SPSS® 12.0 Command Syntax Reference

More documents

Recommendations

Info

1196 PARTIAL CORR MATRIX Subcommand MATRIX reads and writes matrix data files. • Either IN or OUT and a matrix file in parentheses is required. When both IN and OUT are used on the same PARTIAL CORR procedure, they can be specified on separate MATRIX subcommands or both on the same subcommand. OUT (filename) Write the (highest-order) correlation matrix to a file. Specify either a filename or an asterisk, enclosed in parentheses. If you specify a filename, the file is stored on disk and can be retrieved at any time. If you specify an asterisk (*), the matrix data file replaces the working data file but is not stored on disk unless you use SAVE or XSAVE. IN (filename) Read a matrix data file. If the matrix data file is the working data file, specify an asterisk (*) in parentheses. If the matrix data file is another file, specify a filename in parentheses. Both the working data file and the matrix data file must contain all the variables specified on the VARIABLES subcommands on PARTIAL CORR. A matrix file read from an external file does not replace the working data file. Matrix Output • The matrix materials that PARTIAL CORR writes can be used by subsequent PARTIAL CORR procedures or by other procedures that read correlation-type matrices. • In addition to the partial correlation coefficients, the matrix materials PARTIAL CORR writes include the mean, standard deviation, and number of cases used to compute each coefficient (see “Format of the Matrix Data File” on p. 1197 for a description of the file). If PARTIAL CORR reads matrix data and then writes matrix materials based on those data, the matrix data file that it writes will not include means and standard deviations. • PARTIAL CORR writes a full square matrix for the analysis specified on the first VARIABLES subcommand (or the first analysis list if keyword VARIABLES is omitted). No matrix is written for subsequent variable lists. • Any documents contained in the working data file are not transferred to the matrix file. Matrix Input • When matrix materials are read from a file other than the working data file, both the working data file and the matrix data file specified on IN must contain all the variables specified on the VARIABLES subcommands. • MATRIX=IN cannot be specified unless a working data file has already been defined. To read an existing matrix data file at the beginning of a session, use GET to retrieve the matrix file and then specify IN(*) on MATRIX. • PARTIAL CORR can read correlation-type matrices written by other procedures. • The program reads variable names, variable and value labels, and print and write formats from the dictionary of the matrix data file.
Format of the Matrix Data File Split Files PARTIAL CORR 1197 • The matrix data file includes two special variables created by the program: ROWTYPE_ and VARNAME_. • ROWTYPE_ is a short string variable with values N, MEAN, STDDEV, and PCORR (for the partial correlation coefficient). • VARNAME_ is a short string variable whose values are the names of the variables used to form the correlation matrix. When ROWTYPE_ is PCORR, VARNAME_ gives the variable associated with that row of the correlation matrix. • The remaining variables in the file are the variables used to form the correlation matrix. • When split-file processing is in effect, the first variables in the matrix data file are the split variables, followed by ROWTYPE_, VARNAME_, and the variables used to form the correlation matrix. • A full set of matrix materials is written for each split-file group defined by the split variables. • A split variable cannot have the same variable name as any other variable written to the matrix data file. • If split-file processing is in effect when a matrix is written, the same split file must be in effect when that matrix is read by any procedure. Missing Values Example • With pairwise treatment of missing values (MISSING=ANALYSIS is specified), the matrix of N’s used to compute each coefficient is included with the matrix materials. • With LISTWISE treatment, a single N used to calculate all coefficients is included with the matrix materials. • When reading a matrix data file, be sure to specify a missing-value treatment on PARTIAL CORR that is compatible with the missing-value treatment that was in effect when the matrix materials were produced. GET FILE=CITY. PARTIAL CORR VARIABLES=BUSDRVER MECHANIC ENGINEER TEACHER COOK BY NETSALRY(1) /MATRIX=OUT(PTMTX). • PARTIAL CORR reads data from file CITY and writes one set of matrix materials to file PTMTX. • The working data file is still CITY. Subsequent commands are executed on CITY.
Page 1 and 2:
SPSS® 12.0 Command Syntax Referenc
Page 3 and 4:
Universals This part of the SPSS Sy
Page 5 and 6:
Commands 5 before processing. All u
Page 7 and 8:
Commands 7 • Subcommands begin wi
Page 9 and 10:
Commands 9 • Transformation comma
Page 11 and 12:
Files SPSS reads, creates, and writ
Page 13 and 14:
SPSS-Format Data File Files 13 An S
Page 15 and 16:
SPSS Matrix Data Files Files 15 An
Page 17 and 18:
Files 17 4. VARNAME_ variable (or F
Page 19 and 20:
Figure 6 Dictionary of a matrix sys
Page 21 and 22:
Variables To prepare data for proce
Page 23 and 24:
Keyword TO Variables 23 You can est
Page 25 and 26:
Variable Formats Variables 25 SPSS
Page 27 and 28:
Format type Description Ew.d Scient
Page 29 and 30:
Table 4 Numeric formats with punctu
Page 31 and 32:
Variables 31 PIBHEXw (hexadecimal o
Page 33 and 34:
Variables 33 RBw (real binary): The
Page 35 and 36:
Variables 35 is read as two separat
Page 37 and 38:
Transformation Expressions Transfor
Page 39 and 40:
SQRT(arg) Square root. SQRT(SIBS) i
Page 41 and 42:
The following are suffixes for cont
Page 43 and 44:
Transformation Expressions 43 0≤p
Page 45 and 46:
Domain Errors Transformation Expres
Page 47 and 48:
Transformation Expressions 47 origi
Page 49 and 50:
Transformation Expressions 49 • L
Page 51 and 52:
NOT Logical Operator Transformation
Page 53 and 54:
and COMPUTE lagvar=LAG(var1). EXECU
Page 55 and 56:
Date and Time SPSS reads and writes
Page 57 and 58:
Input Data Specification Date and T
Page 59 and 60:
The LIST output from these commands
Page 61 and 62:
Date and Time 61 • A time interva
Page 63 and 64:
Aggregation Functions Date and Time
Page 65 and 66:
Conversion Functions Date and Time
Page 67 and 68:
Date and Time 67 XDATE.HOUR(arg) Re
Page 69:
Precautions with Date and Time Vari
Page 72 and 73:
72 ACF and DIFF subcommands. With s
Page 74 and 75:
74 ACF SDIFF Subcommand If the seri
Page 76 and 77:
76 ACF SERROR Subcommand SERROR spe
