STAR*NET V6 - Circe

Chapter 7 Viewing and Printing Output
7.6 Viewing and Printing the Network Plot
To view the Plot, choose Output>Plot, or press the Plot tool button.
Four tool button groupings allow you to perform several plotting functions:
The first group are zoom buttons. Use them to zoom in and out, zoom to extents, and
return to the previous zoom.
The next group includes “Center-on-Click” and “Pan” features. These buttons set
modes which remain in effect until the button is again pressed, or until you rightclick
on the plot. Use the “center-on-click” mode to click on a network feature and
cause that point to center in the plot window. When the “pan” mode is active, a small
hand appears as the mouse cursor. Drag this hand to pan the plot image.
The next two buttons bring up “Find” and “Inverse” dialogs. Type a point name in
the Find dialog or select it from the list. Press “Find” and the plot will center on that
point. In the Inverse dialog, type point names in the From/To fields, or select them
from the list, or click the points in the plot (which fills-in the names) and press
“Inverse.” An information box appears showing the inversed distance, azimuth and
elevation difference. See the example above. Note that the Find and Inverse dialogs
both may be moved off to the side of the plot, and they will stay there, out of the
way, while the plot window is open.
The last button brings up a “Plot Options” dialog which is explained next.
113