Scana Skarpenord AS Complete set of datasheets - Net
Scana Skarpenord AS Complete set of datasheets - Net
Scana Skarpenord AS Complete set of datasheets - Net
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Control Circuit d36<br />
Indirect Volumetric indication<br />
CONTROL CIRCUIT D36<br />
INDIRECT VOLUMETRIC INDICATION<br />
Temperature and pressure independent<br />
P<br />
T<br />
T<br />
A B<br />
T0<br />
CL OP<br />
TEMPERATURE AND PRESSURE INDEPENDENT<br />
P<br />
T<br />
PRESSURE LINE lINE<br />
RETURN LINElINE<br />
ISOlATEd ISOLATED VOLUME VOlUmE<br />
ElECTRIC ELECTRIC SIGNAL SIgNAl<br />
ClOSINg CLOSING<br />
LOCKED lOCkEd OPENING OPENINg<br />
Throttle control, fail to <strong>set</strong>. Indirect indication. Pressure and temperature independent.<br />
Control via spring loaded directional valve, 6/3 type, activated by two solenoids operated by electric signals.<br />
Upon release <strong>of</strong> electric signal to the solenoid, the pressure in the lines from the actuators is drained to tank.<br />
T P<br />
A hydrolock with built in relief valves is mounted on the actuator, and maintains the position <strong>of</strong> the valve when the control<br />
lines are drained. The relief valve prevents accumulation <strong>of</strong> high pressure in the actuator lines due to temperature<br />
changes.<br />
Continuous indication <strong>of</strong> the valve position is achieved by a potentiometer connected to a piston type volumetric indicator<br />
mounted in the solenoid valve cabinet. The volumetric indicator has a visual indicator in front for local indication <strong>of</strong> the<br />
valve position.<br />
The volumetric indicator is connected to the return line from actuator, and not exposed to variations in pressure. When<br />
the circuit is not activated, the indicator is isolated from the lines, and not influenced by volume variations due to pressure<br />
changes. If the volumetric indicator for some reason is not synchronised with the actuator, the indicator will automatically<br />
be synchronised with the actuator each time the valve is operated from one end position to the other.<br />
<strong>Scana</strong> <strong>Skarpenord</strong> <strong>AS</strong> • Såheimsveien 2, P.O. Box 3 • N-3661 Rjukan, Norway<br />
Tel: +47 35 09 32 00 • Fax: +47 35 09 18 01 E-mail: ssr@scana.no • www.scana.no<br />
A<br />
B<br />
T0<br />
CL OP<br />
P<br />
T<br />
T<br />
A B<br />
T0<br />
CL OP