Page 78 and 79:
ADD DOCUMENT ADD DOCUMENT ’text
Page 80 and 81:
ADD FILES ADD FILES FILE={file} {*
Page 82 and 83:
82 ADD FILES • The resulting file
Page 84 and 85:
84 ADD FILES • Input data files a
Page 86 and 87:
86 ADD FILES FIRST and LAST Subcomm
Page 88 and 89:
88 ADD VALUE LABELS • The added v
Page 90 and 91:
AGGREGATE AGGREGATE OUTFILE={file}
Page 92 and 93:
92 AGGREGATE Example Example • If
Page 94 and 95:
94 AGGREGATE Example AGGREGATE OUTF
Page 96 and 97:
96 AGGREGATE FIN(varlist,value1,val
Page 98 and 99:
98 AGGREGATE • User-missing value
Page 100 and 101:
ALSCAL ALSCAL VARIABLES=varlist [/F
Page 102 and 103:
102 ALSCAL Operations • ALSCAL ca
Page 104 and 105:
104 ALSCAL ASYMMETRIC Asymmetric da
Page 106 and 107:
106 ALSCAL • INITIAL is the defau
Page 108 and 109:
108 ALSCAL differences model propos
Page 110 and 111:
110 ALSCAL • Algorithmic options
Page 112 and 113:
112 ALSCAL Table 2 Types of configu
Page 114 and 115:
Matrix mode Object by object 114 AL
Page 116 and 117:
Matrix mode Object by object Object
Page 118 and 119:
118 Syntax Reference Basic Specific
Page 120 and 121:
120 Syntax Reference Example DATA L
Page 122 and 123:
122 Syntax Reference PLOT Subcomman
Page 124 and 125:
124 Syntax Reference VARNAME_ Strin
Page 127 and 128:
ANOVA ANOVA [VARIABLES=] varlist BY
Page 129 and 130:
Example Example ANOVA 129 ANOVA VAR
Page 131 and 132:
ANOVA 131 Some restrictions apply t
Page 133 and 134:
Table 2 Combinations of COVARIATES
Page 135 and 136:
Multiple Classification Analysis AN
Page 137 and 138:
APPLY DICTIONARY 137 • The applie
Page 139 and 140:
APPLY DICTIONARY 139 target file as
Page 141 and 142:
APPLY DICTIONARY 141 MRSETS = MERGE
Page 143 and 144:
APPLY DICTIONARY 143
Page 145 and 146:
Options Basic Specification Subcomm
Page 147 and 148:
• Only one method can be specifie
Page 149 and 150:
APPLY Subcommand AREG 149 • Itera
Page 151 and 152:
AREG 151
Page 153 and 154:
Options Basic Specification ARIMA 1
Page 155 and 156:
Limitations Example ARIMA 155 • F
Page 157 and 158:
D Order of differencing. Q Moving-a
Page 159 and 160:
Termination Criteria Subcommands CI
Page 161 and 162:
References ARIMA 161 Akaike, H. 197
Page 163 and 164:
Subcommand Order • VARIABLES must
Page 165 and 166:
Example AUTORECODE 165 DATA LIST /
Page 167 and 168:
BEGIN DATA—END DATA BEGIN DATA da
Page 169 and 170:
BREAK BREAK Overview BREAK controls
Page 171 and 172:
CASEPLOT Overview CASEPLOT [VARIABL
Page 173 and 174:
Subcommand Order • Subcommands ca
Page 175 and 176:
LN and NOLOG Subcommands CASEPLOT 1
Page 177 and 178:
CASEPLOT 177 erence line. Figure 3
Page 179 and 180:
CASEPLOT 179 • If FORMAT=REFERENC
Page 181 and 182:
Options CASESTOVARS 181 Automatic c
Page 183 and 184:
The commands: CASESTOVARS 183 SPLIT
Page 185 and 186:
create a new file with the followin
Page 187 and 188:
SEPARATOR Subcommand CASESTOVARS 18
Page 189 and 190:
CATPCA CATPCA is available in the C
Page 191 and 192:
Optional output. You can request op
Page 193 and 194:
CATPCA 193 • The NORMALIZATION su
Page 195 and 196:
SPORD and SPNOM Keywords The follow
Page 197 and 198:
ACTIVE Keyword The ACTIVE keyword h
Page 199 and 200:
MAXITER Subcommand CATPCA 199 MAXIT
Page 201 and 202:
CATPCA 201 The keyword TO in a vari
Page 203 and 204:
TRIPLOT(varlist(varlist))(n) CATPCA
Page 205 and 206:
CATPCA 205 procedures with the succ
Page 207 and 208:
CATREG Overview CATREG is available
Page 209 and 210:
Operations Limitations CATREG 209
Page 211 and 212:
ANALYSIS Subcommand LEVEL Keyword C
Page 213 and 214:
GROUPING Keyword DISTR Keyword MISS
Page 215 and 216:
PRINT Subcommand CATREG 215 The PRI
Page 217 and 218:
SAVE Subcommand OUTFILE Subcommand
Page 219 and 220:
CCF Overview Options CCF [VARIABLES
Page 221 and 222:
CCF 221 • LN transforms the data
Page 223 and 224:
CCF 223 • If a natural log transf
Page 225 and 226:
CLEAR TRANSFORMATIONS Overview CLEA
Page 227 and 228:
Example Overview Options CLUSTER V1
Page 229 and 230:
CLUSTER 229 • The variable list i
Page 231 and 232:
Measures for Binary Data CLUSTER 23
Page 233 and 234:
DICE[(p[,np])] Dice (or Czekanowski
Page 235 and 236:
Y( x, y) ad - bc = ----------------
Page 237 and 238:
CLUSTER 237 MEDIAN Median clusterin
Page 239 and 240:
CLUSTER 239 • This example displa
Page 241 and 242:
Matrix Input CLUSTER 241 • The ma
Page 243 and 244:
Example Example Example DATA LIST F
Page 245 and 246:
COMMENT {COMMENT} text { * } Overvi
Page 247 and 248:
Cumulative distribution functions (
Page 249 and 250:
Cumulative distribution functions (
Page 251 and 252:
Logical functions: RANGE(varname,ra
Page 253 and 254:
String Transformations COMPUTE 253
Page 255 and 256:
Examples COMPUTE 255 • The string
Page 257 and 258:
COMPUTE 257 • Alternatively, you
Page 259 and 260:
Equivalence COMPUTE 259 STRING DEPT
Page 261 and 262:
CONJOINT Overview CONJOINT is avail
Page 263 and 264:
CONJOINT 263 the experimental profi
Page 265 and 266:
CONJOINT 265 • The ADD FILES comm
Page 267 and 268:
CONJOINT 267 subject is asked to as
Page 269 and 270:
CONJOINT 269 • New value labels a
Page 271 and 272:
PLOT Subcommand CONJOINT 271 The PL
Page 273 and 274:
Basic Specification CORRELATIONS 27
Page 275 and 276:
MISSING Subcommand CORRELATIONS 275
Page 277 and 278:
Example CORRELATIONS 277 • CORREL
Page 279 and 280:
CORRESPONDENCE CORRESPONDENCE is av
Page 281 and 282:
Syntax Rules Operations Limitations
Page 283 and 284:
DIMENSION Subcommand CORRESPONDENCE
Page 285 and 286:
CORRESPONDENCE 285 EUCLID Euclidean
Page 287 and 288:
PLOT Subcommand NONE No output othe
Page 289 and 290:
CORRESPONDENCE 289 DIM1...DIMn Nume
Page 291 and 292:
COUNT COUNT varname=varlist(value l
Page 293 and 294:
COXREG COXREG is available in the A
Page 295 and 296:
Basic Specification COXREG 295 •
Page 297 and 298:
VARIABLES Subcommand COXREG 297 VAR
Page 299 and 300:
COXREG 299 • If the categorical v
Page 301 and 302:
COXREG 301 BSTEP Backward stepwise.
Page 303 and 304:
CRITERIA Subcommand COXREG 303 CRIT
Page 305 and 306:
COXREG 305 TABLE Write the survival
Page 307 and 308:
CREATE CREATE new series={CSUM (ser
Page 309 and 310:
Example CREATE NEWVAR1 = DIFF(OLDVA
Page 311 and 312:
LAG Function CREATE 311 LAG creates
Page 313 and 314:
Example CREATE TICKMA = MA(TICKETS,
Page 315 and 316:
T4253H Function CREATE 315 T4253H p
Page 317 and 318:
Overview Options CROSSTABS 317 CROS
Page 319 and 320:
Example CROSSTABS 319 • The varia
Page 321 and 322:
CROSSTABS 321 • VARIABLES names t
Page 323 and 324:
CROSSTABS 323 CORR Display Pearson
Page 325 and 326:
FORMAT Subcommand CROSSTABS 325 By
Page 327 and 328:
CROSSTABS 327 • The split-file gr
Page 329 and 330:
CROSSTABS 329
Page 331 and 332:
