Greenlee Catalog - Delco Wire and Cable Limited

Open Barrel Contact Pin Crimper
SPECIFICATIONS
Weight 14 oz. (400 g)
Range Small: 24-22 AWG (0.05-.20 mm2)
Medium: 18-14 AWG (.34-.75 mm2)
Open Barrel D-Sub Contact Pin Crimper
SPECIFICATIONS
Weight 14 oz. (400 g)
Range Small: 28-24 AWG (0.08-.20 mm2)
Medium: 22-20 AWG (.34-.50 mm2)
D-Sub Indent Crimpers
SPECIFICATIONS
Weight 11 oz. (312 g)
Not for use on hardened steel, brass or phosphor bronze contacts
Non-Insulated Terminal Crimper
SPECIFICATIONS
Weight 13.5 oz. (380 g)
Range Small: 28-24 AWG (0.5 - 1.5 mm2)
Medium: 16-14 AWG (1.5 - 2.5 mm2)
Large: 12-10 AWG (4.0 - 6.0 mm2)
= new producT = Replacement paRt = accessoRy
Professional crimping tool for open-barrel box and round connector
contacts with a wire range of 24-14 AWG (0.2-2.5 mm2)
• Precision fixed dual-plate dies for crimp accuracy
• Built-in locator
• Crimps non-insulated terminal lugs, cable lugs and parallel and
serial splices or “F-Type”
• Works with Molex, Waldom & Leoco-type connectors
• Durable steel construction for long life
• Rubber-embedded ergonomic handles for low-effort operation
CAT. NO. DESCRIPTION
PA1631 Open Barrel Contact Pin Crimper
www.greenlee.com
Professional crimping tool for open-barrel D-sub contacts with a wire
range of 28-20 AWG (.08-0.50 mm2)
• Crimps standard D-sub contacts
• Precision fixed dual-plate dies for crimp accuracy
• Built-in contact locator
• Durable steel construction for long life
• Ergonomic handles for low-effort operation
CAT. NO. DESCRIPTION
PA1646 Open Barrel D-Sub Contact Pin Crimper
Crimping tool for 4- or 8-indent crimping of closed-barrel D-sub contacts.
• Dual-durometer grips provide comfort and control.
• 4-Indent crimper for AWG 26-20 (0.14-0.50 mm2) D-sub contacts (P/N 1460)
• 4-Indent crimper for AWG 20-12 (0.50-4.0 mm2) D-sub contacts (P/N 1461)
• 8-Indent crimper for AWG 26-20 (0.14-0.50 mm2) D-sub contacts (P/N 1462)
• Adjustable pin height locator (P/Ns 1460 and 1462 only)
CAT. NO. DESCRIPTION
PA1460
PA1461
PA1462
D-sub 4-Indent crimper (26-20 AWG)
D-sub 4-Indent crimper (20-12 AWG)
D-sub 8-Indent crimper (26-20 AWG)
Professional crimping tool for non-insulated terminal lugs with a wire range
of 20-10 AWG (0.5 – 6.0 mm2).
• Fixed steel die system
• Built-in terminal locator
• Crimps non-insulated terminal lugs, cable lugs and parallel and
serial splices
• Durable steel construction for long life
• Ergonomic handles for low-effort operation
CAT. NO. DESCRIPTION
PA1618 HTN 21L Non-Insulated Terminal Crimper
Wire & Cable Termination
USA CANADA INTERNATIONAL
Tel: 800.435.0786 Tel: 800.435.0786 Tel: +1.815.397.7070
Fax: 800.451.2632 Fax: 800.524.2853 Fax: +1.815.397.9247
225