
Page 3 and 4: Important Information Please read t
Page 5 and 6: Getting Started Getting your SMART
Page 7 and 8: 5 Turn on your computer. The Ready
Page 9: The Ready Light on the SMART Pen Tr
Page 13 and 14: About This Guide As you read throug
Page 15 and 16: Contents Important Information ....
Page 17 and 18: Touch Shortcuts for PowerPoint Soft
Page 19 and 20: SMART Board Software SMART Board So
Page 21 and 22: Before a meeting or presentation, y
Page 23 and 24: SMART Board Control Panel The SMART
Page 25 and 26: Using Microsoft Word and Excel on a
Page 27 and 28: Using an Interactive Whiteboard wit
Page 29 and 30: Adjusting the Projected Image You m
Page 31 and 32: If Your Laptop’s Serial Port is U
Page 33 and 34: The Display Controller Wizard will
Page 35 and 36: Writing, Capturing and Erasing You
Page 37 and 38: To change the stylus settings: To c
Page 39 and 40: Two Buttons to Note: The Restore/Cl
Page 41 and 42: Saving Pen Tray and Floating Tools
Page 43 and 44: If you’d prefer to remove all ann
Page 45 and 46: Press here for Smooth Ink 4 Press O
Page 47 and 48: Using the SMART Keyboard to Type Te
Page 49 and 50: 5 Press the Commit button to transf
Page 51 and 52: To convert handwriting to all upper
Page 53 and 54: Using SMART Recorder If you’re a
Page 55 and 56: 3 To change sound and video quality
Page 57 and 58: 8 When the progress bar reaches 100
Page 59 and 60: Using SMART Video Player SMART Vide
Page 61 and 62:
Using the Output from Video Hardwar
Page 63 and 64:
NOTE: If you create a large number
Page 65 and 66:
Writing with the Pen Tool To write
Page 67 and 68:
Assigning or Changing Text Attribut
Page 69 and 70:
A selection rectangle will emerge f
Page 71 and 72:
Rearranging Stacked Objects When yo
Page 73 and 74:
3 Tap once inside that circle to er
Page 75 and 76:
To create a new Notebook file: 1 Se
Page 77 and 78:
2 Select Save As Template File from
Page 79 and 80:
The Print dialog box appears. 2 Acc
Page 81 and 82:
The Templates dialog box will open,
Page 83 and 84:
NOTE: If the Floating Tools are act
Page 85 and 86:
Importing Scanned Pictures If you h
Page 87 and 88:
To capture a selected area or the e
Page 89 and 90:
Sorting Information in Notebook Sof
Page 91 and 92:
Unlike the Page Sorter, you can’t
Page 93 and 94:
To activate the Full Screen view on
Page 95 and 96:
Working with Board-Aware Third-Part
Page 97 and 98:
• If the Floating Tools are open,
Page 99 and 100:
4 Scroll to the application and dou
Page 101 and 102:
• To use a floating mouse, touch
Page 103 and 104:
Customer Support SMART’s Technica
Page 105 and 106:
The SMART Board driver is now ready
Page 107 and 108:
Tool Button Resulting Interactive W
Page 109 and 110:
Or, perhaps you’re presenting com
Page 111 and 112:
Downloading the Microsoft Web Publi
Page 113 and 114:
Reducing Screen Resolution and Disp
Page 115:
Suite 600, 1177 - 11th Avenue SW, C
show all

SMART Board User's Guide - Psychology

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?