Water Specification [DOC] - City of Barrie

More documents

Recommendations

Info

City of Barrie Water Distribution Specification Section “E” - By-Laws and Agreements E-1 February, 2005 1.0 LIABILITY INSURANCE 1.1 The Contractor shall provide, maintain and pay for insurance and all required assessments to protect himself and the City from claims under the Workers' Compensation Act and from any other claims for damages arising from personal injury, including death, and for claims for property damage that may arise from his operation under this contract. 1.2 The Developer/Owner shall save harmless, the City, its agents and employees from and against all claims, demands, losses, costs, damages, actions, suits and proceedings arising out of or attributable to any act or omission in connection with the development and servicing of this plan of subdivision, and without limiting the generality of the foregoing, including inspections of the services arising out of, or attributable to the development.
City of Barrie Water Distribution Specification Section “F” - Installation and Construction F-1 February, 2005 1.0 INSTALLATION AND CONSTRUCTION 1.1 Prior to the installation of the watermain and appurtenances, the Contractor shall notify the City’s Representative 48 hours in advance. 1.2 The Consultant/Contractor shall obtain all necessary permits and consents associated with the excavation and installation of water distribution systems on existing City of Barrie road allowances. The Developer/Owner shall have survey markers and/or property bars defining the boundary of each lot, easement and road allowance. 1.3 All construction shall conform to the City's Standard Specifications and Drawings. During construction all watermain installations shall be in accordance with ANSI/AWWA Standard C651-99 - Disinfecting Watermains. 2.0 MATERIALS 2.1 The Contractor shall supply all materials for the watermain and appurtenances necessary for the complete watermain assembly. 2.2 A complete list of materials, which will be used to install the water distribution system, shall be sent to the City Representative for approval before construction commences. 2.3 The Contractor shall inspect all materials before installation and reject any pieces showing breaks, cracks or other defects. Before the watermain is lowered into the ground it shall be brushed out to ensure that there is no dirt or foreign material in the watermain or appurtenances. 3.0 WATERMAIN AND APPURTENANCES 3.1 Sacrificial caps shall be used on all mechanical joint fittings on every bolt. The Contractor shall provide for sufficient bolt lengths to accommodate the caps. Refer to the Material Data Sheet (Cathodic Protection) located on page K-4. 3.2 Concrete thrust blocking shall be installed at all tees, vertical and horizontal bends, hydrants, ends of watermains and connections 100 mm and larger, as per OPSD 1103.010 and OPSD 1103.020. PVC ‘tee’ pressure fittings require additional thrust blocking on either side of the tee legs. In cases where concrete thrust blocking is inappropriate, restraining glands may be used at the discretion of the City’s Representative.
Page 1 and 2: City of Barrie Water Distribution S
Page 7 and 8: A-1 City of Barrie Water Distributi
Page 11 and 12: B-3 City of Barrie Water Distributi
Page 21: City of Barrie Water Distribution S
Page 47 and 48: I-2 City of Barrie February, 2005 W
Page 61: City of Barrie Water Distribution S

Water Specification [DOC] - City of Barrie

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?