Operations CSDESCRIPTIVES 331 • C
Page 333 and 334:
CSDESCRIPTIVES 333 • Plan file an
Page 335 and 336:
CSDESCRIPTIVES 335 • The set of s
Page 337 and 338:
CSDESCRIPTIVES 337
Page 339 and 340:
CSSELECT 339 inclusion probabilitie
Page 341 and 342:
PLAN Subcommand CSSELECT 341 The PL
Page 343 and 344:
Example CSPLAN /PLAN OUTFILE=’c:\
Page 345 and 346:
CSSELECT 345
Page 347 and 348:
Design Block: Stages 2 and 3 CSPLAN
Page 349 and 350:
Example Overview Options CSPLAN SAM
Page 351 and 352:
CSPLAN 351 • A PLAN subcommand is
Page 353 and 354:
Stratified sample design CSPLAN SAM
Page 355 and 356:
CSPLAN 355 • The variable samplew
Page 357 and 358:
CSPLAN 357 Typically the previous w
Page 359 and 360:
CSPL AN 359 • CLUSTER is required
Page 361 and 362:
SIZE Subcommand CSPLAN 361 The SIZE
Page 363 and 364:
MINSIZE Keyword CSPLAN 363 MINSIZE
Page 365 and 366:
Keyword Default Root Name Descripti
Page 367 and 368:
CSPLAN 367 strata only the last one
Page 369 and 370:
CSPLAN 369
Page 371 and 372:
CSTABULATE 371 • This specificati
Page 373 and 374:
CSTABULATE 373 on the left defines
Page 375 and 376:
CSTABULATE 375 • For example, /SU
Page 377 and 378:
ADJUST= {BONFERRONI} ORIGIN=COLUMN
Page 379 and 380:
Example Think of self as liberal or
Page 381 and 382:
Example CTABLES /TABLE HAPPY. Gener
Page 383 and 384:
Scale Variables CTABLES 383 Scale v
Page 385 and 386:
CTABLES 385 • Each summary functi
Page 387 and 388:
Table 2 Summary functions: scale va
Page 389 and 390:
Table 3 Summary functions: multiple
Page 391 and 392:
Missing Values in Summaries CTABLES
Page 393 and 394:
Example CTABLES 393 CTABLES /TABLE
Page 395 and 396:
CTABLES 395 • The SUBTOTAL keywor
Page 397 and 398:
Totals Example CTABLES /TABLE AGE [
Page 399 and 400:
CTABLES 399 CORNER Corner text. Cor
Page 401 and 402:
Pairwise Comparisons of Proportions
Page 403 and 404:
CTABLES 403 EMPTY Fill characters u
Page 405 and 406:
CURVEFIT CURVEFIT [VARIABLES=] varn
Page 407 and 408:
Operations CURVEFIT 407 • When CU
Page 409 and 410:
CURVEFIT 409 • This command fits
Page 411 and 412:
APPLY Subcommand CURVEFIT 411 APPLY
Page 413 and 414:
Example Overview Options Week and y
Page 415 and 416:
Fixed-Format Data DATA LIST 415 •
Page 417 and 418:
DATA LIST 417 LIST Freefield data w
Page 419 and 420:
DATA LIST 419 • RECORDS can be us
Page 421 and 422:
Example DATA LIST 421 INPUT PROGRAM
Page 423 and 424:
Variable Names DATA LIST 423 • Va
Page 425 and 426:
Example * Mixing column-style and F
Page 427 and 428:
DATA LIST 427 • For freefield dat
Page 429 and 430:
DATA LIST 429 • The width (w) por
Page 431 and 432:
DATE DATE keyword [starting value [
Page 433 and 434:
DATE 433 • The starting value is
Page 435 and 436:
DATE 435 • For DAY_, the starting
Page 437 and 438:
Example 5 DATE Y 1950 Q 2 M. DATE 4
Page 439 and 440:
The following is a partial listing
Page 441 and 442:
Example DEFINE sesvars () age sex e
Page 443 and 444:
Example Example * Macro without arg
Page 445 and 446:
DEFINE—!ENDDEFINE 445 • The mac
Page 447 and 448:
DEFINE—!ENDDEFINE 447 • This ex
Page 449 and 450:
Example * Keyword !CHAREND. DEFINE
Page 451 and 452:
DEFINE—!ENDDEFINE 451 !DEFAULT De
Page 453 and 454:
DEFINE—!ENDDEFINE 453 !HEAD (str)
Page 455 and 456:
Conditional Processing DEFINE—!EN
Page 457 and 458:
DEFINE—!ENDDEFINE 457 • The fir
Page 459 and 460:
DEFINE—!ENDDEFINE 459
Page 461 and 462:
DESCRIPTIVES Overview Options DESCR
Page 463 and 464:
Z Scores DESCRIPTIVES 463 The z-sco
Page 465 and 466:
MAX Maximum observed value. SUM Sum
Page 467 and 468:
DISCRIMINANT DISCRIMINANT GROUPS=va
Page 469 and 470:
Basic Specification DISCRIMINANT 46
Page 471 and 472:
DISCRIMINANT 471 • Variables shou
Page 473 and 474:
Example DISCRIMINANT 473 DISCRIMINA
Page 475 and 476:
DISCRIMINANT 475 • You can set FI
Page 477 and 478:
SAVE Subcommand DISCRIMINANT 477 SA
Page 479 and 480:
STATISTICS Subcommand DISCRIMINANT
Page 481 and 482:
• The default keywords for CLASSI
Page 483 and 484:
Matrix Input DISCRIMINANT 483 recor
Page 485 and 486:
Example Example Example * Use matri
Page 487 and 488:
DISPLAY DISPLAY [SORTED] [{NAMES**
Page 489 and 490:
DISPLAY 489 • If the keyword SORT
Page 491 and 492:
Example Example DOCUMENT 491 • If
Page 493 and 494:
Overview DO IF 493 The DO IF—END
Page 495 and 496:
Flow of Control DO IF 495 • If th
Page 497 and 498:
Example DO IF 497 DO IF (YRHIRED GT
Page 499 and 500:
Nested DO IF Structures DO IF 499 T
Page 501 and 502:
DO REPEAT—END REPEAT DO REPEAT st
Page 503 and 504:
Example DO REPEAT—END REPEAT 503
Page 505 and 506:
Figure 2 Output from the PRINT subc
Page 507 and 508:
ECHO ECHO "text". Example Overview
Page 509 and 510:
Operations Example END CASE 509 •
Page 511 and 512:
END CASE 511 • Data are extracted
Page 513 and 514:
END CASE 513 BEGIN DATA 1 AC 91 2 C
Page 515 and 516:
END CASE 515 • The frequencies ta
Page 517 and 518:
Example Example *Select cases. INPU
Page 519 and 520:
EXAMINE EXAMINE VARIABLES=varlist [
Page 521 and 522:
Example EXAMINE VARIABLES=MIPERGAL
Page 523 and 524:
• The method keywords follow the
Page 525 and 526:
STATISTICS Subcommand EXAMINE 525 S
Page 527 and 528:
EXAMINE 527 PAIRWISE Delete cases w
Page 529 and 530:
EXPORT EXPORT OUTFILE=file [/TYPE={
Page 531 and 532:
EXPORT 531 • Tape density—200,
Page 533 and 534:
DROP and KEEP Subcommands EXPORT 53
Page 535 and 536:
EXSMOOTH EXSMOOTH is available in t
Page 537 and 538:
Subcommand Order Syntax Rules Opera
Page 539 and 540:
Table 1 Models for different types
Page 541 and 542:
Example EXSMOOTH 541 EXSMOOTH VAR2
Page 543 and 544:
INITIAL Subcommand EXSMOOTH 543 •
Page 545 and 546:
References EXSMOOTH 545 • The fir
Page 547 and 548:
Example Overview Options FACTOR VAR
Page 549 and 550:
Operations Example FACTOR 549 • V
Page 551 and 552:
FACTOR 551 • By default, FACTOR u
Page 553 and 554:
FACTOR 553 DET Determinant of the c
Page 555 and 556:
• The factor pattern matrix is ro
Page 557 and 558:
ROTATION Subcommand FACTOR 557 ROTA
Page 559 and 560:
FACTOR 559 • The ROTATION subcomm
Page 561 and 562:
Example Example Example Example FAC
Page 563 and 564:
FACTOR 563 Jöreskog, K. G. 1977. F
Page 565 and 566:
MULTIPUNCH Column binary file. IMAG
Page 567 and 568:
FILE TYPE—END FILE TYPE For mixed
Page 569 and 570:
Syntax Rules FILE TYPE—END FILE T
Page 571 and 572:
Example * A grouped file of student
Page 573 and 574:
FILE TYPE—END FILE TYPE 573 GROUP
Page 575 and 576:
FILE TYPE—END FILE TYPE 575 • T
Page 577 and 578:
FILE TYPE—END FILE TYPE 577 • T
Page 579 and 580:
FILE TYPE—END FILE TYPE 579 WARN
Page 581 and 582:
FILE TYPE—END FILE TYPE 581 BEGIN
Page 583 and 584:
Example FILTER 583 • Both system-
Page 585 and 586:
Example * A command file. FINISH 58
