STAR*NET V6 - Circe

7.4 Viewing the Error File
Chapter 7 Viewing and Printing Output
During an adjustment, errors or warnings messages may be issued by the program. If the
processing summary indicates that there were errors or warnings, you should always
view them to see what course of action should be taken.
To view the Error file, choose Output>Errors, or press the Errors tool button. Note that
the Errors tool button (the red exclamation mark) only becomes active if an error file has
been created. And like other output files, when the error file window is active, the file
can be printed by choosing File>Print, or by pressing the Print tool button.
7.5 Viewing Adjusted Points
Several types of adjusted point files are optionally created during an adjustment,
including the coordinates, latitudes and longitudes (for grid jobs), and scaled-to-ground
coordinates. View any of these files by selecting them from the Output menu.
And like any of the output files, when selected file window is active, the file can be
printed by choosing File>Print, or by pressing the Print tool button.
Another output file, the comma-delimited dump, contains detailed information about
every adjusted station. It can be viewed and printed just like the other adjusted points
files above, however, its primary purpose is for importing into a spread sheet or database
program as discussed in Chapter 4, “Options.”
112