DuraPlate Repair Manual - Wabash National Corporation

Logistic DuraPlate Panel Change
2-18
3. The adjacent panel scuff liner holes should still be available. Secure the
liner back into place and realign the holes so rivets can be installed.
4. Back drill the holes in the new panel from the inside outward. Change
from 3 /16" to 1 /4" rivets, installing 12 rivets per panel width.
5. Then, install the final 12 1 /4" x 13 /16" rivets (BRV00160 modified Brazier)
along the upper lip of the base rail.
Figure 2-12, Riveting the Scuff Liner to the Side Panel
®