Page 587 and 588:
Syntax Rules FIT 587 • If OBS is
Page 589 and 590:
FLIP FLIP [[VARIABLES=] {ALL }] {va
Page 591 and 592:
FLIP 591 Example Using the untransp
Page 593 and 594:
FORMATS FORMATS varlist(format) [va
Page 595 and 596:
Table 1 Output data formats (Contin
Page 597 and 598:
FREQUENCIES FREQUENCIES [VARIABLES=
Page 599 and 600:
Example FREQUENCIES 599 • FREQUEN
Page 601 and 602:
FREQUENCIES 601 • MISSING and NOM
Page 603 and 604:
Example FREQUENCIES 603 FREQUENCIES
Page 605 and 606:
Example FREQUENCIES VAR=AGE /STATS=
Page 607 and 608:
Options GENLOG 607 mates for unsatu
Page 609 and 610:
GENLOG 609 • To separate the inde
Page 611 and 612:
GENLOG 611 • For each effect, GEN
Page 613 and 614:
GENLOG 613 DESIGN The design matrix
Page 615 and 616:
GENLOG 615 • The saved variables
Page 617 and 618:
GET GET FILE=file [/KEEP={ALL** }]
Page 619 and 620:
GET 619 • Variables can be specif
Page 621 and 622:
GET CAPTURE GET CAPTURE {ODBC }* [/
Page 623 and 624:
GET CAPTURE 623 • You can display
Page 625 and 626:
Overview GET DATA 625 GET DATA read
Page 627 and 628:
READNAMES Subcommand GET DATA 627 O
Page 629 and 630:
QUALIFIER Subcommand GET DATA 629 T
Page 631 and 632:
GET SAS Overview Options GET SAS DA
Page 633 and 634:
GET SAS 633 • Value labels read f
Page 635 and 636:
GET TRANSLATE GET TRANSLATE FILE=fi
Page 637 and 638:
GET TRANSLATE 637 • The first row
Page 639 and 640:
GET TRANSLATE 639 • For string va
Page 641 and 642:
GET TRANSLATE 641 • RANGE cannot
Page 643 and 644:
GLM: Overview GLM is available in t
Page 645 and 646:
GLM: Overview 645 • Display expec
Page 647 and 648:
Model 2: Fixed-effects ANOVA and MA
Page 649 and 650:
GLM: Overview 649 For univariate an
Page 651 and 652:
GLM: Univariate GLM is available in
Page 653 and 654:
Basic Specification GLM: Univariate
Page 655 and 656:
GLM: Univariate 655 • If you spec
Page 657 and 658:
INTERCEPT Subcommand GLM: Univariat
Page 659 and 660:
GLM: Univariate 659 LOF Perform a l
Page 661 and 662:
GLM: Univariate 661 • A coefficie
Page 663 and 664:
Example GLM: Univariate 663 GLM DEP
Page 665 and 666:
Example GLM: Univariate 665 GLM DEP
Page 667 and 668:
GLM: Univariate 667 • Multiple PO
Page 669 and 670:
COMPARE(factor) ADJ(method) GLM: Un
Page 671 and 672:
DESIGN Subcommand GLM: Univariate 6
Page 673 and 674:
Overview Options GLM: Multivariate
Page 675 and 676:
GLM: Multivariate 675 Residual cova
Page 677 and 678:
GLM: Repeated Measures GLM is avail
Page 679 and 680:
Subcommand Order • The list of de
Page 681 and 682:
GLM: Repeated Measures 681 • Leve
Page 683 and 684:
GLM: Repeated Measures 683 • WSFA
Page 685 and 686:
GLM: Repeated Measures 685 • Thes
Page 687 and 688:
GRAPH 687 The following table shows
Page 689 and 690:
GRAPH 689 NGT(x) Number of cases fo
Page 691 and 692:
• The default span (2) and sigma
Page 693 and 694:
GRAPH 693 Figure 3 /BAR=MEAN(SALBEG
Page 695 and 696:
GRAPH 695 Figure 9 /BAR(STACKED)=CO
Page 697 and 698:
LINE Subcommand GRAPH 697 LINE crea
Page 699 and 700:
Figure 19 /LINE=MEAN(THEFT AUTO BUR
Page 701 and 702:
Figure 25 /LINE(AREA)=COUNT BY TIME
Page 703 and 704:
Figure 31 LINE(DIFFERENCE)=VALUE(SA
Page 705 and 706:
GRAPH 705 the variable must be dich
Page 707 and 708:
ERRORBAR Subcommand GRAPH 707 ERROR
Page 709 and 710:
GRAPH 709 MATRIX Scatterplot matrix
Page 711 and 712:
Figure 49 /SCATTERPLOT(XYZ)=JOBCAT
Page 713 and 714:
Figure 52 PARETO(CUM SIMPLE)=SUM(DE
Page 715 and 716:
Elements and Attributes Dependent o
Page 717 and 718:
HILOGLINEAR Overview HILOGLINEAR is
Page 719 and 720:
Operations HILOGLINEAR 719 • HILO
Page 721 and 722:
Example HILOGLINEAR 721 HILOGLINEAR
Page 723 and 724:
Example * An Incomplete Rectangular
Page 725 and 726:
HILOGLINEAR 725 NONE No plots. Spec
Page 727 and 728:
HOMALS Overview Options HOMALS is a
Page 729 and 730:
Example HOMALS 729 Values outside o
Page 731 and 732:
HOMALS 731 The total number of vali
Page 733 and 734:
Example HOMALS 733 HOMALS VARIABLES
Page 735 and 736:
HOMALS 735 LEVEL String variable LE
Page 737 and 738:
Basic Specification IF 737 The basi
Page 739 and 740:
Example Example Example IF (AGE > 2
Page 741 and 742:
Example Example IF 741 tions on eve
Page 743 and 744:
{VERTICAL } {THREE } [/EFFECT={NONE
Page 745 and 746:
Overview Options IGRAPH 745 The int
Page 747 and 748:
CATORDER Subcommand IGRAPH 747 The
Page 749 and 750:
Example IGRAPH /VIEWNAME=’Scatter
Page 751 and 752:
CHARTLOOK Subcommand IGRAPH 751 CHA
Page 753 and 754:
FORMAT Subcommand IGRAPH 753 For ch
Page 755 and 756:
IGRAPH 755 The INTERPOLATE keyword
Page 757 and 758:
IGRAPH 757 START num Indicates the
Page 759 and 760:
Example IGRAPH /X1=VAR(region) TYPE
Page 761 and 762:
ERRORBAR Subcommand IGRAPH 761 Erro
Page 763 and 764:
IGRAPH 763 REGRESSION Fits a straig
Page 765 and 766:
IGRAPH 765 Number of Cases Less Tha
Page 767 and 768:
IMPORT IMPORT FILE=file [/TYPE={COM
Page 769 and 770:
IMPORT 769 • DROP excludes a vari
Page 771 and 772:
INCLUDE INCLUDE FILE=file Example O
Page 773 and 774:
INFO This command is not available
Page 775 and 776:
Types of Information The following
Page 777 and 778:
INPUT PROGRAM—END INPUT PROGRAM I
Page 779 and 780:
Example Example * Select cases with
Page 781 and 782:
KEYED DATA LIST KEYED DATA LIST KEY
Page 783 and 784:
Syntax Rules KEYED DATA LIST 783
Page 785 and 786:
Example * Reading a keyed file: rea
Page 787 and 788:
KM Overview KM is available in the
Page 789 and 790:
KM 789 • Only one status variable
Page 791 and 792:
STRATA Subcommand KM 791 STRATA ide
Page 793 and 794:
TEST Subcommand KM 793 TEST specifi
Page 795 and 796:
SAVE Subcommand KM 795 SAVE saves t
Page 797 and 798:
Example LEAVE 797 • Numeric varia
Page 799 and 800:
Operations Example Example LIST 799
Page 801 and 802:
LIST 801 • If SPLIT FILE is in ef
Page 803 and 804:
Temporary variables created by LOGI
Page 805 and 806:
Limitations Example LOGISTIC REGRES
Page 807 and 808:
LOGISTIC REGRESSION 807 DEVIATION(r
Page 809 and 810:
LOGISTIC REGRESSION 809 Wald statis
Page 811 and 812:
ID Subcommand LOGISTIC REGRESSION 8
Page 813 and 814:
LOGISTIC REGRESSION 813 • POUT re
Page 815 and 816:
LOGISTIC REGRESSION 815 • Assigne
Page 817 and 818:
LOGLINEAR 817 multiway contingency
Page 819 and 820:
Example Example Example Example LOG
Page 821 and 822:
LOGLINEAR 821 • To enter cell cov
Page 823 and 824:
CONTRAST Subcommand LOGLINEAR 823 C
Page 825 and 826:
Example * Contrasts for a logistic
Page 827 and 828:
Example LOGLINEAR RESPONSE(1,2) BY
Page 829 and 830:
Example * Equiprobability model LOG
Page 831 and 832:
Options LOOP—END LOOP 831 Missing
Page 833 and 834:
LOOP—END LOOP 833 • The program
Page 835 and 836:
LOOP—END LOOP 835 time, resulting
