STAR*NET V6 - Circe

Appendix A STAR*NET Tutorial
1. Open the “Resection.prj” example project.
2. Review the project options if you wish. This is a standard 2D, local project.
3. Examine the input data file.
Note that all stations are fixed with the “!” symbol, except for the unknown station
“P48” which is free. The angles default to the standard error for angles set in the
Project Options/Instrument options dialog.
4. Run the adjustment.
Review the processing summary on the screen. Note that in the short statistical
summary, the only observation type listed is the angle, and the adjustment passes the
Chi Square test.
5. Look at the network graphically.
You will see only one error ellipse since there was only one unknown point in the
whole network.
6. Review the listing file.
It’s quite short since our only observations are angles.
7. This completes the review of the “Resection” example project.
183