McCormick-Deering Farmall Tractors and ... - Antique Farming

Farmall Specifications Supply
Key to Farmall Performance
U
ARMALL tractors come to you ready to supply
r abundant power for every farm power job. The
specifications below are a key to the ability of
these tractors to serve long and efficiently.
All have oil filter, oil air cleaners and Harvester's
own magneto with automatic-impulse coupling. The
F-20 and F-30 use tractor distillate, kerosene or
Maximum Drawbar Horsepower
Maximum Belt Horsepower
Rated Drawbar Horsepower (75% of max.)
Rated Belt Horsepower (85% of max.)
Forward Speeds, miles per hour
Reverse Speed, miles per hour
Speed of Engine on load, rev. per min
Governor
Bore of Cylinders and Stroke
Belt Pulley, diameter
Belt Pulley, face
Pulley Speed, rev, per min
Belt Speed, feet per min.
Power Take-Off Shaft, rev, per min.
Front Wheels
Tread, front wheels
Drive Wheels
Tread, drive wheels (C. to C.)
Wheelbase
Total Length
Total Width
Height, over all, less lugs
Height, top of air strainer
Turning Radius
Cooling System
Capacity, fuel tank
Capacity, gasoline tank
Capacity, cooling system
Lubrication
Clutch
Steering
Drawbar, vertical adjustment
Drawbar, horizontal adjustment
Shipping Weight, approximately
* 42 x 12 Optional. t Narrow Tread, 62% and 73%
For Complete
Information
on the
FARMALL 14
and Machines,
ask or write for
F-14 Catalog
For lack of space in this catalog,
the Farmall 14 and its quick-attachable
machines are covered in a
separate catalog which will be gladly
supplied to anyone interested.
Simply ask a McCormick-Deering
dealer or mark and return the card
included with this book.
gasoline and have adjustable radiator shutter and
heat indicator. The latter equipment is supplied
with the F-14 when ordered with kerosene equipment.
Equipment includes belt pulley.
Special transmissions available for rubber-tired
Farmalls give traveling speed of upwards of nine
miles per hour in high gear.
Farmall 14 Farmall 20
Farmall 30
15.36
18.21
11.52
15.48
24, 3, and 3%
24
1650
Controlled from seat for
1150 to 1650 R.P.M.
3 by 4 in.
21.30
28.00
15.98
23.80
24, 2%, 34, and 3%
1200
Controlled from seat for
950 to 1200 R.P.M.
3% by 5 in.
27.03
35.63
20.27
30.29
2, 2%, 3%, and 4
2%
1200
Controlled from seat for
950 to 1200 R.P.M.
44 by 5 in.
12% in.
64 in.
797
2580
550
22% by 4 in.
6% in. (C. to C.)
54 by 6 in.
44% to 79 in.
77 in.
124 in.
744 in. (ends of axles)
470% in.
84 in.
7 ft.
Thermo-Siphon
13 gal.
3 gal.
Force Feed
9 in., single plate
Worm, gear-enclosed
7 1A in.
16 in.
2800 lb.
154 in.
6% in.
654
2610
505
25 by 4 in.
8% in. (C. to C.)
40 by 6 in. *
74% and 83 in. t
85 in.
140 in.
86% and 95% in.
78% in.
70 in.
8 ft.
Thermo-Siphon
13 gal.
% gal.
74 gal.
Pump and Splash
11 in., single plate
Worm, gear-enclosed
6% in.
** 46 in.
3950 lb.
14% in.
7% in.
712
2725
557
25 by 4 in.
8% and 11% in. (C. to C.)
42 by 12 in.
774 and 85% in.
94 in.
147 in.
894 and 97% in.
81 in.
70% in.
8 24 ft.
Pump—Thermostatic Control
21 gal.
1 gal.
10 gal.
Pump and Splash
12 in., single plate
Worm, gear-enclosed
6% in
** 46 in.
5300 lb.
$ Tractor on 40-in. Wheels.
A Over Steering Wheel.
*" Narrow tread, 30 in.
Must. 5 The Farmall 14 The belt pulley is supplied at a slight additional cost.
-1•11111.1r Vie/Mi 1111.11111111101111W
Farmall Farming Is Economy Farmin age 5