Greenlee Catalog - Delco Wire and Cable Limited

Holemaking
USA CANADA INTERNATIONAL
Tel: 800.435.0786 Tel: 800.435.0786 Tel: +1.815.397.7070
Fax: 800.451.2632 Fax: 800.524.2853 Fax: +1.815.397.9247
56
MADE FOR THE TRADE!
STANDARD KNOCKOUT PUNCHES
Standard Round Knockout Punches 0.5" to 6" Conduit and Pipe
Ball Bearing
Nut
Bushing
Die
Draw Stud
Punch
• Round standard metal punch units are complete units consisting
of punch, die and draw stud.
• Use with battery-powered, hydraulic, ratchet or manual drivers.
• Properly assembled through pilot holes, they will make clean, fast
and accurate holes.
specificatioNs
*cat. No. upc No. descriptioN
capacity Mild steel up through 10 gauge (3.5 mm).
application Punch mild steel, aluminum, fiberglass and plastic.
hole sizes Conduit Sizes - Hole size is outside diameter of US conduit sizes.
Example: 1/2" conduit size punch actually makes a 7/8" hole.
Pg Sizes - European standard pipe sizes.
ISO Sizes - International Standards Organization pipe sizes.
operation Operate with battery-powered, hydraulic, ratchet or manual drivers.
When used with battery-powered, hydraulic, or ratchet drivers buy the
punch and die only; the draw stud is part of the driver kit.
Every cut quick and clean Slug falls free in die.
...Just tip it out.
3037AV O4686 Bushing for 3-1/2" (conduit hole size) and larger punches with manual operation