Page 837 and 838:
LOOP—END LOOP 837 • The loop is
Page 839 and 840:
MANOVA: Overview MANOVA is availabl
Page 841 and 842:
Overview Example 2 * Analysis of Co
Page 843 and 844:
MANOVA: Univariate MANOVA is availa
Page 845 and 846:
MANOVA: Univariate 845 in the model
Page 847 and 848:
MANOVA: Univariate 847 WITHIN Terms
Page 849 and 850:
MANOVA: Univariate 849 The specifie
Page 851 and 852:
MANOVA: Univariate 851 it generally
Page 853 and 854:
PARAMETERS Keyword MANOVA: Univaria
Page 855 and 856:
ERROR Keyword MANOVA: Univariate 85
Page 857 and 858:
RESIDUALS Subcommand MANOVA: Univar
Page 859 and 860:
MANOVA: Univariate 859 CELLPLOTS Ce
Page 861 and 862:
Split Files and Variable Order MANO
Page 863 and 864:
DESIGN Subcommand MANOVA: Univariat
Page 865 and 866:
MANOVA: Univariate 865 • The numb
Page 867 and 868:
MANOVA: Univariate 867 with similar
Page 869 and 870:
MANOVA: Multivariate MANOVA is avai
Page 871 and 872:
Limitations MANOVA: Multivariate 87
Page 873 and 874:
MANOVA: Multivariate 873 DEVIATION
Page 875 and 876:
MANOVA: Multivariate 875 • You mu
Page 877 and 878:
MANOVA: Multivariate 877 SINGLEDF S
Page 879 and 880:
MANOVA: Multivariate 879 ROTATE Rot
Page 881 and 882:
CONDITIONAL and UNCONDITIONAL Keywo
Page 883 and 884:
MANOVA: Repeated Measures 883 descr
Page 885 and 886:
MANOVA: Repeated Measures 885 • I
Page 887 and 888:
Example MANOVA: Repeated Measures 8
Page 889 and 890:
MANOVA: Repeated Measures 889 • A
Page 891 and 892:
1 MAPS MAPS {/GVAR = VAR(varname)[V
Page 893 and 894:
Operations 893 MAPS • Each MAPS c
Page 895 and 896:
895 MAPS • The total (sum) of sal
Page 897 and 898:
Example 897 MAPS standard deviation
Page 899 and 900:
Example 899 MAPS MAPS /GVAR = VAR(f
Page 901 and 902:
Example 901 MAPS MAPS /GVAR = VAR(c
Page 903:
Number of Cases Less Than (N of Cas
Page 906 and 907:
906 MATCH FILES Variable Names. You
Page 908 and 909:
908 MATCH FILES • If the files ha
Page 910 and 911:
910 MATCH FILES RENAME Subcommand R
Page 912 and 913:
912 MATCH FILES • FIRST creates a
Page 914 and 915:
914 MATRIX—END MATRIX INV Inverse
Page 916 and 917:
916 MATRIX—END MATRIX • A symme
Page 918 and 919:
918 MATRIX—END MATRIX Example {11
Page 920 and 921:
920 MATRIX—END MATRIX • All of
Page 922 and 923:
922 MATRIX—END MATRIX ** &* &/ &*
Page 924 and 925:
924 MATRIX—END MATRIX • The res
Page 926 and 927:
926 MATRIX—END MATRIX COMPUTE Sta
Page 928 and 929:
928 MATRIX—END MATRIX A = 111 111
Page 930 and 931:
930 MATRIX—END MATRIX DET(M) Dete
Page 932 and 933:
932 MATRIX—END MATRIX MOD(M,S) Re
Page 934 and 935:
934 MATRIX—END MATRIX and the num
Page 936 and 937:
936 MATRIX—END MATRIX • Constan
Page 938 and 939:
938 MATRIX—END MATRIX • The fir
Page 940 and 941:
940 MATRIX—END MATRIX • A logic
Page 942 and 943:
942 MATRIX—END MATRIX • The mat
Page 944 and 945:
944 MATRIX—END MATRIX FORMAT Spec
Page 946 and 947:
946 MATRIX—END MATRIX HOLD Specif
Page 948 and 949:
948 MATRIX—END MATRIX NAMES Speci
Page 950 and 951:
950 MATRIX—END MATRIX • If more
Page 952 and 953:
952 MATRIX—END MATRIX Valid keywo
Page 954 and 955:
954 MATRIX—END MATRIX • The mat
Page 956 and 957:
956 MATRIX—END MATRIX FNAMES Spec
Page 958 and 959:
MATRIX DATA MATRIX DATA VARIABLES=v
Page 960 and 961:
960 MATRIX DATA Table 1 summarizes
Page 962 and 963:
962 MATRIX DATA Example • No othe
Page 964 and 965:
964 MATRIX DATA Example * Matrix da
Page 966 and 967:
966 MATRIX DATA • ROWTYPE_ is spe
Page 968 and 969:
968 MATRIX DATA FULL do not enter t
Page 970 and 971:
970 MATRIX DATA • The split varia
Page 972 and 973:
972 MATRIX DATA Example MATRIX DATA
Page 974 and 975:
974 MATRIX DATA Within-Cells Record
Page 976 and 977:
976 MATRIX DATA • Because ROWTYPE
Page 978 and 979:
978 MCONVERT • If there are multi
Page 980 and 981:
MEANS Overview Options MEANS [TABLE
Page 982 and 983:
982 MEANS • The first table list
Page 984 and 985:
984 MEANS LINEARITY Test of lineari
Page 986 and 987:
986 MISSING VALUES • For date for
Page 988 and 989:
MIXED MIXED is available in the Adv
Page 990 and 991:
990 MIXED Models The following are
Page 992 and 993:
992 MIXED Basic Specification • T
Page 994 and 995:
994 MIXED ARMA1 Autoregressive movi
Page 996 and 997:
996 MIXED Example matrix: σ2 1 σ2
Page 998 and 999:
998 MIXED Variable List The variabl
Page 1000 and 1001:
1000 MIXED WITH (option) Covariate
Page 1002 and 1003:
1002 MIXED • The following option
Page 1004 and 1005:
1004 MIXED Otherwise, it will be ig
Page 1006 and 1007:
1006 MIXED REGWGT Subcommand The RE
Page 1008 and 1009:
1008 MIXED Example MIXED SCORE BY S
Page 1010 and 1011:
1010 MIXED Interpretation of Random
Page 1012 and 1013:
1012 MIXED
Page 1014 and 1015:
1014 Syntax Reference Examples MODE
Page 1016 and 1017:
1016 MRSETS These variables are cod
Page 1018 and 1019:
1018 MRSETS DISPLAY Subcommand /DIS
Page 1020 and 1021:
1020 MULT RESPONSE Options did not
Page 1022 and 1023:
1022 MULT RESPONSE • The group na
Page 1024 and 1025:
1024 MULT RESPONSE TABLES Subcomman
Page 1026 and 1027:
1026 MULT RESPONSE ROW Row percenta
Page 1028 and 1029:
1028 MULT RESPONSE The following ke
Page 1030 and 1031:
1030 MVA Overview Options [/REGRESS
Page 1032 and 1033:
1032 MVA Symbols The symbols displa
Page 1034 and 1035:
1034 MVA Examples MVA VARIABLES=pop
Page 1036 and 1037:
1036 MVA PERCENT=n Omit rows for va
Page 1038 and 1039:
1038 MVA TPATTERN Subcommand The TP
Page 1040 and 1041:
1040 MVA CONVERGENCE=value Converge
Page 1042 and 1043:
1042 MVA ADDTYPE Type of distributi
Page 1044 and 1045:
NLR NLR and CNLR are available in t
Page 1046 and 1047:
1046 NLR Basic Specification The ba
Page 1048 and 1049:
1048 NLR • The two COMPUTE statem
Page 1050 and 1051:
1050 NLR Example MODEL PROGRAM A=1,
Page 1052 and 1053:
1052 NLR • Some new parameters ma
Page 1054 and 1055:
1054 NLR Example MODEL PROGRAM A=.5
Page 1056 and 1057:
1056 NLR sponding to a more accurat
Page 1058 and 1059:
1058 NLR Nonlinear Constraints Nonl
Page 1060 and 1061:
1060 NLR • CNLR generates the boo
Page 1062 and 1063:
1062 N OF CASES Example GET FILE=CI
Page 1064 and 1065:
1064 NOMREG Overview Options NOMREG
Page 1066 and 1067:
1066 NOMREG mates convergence crite
Page 1068 and 1069:
1068 NOMREG B are factors. The expr
Page 1070 and 1071:
1070 NOMREG • The initial model c
Page 1072 and 1073:
1072 NOMREG • Only one OUTFILE su
Page 1074 and 1075:
1074 NOMREG SCALE Subcommand The SC
Page 1076 and 1077:
NONPAR CORR Overview Options NONPAR
Page 1078 and 1079:
1078 NONPAR CORR Example NONPAR COR
Page 1080 and 1081:
1080 NONPAR CORR Format of the Matr
Page 1082 and 1083:
NPAR TESTS NPAR TESTS [CHISQUARE=va
Page 1084 and 1085:
1084 NPAR TESTS Options Statistical
Page 1086 and 1087:
