STAR*NET V6 - Circe

Chapter 7 VIEWING AND PRINTING OUTPUT
7.1 Overview
The output menu allows you to view output files resulting from running an adjustment,
or from running any of the other types of processing from the Run menu described in the
last chapter. The “Listing” and “Plot” are the two types of output that you usually will
view immediately after an adjustment. There are tool buttons provided for these two
outputs so you can quickly and easily select them.
7.2 Output Files
The following output can be viewed and printed directly from this menu. Some of these
files are created only if options are set in the Project Options requesting them.
Listing File - This file is the most important of all output files. It contains detailed
results from the current run and is the main output document from an adjustment.
The information in this file includes summary of input, adjustment statistical
summary and adjusted observations and residuals output. It is described in detail in
the next chapter, “Analysis of Adjustment Output.”
Error File – Only created when the run produces errors or warnings.
Coordinates File – Adjusted coordinates, optional.
Lat/Longs File – Adjusted Geodetic Positions from a grid job, optional.
Ground File – Scaled-to-Ground coordinates, optional.
Dump File – Comma delimited coordinate information file, optional.
Plot – The graphical network screen plot is created by the program from a special
binary file created during the run.
109