STAR*NET V6 - Circe

Chapter 4 Options
Before you can start using the instrument library settings for an adjustment, you have to
add instruments to the library. To add an instrument:
1. Press the “New Company Instrument” or “New Project Instrument” button on the
Instrument Library dialog shown on the previous page, depending on which you
want to add. An instrument settings dialog will open as shown below.
2. Enter an Instrument Name and an optional Note describing your weighting scheme.
3. Make any changes to the settings required for your weighting scheme.
4. Press OK to save this named instrument to the library.
You have now added a named instrument, a new weighting scheme, to the library. To
add more weighting schemes, continue repeating the steps above.
Notes regarding Instrument Settings:
The units shown in the dialog are the same as your project. If you change your
project units, both the values and units labels in this dialog will be converted.
The “Note” entered in the field above is only for your own reference and has no
other purpose in program operation.
The “Copy Settings to Current Project Defaults” button in the settings dialog shown
above allows you copy these settings to your current project.
37