1086 NPAR TESTS • If more than 0.
Page 1088 and 1089:
1088 NPAR TESTS Operations Example
Page 1090 and 1091:
1090 NPAR TESTS Example • A test
Page 1092 and 1093:
Page 1094 and 1095:
1094 NPAR TESTS MEDIAN Subcommand S
Page 1096 and 1097:
1096 NPAR TESTS MOSES Subcommand Sy
Page 1098 and 1099:
Page 1100 and 1101:
1100 NPAR TESTS Example • Under t
Page 1102 and 1103:
NUMERIC NUMERIC varlist[(format)] [
Page 1104 and 1105:
OLAP CUBES OLAP CUBES {varlist} BY
Page 1106 and 1107:
1106 OLAP CUBES • A Layered Repor
Page 1108 and 1109:
1108 OLAP CUBES The percentage diff
Page 1110 and 1111:
OMS Note: Square brackets used in t
Page 1112 and 1113:
1112 OMS bles from the FREQUENCIES
Page 1114 and 1115:
1114 OMS Example OMS /SELECT TABLES
Page 1116 and 1117:
1116 OMS be followed by an equals s
Page 1118 and 1119:
1118 OMS SVWSOXML XML used by Smart
Page 1120 and 1121:
1120 OMS • The first OMS command
Page 1122 and 1123:
1122 OMS keyword must be followed b
Page 1124 and 1125:
1124 OMS Figure 4 Single two-dimens
Page 1126 and 1127:
1126 OMS Figure 6 Multiple Tables w
Page 1128 and 1129:
1128 OMS Figure 8 Tables with diffe
Page 1130 and 1131:
1130 OMS tics in the columns. To in
Page 1132 and 1133:
1132 OMS Figure 11 Variable names i
Page 1134 and 1135:
1134 OMS Figure 13 OXML for simple
Page 1136 and 1137:
1136 OMS Command and Subtype Identi
Page 1138 and 1139:
1138 OMS Table 2 Command Command Id
Page 1140 and 1141:
Page 1142 and 1143:
Page 1144 and 1145:
Page 1146 and 1147: 1146 OMS Table 2 Command Command Id
Page 1154 and 1155: OMSINFO OMSINFO. Example OMSINFO. O
Page 1156 and 1157: 13 1156 OMSEND OMSEND Note: Square
Page 1158 and 1159: OMSLOG OMSLOG FILE = ’filespec’
Page 1160 and 1161: ONEWAY Overview Options ONEWAY varl
Page 1162 and 1163: 1162 ONEWAY Analysis List The analy
Page 1164 and 1165: 1164 ONEWAY groups. In addition, ho
Page 1166 and 1167: 1166 ONEWAY • Up to 10 RANGE subc
Page 1168 and 1169: 1168 ONEWAY • The dependent varia
Page 1170 and 1171: ORTHOPLAN Overview Options ORTHOPLA
Page 1172 and 1173: 1172 ORTHOPLAN Example • The FACT
Page 1174 and 1175: 1174 ORTHOPLAN • MINIMUM is follo
Page 1176 and 1177: 1176 Syntax Reference Basic Specifi
Page 1178 and 1179: 1178 Syntax Reference SETS Subcomma
Page 1180 and 1181: 1180 Syntax Reference CONVERGENCE S
Page 1182 and 1183: 1182 Syntax Reference SAVE Subcomma
Page 1185 and 1186: PACF Overview Options PACF [VARIABL
Page 1187 and 1188: PACF 1187 • DIFF differences the
Page 1189 and 1190: PACF 1189 • If SEASONAL is specif
Page 1191 and 1192: PARTIAL CORR Overview Options PARTI
Page 1193 and 1194: VARIABLES Subcommand PARTIAL CORR 1
Page 1195: FORMAT Subcommand FORMAT determines
Page 1199 and 1200: PARTIAL CORR 1199 • REGRESSION co
Page 1201 and 1202: PERMISSIONS PERMISSIONS FILE=’fil
Page 1203 and 1204: PLANCARDS Overview Options PLANCARD
Page 1205 and 1206: Example PLANCARDS 1205 DATA LIST FR
Page 1207 and 1208: Figure 2 Single-profile format Prof
Page 1209: Profile # 1 Circle the number in th
Page 1212 and 1213: 1212 PLUM Basic Specification The b
Page 1214 and 1215: 1214 PLUM value. The criterion is n
Page 1216 and 1217: 1216 PLUM CELLINFO Cell Information
Page 1218 and 1219: 1218 PLUM • Covariates can be con
Page 1220 and 1221: POINT POINT KEY=varname [FILE=file]
Page 1222 and 1223: 1222 POINT Example • DATA LIST re
Page 1224 and 1225: PPLOT PPLOT [VARIABLES=] varlist [/
Page 1226 and 1227: 1226 PPLOT Operations • Subcomman
Page 1228 and 1229: 1228 PPLOT FRACTION Subcommand FRAC
Page 1230 and 1231: 1230 PPLOT • In low resolution, a
Page 1232 and 1233: 1232 PPLOT • If a natural log tra
Page 1234 and 1235: PREDICT PREDICT [{start date }] [TH
Page 1236 and 1237: 1236 PREDICT • If there is a gap
Page 1238 and 1239: PRESERVE PRESERVE Overview PRESERVE
Page 1240 and 1241: 1240 Syntax Reference Basic Specifi
Page 1242 and 1243: 1242 Syntax Reference Example DATA
Page 1244 and 1245: 1244 Syntax Reference CONVERGENCE S
Page 1246 and 1247:
1246 Syntax Reference SAVE Subcomma
Page 1248 and 1249:
1248 Syntax Reference VARNAME_ Stri
Page 1250 and 1251:
1250 PRINT Syntax Rules • A slash
Page 1252 and 1253:
1252 PRINT Strings You can specify
Page 1254 and 1255:
1254 PRINT Example PRINT OUTFILE=PR
Page 1256 and 1257:
1256 PRINT EJECT Basic Specificatio
Page 1258 and 1259:
PRINT FORMATS PRINT FORMATS varlist
Page 1260 and 1261:
1260 PRINT FORMATS Example COMPUTE
Page 1262 and 1263:
1262 PRINT SPACE Example PRINT / NA
Page 1264 and 1265:
PROBIT Overview Options PROBIT is a
Page 1266 and 1267:
1266 PROBIT • If individual cases
Page 1268 and 1269:
1268 PROBIT • Keywords BY and WIT
Page 1270 and 1271:
1270 PROBIT mately six significant
Page 1272 and 1273:
1272 PROBIT RMP Relative median pot
Page 1274 and 1275:
1274 PROCEDURE OUTPUT Example PROCE
Page 1276 and 1277:
1276 PROXIMITIES Example Overview O
Page 1278 and 1279:
1278 PROXIMITIES RANGE Standardize
Page 1280 and 1281:
1280 PROXIMITIES CORRELATION( xy ,
Page 1282 and 1283:
1282 PROXIMITIES 0, 1, 1, 0, 0 for
Page 1284 and 1285:
1284 PROXIMITIES K1[(p[,np])] Kulcz
Page 1286 and 1287:
1286 PROXIMITIES SS5[(p[,np])] Soka
Page 1288 and 1289:
1288 PROXIMITIES • When used with
Page 1290 and 1291:
1290 PROXIMITIES analysis. If a var
Page 1292 and 1293:
1292 PROXIMITIES Example Example GE
Page 1294 and 1295:
1294 PROXIMITIES
Page 1296 and 1297:
1296 Syntax Reference Overview Opti
Page 1298 and 1299:
1298 Syntax Reference Example DATA
Page 1300 and 1301:
1300 Syntax Reference Example DATA
Page 1302 and 1303:
1302 Syntax Reference TORGERSON Tor
Page 1304 and 1305:
1304 Syntax Reference SPLINE Monoto
Page 1306 and 1307:
1306 Syntax Reference number of cas
Page 1308 and 1309:
1308 Syntax Reference DIFFSTRESS Co
Page 1310 and 1311:
1310 Syntax Reference PLOT Subcomma
Page 1312 and 1313:
1312 Syntax Reference cases in the
Page 1314 and 1315:
1314 QUICK CLUSTER distances betwee
Page 1316 and 1317:
1316 QUICK CLUSTER is specified, QU
Page 1318 and 1319:
1318 QUICK CLUSTER NONE No addition
Page 1320 and 1321:
RANK RANK [VARIABLES=] varlist [({A
Page 1322 and 1323:
1322 RANK • String variables cann
Page 1324 and 1325:
1324 RANK TIES Subcommand TIES dete
Page 1326 and 1327:
RATIO STATISTICS RATIO STATISTICS n
Page 1328 and 1329:
1328 RATIO STATISTICS • Keywords
Page 1330 and 1331:
1330 RATIO STATISTICS MEAN Mean. Th
Page 1332 and 1333:
1332 Syntax Reference Syntax Rules
Page 1334 and 1335:
RECODE For numeric variables: RECOD
Page 1336 and 1337:
1336 RECODE • SYSMIS specifies th
Page 1338 and 1339:
1338 RECODE • Values for V1 throu
Page 1340 and 1341:
RECORD TYPE For mixed file types: R
Page 1342 and 1343:
1342 RECORD TYPE Example * Reading
Page 1344 and 1345:
1344 RECORD TYPE Example * A mixed
Page 1346 and 1347:
1346 RECORD TYPE Example * Specifyi
Page 1348 and 1349:
1348 RECORD TYPE • SPREAD can be
Page 1350 and 1351:
1350 REFORMAT Example * Convert an
Page 1352 and 1353:
1352 REGRESSION Overview Options RE
Page 1354 and 1355:
1354 REGRESSION • The DEPENDENT s
Page 1356 and 1357:
1356 REGRESSION • When more than
Page 1358 and 1359:
1358 REGRESSION Equation Statistics
Page 1360 and 1361:
1360 REGRESSION PIN[(value)] Probab
Page 1362 and 1363:
1362 REGRESSION • COMPUTE creates
Page 1364 and 1365:
1364 REGRESSION • If SELECT is sp
Page 1366 and 1367:
1366 REGRESSION MISSING Subcommand
Page 1368 and 1369:
1368 REGRESSION: Residuals (RESIDUA
Page 1370 and 1371:
1370 REGRESSION: Residuals • REGR
Page 1372 and 1373:
1372 REGRESSION: Residuals are RESI
Page 1374 and 1375:
1374 REGRESSION: Residuals Example
Page 1376 and 1377:
RELIABILITY Overview RELIABILITY VA
Page 1378 and 1379:
1378 RELIABILITY • This example a
Page 1380 and 1381:
1380 RELIABILITY ICC Subcommand ICC
Page 1382 and 1383:
1382 RELIABILITY Matrix Output Matr
Page 1384 and 1385:
1384 RELIABILITY Example Example Ex
Page 1386 and 1387:
RENAME VARIABLES RENAME VARIABLES {
Page 1388 and 1389:
REPEATING DATA REPEATING DATA [FILE
Page 1390 and 1391:
1390 REPEATING DATA • The DATA LI
Page 1392 and 1393:
1392 REPEATING DATA Example Figure
Page 1394 and 1395:
1394 REPEATING DATA STARTS Subcomma
Page 1396 and 1397:
1396 REPEATING DATA • In the data
Page 1398 and 1399:
1398 REPEATING DATA CONTINUED Subco
Page 1400 and 1401:
1400 REPEATING DATA in positions 1-
Page 1402 and 1403:
REPORT REPORT [/FORMAT=[{MANUAL }]
Page 1404 and 1405:
1404 REPORT Column Widths. Default
Page 1406 and 1407:
1406 REPORT statistics. The maximum
Page 1408 and 1409:
1408 REPORT Example • The maximum
Page 1410 and 1411:
1410 REPORT headings with the first
Page 1412 and 1413:
1412 REPORT Figure 1 Page layout fo
Page 1414 and 1415:
1414 REPORT Example REPORT FORMAT=A
Page 1416 and 1417:
1416 REPORT Column Format The follo
Page 1418 and 1419:
1418 REPORT BREAK Subcommand BREAK
Page 1420 and 1421:
1420 REPORT (OFFSET) Position of th
Page 1422 and 1423:
1422 REPORT • To use the summary
Page 1424 and 1425:
1424 REPORT means of all three vari
Page 1426 and 1427:
1426 REPORT • The summary title m
Page 1428 and 1429:
1428 REPORT Table 3 Default print f
Page 1430 and 1431:
1430 REPORT • The right-justified
Page 1432 and 1433:
1432 REREAD Subcommand Order Subcom
Page 1434 and 1435:
1434 REREAD FILE Subcommand FILE sp
Page 1436 and 1437:
1436 REREAD Example * Reading both
Page 1438 and 1439:
RMV RMV new variables={LINT (varlis
Page 1440 and 1441:
1440 RMV • NEWVAR1 will have the
Page 1442 and 1443:
ROC Overview Options ROC varlist BY
Page 1444 and 1445:
1444 ROC MISSING Subcommand Cases w
Page 1446 and 1447:
SAMPLE SAMPLE {decimal value} {n FR
Page 1448 and 1449:
SAVE SAVE OUTFILE=’filespec’ [/
Page 1450 and 1451:
