Water Specification [DOC] - City of Barrie

More documents

Recommendations

Info

B-8 City of Barrie Water Distribution Specification Section “B” - Design Criteria February, 2005 14.0 PVC WATERMAIN 14.1 Pipe Deflection On a radius, lengths should be assembled in a straight line and then curved in the trench. All curvatures result from the bending of the pipe lengths. Deflection of the joint is very slight, up to one degree. The Contractor shall follow, at all times, manufacturer specifications for pipe deflection. Offset per 20 ft (6.1 metres) Length Pipe Size 4" (100 mm) - 24" (610 mm) 6" (150 mm) - 17" (430 mm) 8" (200 mm) - 12" (305 mm) 10" (250 mm) - 11" (280 mm) 12" (305 mm) - 9" (230 mm) 16” (400 mm) - 6” (150 mm)
City of Barrie Water Distribution Specification C-1 February, 2005 Section “C” - Submission of Plans and Approvals 1.0 PLANS 1.1 The Developer/Owner or his Consultant shall submit a proposed design for any extension of the water distribution system to the City's Engineering Department for approval. 1.2 The preliminary submission shall consist of paper copies: Two (2) copies of the "Overall General Plan" (scales 1:500 to 1:2000) Two (2) copies of the "Plan and Profile Drawings" (scale 1:500 or 1:250 horizontal and 1:50 vertical) One (1) copy of the "Proposed Registered Plan" This preliminary plan shall show the size and type of watermain, the location of mains, valves, hydrants, services, bends, tees, and crosses in relation to all other utilities. The submission also shall include the location of proposed and existing elevation. These plans shall be on “D” standard size sheets of paper. This preliminary submission shall be reviewed by the City's Engineering Department and one (1) copy shall be given back to the Developer/Owner showing all the changes that are required. 1.3 The final submission shall consist of one (1) set of paper and one (1) set of mylar copies of the following: "Overall General Plan" (scale 1:500 to 1:2000) "Plan and Profile Drawings" (scale 1:500 or 1:250 horizontal and 1:50 vertical) "Ministry of the Environment Application for Approval of Water Works" and supporting documents. One (1) set of "mylars of Overall General Plan" and "mylars of Plan and Profile Drawings" on D standard sheets, complete with the City of Barrie signature of approval for roads, watermain, sanitary and storm sewer locations. 1.4 Digital data must be AutoCAD compatible with the City of Barrie and must be tied to the horizontal Cosine Network NAD83. 2.0 APPROVALS 2.1 The City of Barrie will not release consent for the issue of building permits prior to the watermains and services being installed, approved and connected to the existing municipal water distribution system.
Page 1 and 2: City of Barrie Water Distribution S
Page 7 and 8: A-1 City of Barrie Water Distributi
Page 11 and 12: B-3 City of Barrie Water Distributi
Page 13 and 14: B-5 City of Barrie Water Distributi
Page 15: B-7 City of Barrie Water Distributi
Page 47 and 48: I-2 City of Barrie February, 2005 W
Page 61: City of Barrie Water Distribution S

Water Specification [DOC] - City of Barrie

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?