STAR*NET V6 - Circe

Appendix A STAR*NET Tutorial
In the “Adjusted Bearings and Horizontal Distances” section previously seen in other
examples in this tour, the bearing shown is now a “grid” bearing, and both “grid” and
“ground” distances are now shown for every network connection.
Finally, look at the “Traverse Closures of Unadjusted Observations” section. Since
this is a “grid” job, the listing of traverse closures is based on unadjusted bearings
and distances that are reduced to the grid plane.
6. See what other files were created by the adjustment by looking at the items that show
up in the Output menu. Before we’ve seen the Coordinates file. And now we see a
Lat/Longs (geodetic positions) file. The creation of both these files were requested in
the “Project Options/Other Files” dialog. Go ahead and view one or both of these
files if you wish.
7. This completes the review of the “Grid3D” example project. Since this is the only
“grid” job in our tutorial examples, we went into extra detail reviewing the option
settings and output sections relating to grid adjustments.
181