1450 SAVE Example GET FILE=HUBEMPL.
Page 1452 and 1453:
1452 SAVE Example GET FILE=PRSNL. C
Page 1454 and 1455:
1454 SAVE PERMISSIONS Subcommand Th
Page 1456 and 1457:
1456 Syntax Reference SAVE MODEL Ov
Page 1458 and 1459:
1458 Syntax Reference TYPE Subcomma
Page 1460 and 1461:
1460 SAVE TRANSLATE ** Required for
Page 1462 and 1463:
1462 SAVE TRANSLATE • User-missin
Page 1464 and 1465:
1464 SAVE TRANSLATE The following t
Page 1466 and 1467:
1466 SAVE TRANSLATE WK1 1-2-3 Relea
Page 1468 and 1469:
1468 SAVE TRANSLATE CELLS Subcomman
Page 1470 and 1471:
1470 SAVE TRANSLATE Example SAVE TR
Page 1472 and 1473:
1472 SCRIPT
Page 1474 and 1475:
1474 Syntax Reference Subcommand Or
Page 1476 and 1477:
1476 Syntax Reference PERIOD Subcom
Page 1478 and 1479:
SELECT IF SELECT IF [(]logical expr
Page 1480 and 1481:
1480 SELECT IF Missing Values • I
Page 1482 and 1483:
1482 SELECT IF Example Example Exam
Page 1484 and 1485:
1484 SET [HEADER={NO** }] {YES } {B
Page 1486 and 1487:
1486 SET Operations Example • Set
Page 1488 and 1489:
1488 SET LABELS Displays variable l
Page 1490 and 1491:
1490 SET JOURNAL Subcommand Alias t
Page 1492 and 1493:
1492 SET SPSSB in the server versio
Page 1494 and 1495:
1494 SET • You can specify any le
Page 1496 and 1497:
1496 SET Example SET SMALL = 0. SET
Page 1498 and 1499:
SHOW SHOW [ALL] [BLANKS] [BLKSIZE]
Page 1500 and 1501:
1500 SHOW EPOCH Range of years for
Page 1502 and 1503:
1502 SHOW WEIGHT Variable used to w
Page 1504 and 1505:
1504 SORT CASES addition, special c
Page 1506 and 1507:
1506 SPCHART Overview Options SPCHA
Page 1508 and 1509:
1508 SPCHART • The default span (
Page 1510 and 1511:
1510 SPCHART Figure 3 S chart Data
Page 1512 and 1513:
1512 SPCHART Figure 4 Individuals c
Page 1514 and 1515:
1514 SPCHART Figure 7 NP chart Data
Page 1516 and 1517:
1516 SPCHART based on the Poisson d
Page 1518 and 1519:
1518 SPCHART • A duplicated subco
Page 1520 and 1521:
1520 SPCHART CAPSIGMA Subcommand Th
Page 1522 and 1523:
1522 SPCHART fixed control limits a
Page 1524 and 1525:
1524 Syntax Reference SPECTRA Overv
Page 1526 and 1527:
1526 Syntax Reference Syntax Rules
Page 1528 and 1529:
1528 Syntax Reference TUKEY Tukey-H
Page 1530 and 1531:
1530 Syntax Reference SAVE Subcomma
Page 1532 and 1533:
1532 Syntax Reference References
Page 1534 and 1535:
1534 SPLIT FILE • AGGREGATE ignor
Page 1536 and 1537:
STRING STRING varlist (An) [/varlis
Page 1538 and 1539:
SUBTITLE SUBTITLE [’]text[’] Ex
Page 1540 and 1541:
SUMMARIZE SUMMARIZE [TABLES=]{varli
Page 1542 and 1543:
1542 SUMMARIZE Example the FORMAT s
Page 1544 and 1545:
1544 SUMMARIZE GEOMETRIC Geometric
Page 1546 and 1547:
SURVIVAL Overview SURVIVAL is avail
Page 1548 and 1549:
1548 SURVIVAL Operations • SURVIV
Page 1550 and 1551:
1550 SURVIVAL • INTERVALS produce
Page 1552 and 1553:
1552 SURVIVAL HAZARD Plot the hazar
Page 1554 and 1555:
1554 SURVIVAL large samples. It is
Page 1556 and 1557:
1556 SURVIVAL WRITE Subcommand Form
Page 1558 and 1559:
1558 SURVIVAL • Record type 31 is
Page 1560 and 1561:
1560 SYSFILE INFO
Page 1562 and 1563:
1562 Syntax Reference Operations Ex
Page 1564 and 1565:
1564 TEMPORARY Example • The XSAV
Page 1566 and 1567:
TITLE TITLE [’]text[’] Example
Page 1568 and 1569:
TSET TSET [PRINT={DEFAULT**}] [/NEW
Page 1570 and 1571:
1570 TSET MXPREDICT Subcommand MXPR
Page 1572 and 1573:
TSPLOT TSPLOT [VARIABLES=] variable
Page 1574 and 1575:
1574 TSPLOT Subcommand Order • Su
Page 1576 and 1577:
1576 TSPLOT Example TSPLOT TICKETS
Page 1578 and 1579:
1578 TSPLOT Figure 3 FORMAT=REFEREN
Page 1580 and 1581:
1580 TSPLOT UNIFORM Scale uniformly
Page 1582 and 1583:
1582 T-TEST degrees of freedom, and
Page 1584 and 1585:
1584 T-TEST PAIRS Subcommand PAIRS
Page 1586 and 1587:
2SLS Overview Options 2SLS is avail
Page 1588 and 1589:
1588 2SLS • In this example, Y1 i
Page 1590 and 1591:
1590 2SLS • In this example, the
Page 1592 and 1593:
TWOSTEP CLUSTER Overview TWOSTEP CL
Page 1594 and 1595:
1594 TWOSTEP CLUSTER Example TWOSTE
Page 1596 and 1597:
1596 TWOSTEP CLUSTER Example TWOSTE
Page 1598 and 1599:
1598 TWOSTEP CLUSTER STATE Save the
Page 1600 and 1601:
1600 TWOSTEP CLUSTER SUMMARY Descri
Page 1602 and 1603:
1602 UNIANOVA Overview Options ** D
Page 1604 and 1605:
1604 UNIANOVA Example UNIANOVA YIEL
Page 1606 and 1607:
1606 UNIANOVA appropriate effect is
Page 1608 and 1609:
1608 UNIANOVA PRINT Subcommand PRIN
Page 1610 and 1611:
1610 UNIANOVA Example UNIANOVA DEP
Page 1612 and 1613:
1612 UNIANOVA • B1 versus B2 at A
Page 1614 and 1615:
1614 UNIANOVA HELMERT Helmert contr
Page 1616 and 1617:
1616 UNIANOVA Post Hoc Tests Statis
Page 1618 and 1619:
1618 UNIANOVA QREGW Ryan-Einot-Gabr
Page 1620 and 1621:
1620 UNIANOVA SRESID Studentized re
Page 1622 and 1623:
UPDATE UPDATE FILE={master file} {*
Page 1624 and 1625:
1624 UPDATE • UPDATE copies all v
Page 1626 and 1627:
1626 UPDATE BY Subcommand BY specif
Page 1628 and 1629:
1628 UPDATE • IN has only one spe
Page 1630 and 1631:
1630 USE • Values on keyword YEAR
Page 1632 and 1633:
1632 USE USE THRU 5. • This comma
Page 1634 and 1635:
1634 VALUE LABELS Operations Exampl
Page 1636 and 1637:
VARCOMP Overview Options VARCOMP is
Page 1638 and 1639:
1638 VARCOMP • You can specify mu
Page 1640 and 1641:
1640 VARCOMP The default is 1.0E-8.
Page 1642 and 1643:
1642 VARCOMP Nesting within an inte
Page 1644 and 1645:
VARIABLE LABELS VARIABLE LABELS var
Page 1646 and 1647:
VARIABLE LEVEL VARIABLE LEVEL varli
Page 1648 and 1649:
VARSTOCASES VARSTOCASES /MAKE new v
Page 1650 and 1651:
1650 VARSTOCASES The command: VARST
Page 1652 and 1653:
1652 VARSTOCASES Example VARSTOCASE
Page 1654 and 1655:
1654 VARSTOCASES COUNT Subcommand W
Page 1656 and 1657:
1656 VECTOR Syntax Rules • Multip
Page 1658 and 1659:
1658 VECTOR Example VECTOR X,Y(A5,6
Page 1660 and 1661:
1660 VECTOR • Aggregating by vari
Page 1662 and 1663:
1662 VERIFY Operations • VERIFY r
Page 1664 and 1665:
1664 WEIGHT Example • Each WEIGHT
Page 1666 and 1667:
1666 WLS without erasing values sav
Page 1668 and 1669:
1668 WLS DELTA Subcommand DELTA, al
Page 1670 and 1671:
1670 WLS Example WLS X1 WITH Y1 /SO
Page 1672 and 1673:
1672 WRITE Basic Specification The
Page 1674 and 1675:
1674 WRITE Strings • MOHIRED, YRH
Page 1676 and 1677:
WRITE FORMATS WRITE FORMATS varlist
Page 1678 and 1679:
1678 WRITE FORMATS Example COMPUTE
Page 1680 and 1681:
1680 XSAVE Basic Specification The
Page 1682 and 1683:
1682 XSAVE • Keyword ALL on KEEP
Page 1684:
1684 XSAVE • The only specificati
Page 1687 and 1688:
Appendix A Commands and Program Sta
Page 1689 and 1690:
Determining Command Order Commands
Page 1691 and 1692:
Table A.1 Commands and program stat
Page 1693 and 1694:
Input Program Commands Commands and
Page 1695 and 1696:
Appendix B IMPORT/EXPORT Character
Page 1697 and 1698:
Position Graphic Macintosh Microsof
Page 1699 and 1700:
Position Graphic Macintosh Microsof
Page 1701:
Position Graphic Macintosh 222 â 1
Page 1704 and 1705:
1704 Appendix C Figure C.1 File REC
Page 1706 and 1707:
1706 Appendix C Figure C.4 NESTED.D
Page 1708 and 1709:
1708 Appendix C • The output from
Page 1710 and 1711:
1710 Appendix C FILE TYPE GROUPED R
Page 1712 and 1713:
1712 Appendix C Figure C.8 LIST out
Page 1714 and 1715:
1714 Appendix C • REPEATING DATA
Page 1716 and 1717:
1716 Appendix C The loop terminates
Page 1718 and 1719:
1718 Appendix D Example 1: Automati
Page 1720 and 1721:
1720 Appendix D • Commands betwee
Page 1722 and 1723:
1722 Appendix D Figure D.7 Listing
Page 1724 and 1725:
1724 Appendix D You can modify the
Page 1726 and 1727:
1726 Appendix D • !TOKENS(1) spec
Page 1728 and 1729:
1728 Appendix D Figure D.15 Output
Page 1730 and 1731:
1730 Appendix D Figure D.19 !DATAGE
Page 1733 and 1734:
Appendix A Trends Options: Special
Page 1735 and 1736:
Trends Options: Special Considerati
Page 1737 and 1738:
Trends Options: Special Considerati
Page 1739 and 1740:
Subject Index active data file cach
Page 1741 and 1742:
inary shape difference in Distances
Page 1743 and 1744:
in Logistic Regression procedure, 8
Page 1745 and 1746:
in Multidimensional Scaling procedu
Page 1747 and 1748:
scratch files, 1492 data dictionary
Page 1749 and 1750:
matrices, 479 matrix input, 482 mat
Page 1751 and 1752:
in Hierarchical Loglinear Analysis
Page 1753 and 1754:
cell weights, 610, 821 contrasts, 8
Page 1755 and 1756:
hierarchical loglinear analysis, 71
Page 1757 and 1758:
in Autoregression procedure, 148- 1
Page 1759 and 1760:
See also Linear Regression procedur
Page 1761 and 1762:
linear transformations, 871 naming
Page 1763 and 1764:
date format variables, 986 defining
Page 1765 and 1766:
function precision, 1056 infinite s
Page 1767 and 1768:
in Cox Regression procedure, 302 in
Page 1769 and 1770:
output, 1489, 1494 output page size
Page 1771 and 1772:
elative risk ratio in Crosstabs pro
Page 1773 and 1774:
scientific notation controlling dis
Page 1775 and 1776:
in ROC Curve procedure, 1445 standa
Page 1777 and 1778:
fixed format, 414, 415, 416, 423 fr
Page 1779 and 1780:
date format variables, 1633 in Homo
Page 1781 and 1782:
Syntax Index !BLANKS (function) DEF
Page 1783 and 1784:
AGGREGATE (command), 90 BREAK subco
Page 1785 and 1786:
AR (subcommand) ARIMA command, 158
Page 1787 and 1788:
REPORT command, 1417 BLANKS (subcom
Page 1789 and 1790:
CASENUM$ (system variable) in PRINT
Page 1791 and 1792:
REGRESSION command, 1360 CIN (subco
Page 1793 and 1794:
SHOW command, 1499 COMPUTE (command
Page 1795 and 1796:
TWOSTEP CLUSTER command, 1600 COUNT
Page 1797 and 1798:
WRITE subcommand, 325 CROSSVALID (k
Page 1799 and 1800:
Symbols D (keyword) CLUSTER command
Page 1801 and 1802:
NPAR TESTS command, 1100 ONEWAY com
Page 1803 and 1804:
DISPER (keyword) CLUSTER command, 2
Page 1805 and 1806:
MIXED command, 999 UNIANOVA command
Page 1807 and 1808:
EXPERIMENTAL (keyword) ANOVA comman
Page 1809 and 1810:
MEANS command, 983 PROXSCAL command
Page 1811 and 1812:
GAC (keyword) OLAP CUBES command, 1
Page 1813 and 1814:
TEST(SSCP) keyword, 674 TUKEY keywo
Page 1815 and 1816:
HISTORY (keyword) CATPCA command, 2
Page 1817 and 1818:
INCLUDE (command), 771 FILE subcomm
Page 1819 and 1820:
JITTER (keyword) IGRAPH command, 75
Page 1821 and 1822:
LEAVE (command), 796 LEFT (keyword)
Page 1823 and 1824:
CWEIGHT subcommand, 821 DESIGN subc
Page 1825 and 1826:
ROVMAP subcommand, 896 SHOWLABEL su
Page 1827 and 1828:
RMV command, 1440 MEAN (keyword) AN
Page 1829 and 1830:
MANOVA command, 858 MEANS command,
Page 1831 and 1832:
CATREG command, 212 MULTIPUNCH (key
Page 1833 and 1834:
NMISS (function) AGGREGATE command,
Page 1835 and 1836:
NOREFERENCE (keyword) TSPLOT comman
Page 1837 and 1838:
CATREG command, 215 ODBC (keyword)
Page 1839 and 1840:
RATIO STATISTICS command, 1328 REGR
Page 1841 and 1842:
PER (keyword) SPECTRA command, 1530
Page 1843 and 1844:
SUMMARY keyword, 1216 TEST subcomma
Page 1845 and 1846:
CATREG command, 215 CLUSTER command
Page 1847 and 1848:
QUANT (keyword) CATPCA command, 200
Page 1849 and 1850:
with FORMATS command, 1349 REG (key
Page 1851 and 1852:
CSTABULATE command, 374 CURVEFIT co
Page 1853 and 1854:
SAMPLEFILE (subcommand) CSSELECT co
Page 1855 and 1856:
SEED (keyword) CSSELECT command, 34
Page 1857 and 1858:
MXLOOPS subcommand, 1500 MXMEMORY s
Page 1859 and 1860:
SP (subcommand) ARIMA command, 156-
Page 1861 and 1862:
DISCRIMINANT command, 479 FREQUENCI
Page 1863 and 1864:
Symbols T (function) MATRIX command
Page 1865 and 1866:
TOLERANCE (subcommand) DISCRIMINANT
Page 1867 and 1868:
UNCLASSIFIED (keyword) DISCRIMINANT
Page 1869 and 1870:
REPORT command, 1414, 1418 value la
Page 1871 and 1872:
VIN (subcommand) DISCRIMINANT comma
Page 1873 and 1874:
X1MULTIPLIER (keyword) IGRAPH comma
show all

SPSS® 12.0 Command Syntax Reference

Create successful ePaper yourself

Delete template?

Save as template?