S1800 Marine Model Ice Machines – Service Manual - Manitowoc Ice
S1800 Marine Model Ice Machines – Service Manual - Manitowoc Ice
S1800 Marine Model Ice Machines – Service Manual - Manitowoc Ice
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section 4 Maintenance<br />
3. Water Distribution Tube<br />
! Warning<br />
Removing the distribution tube while the water<br />
pump is running will allow water to spray from ice<br />
machine. Disconnect the electrical power to the ice<br />
machine and dispenser at the electric service switch<br />
box and turn off the water supply.<br />
NOTE: Distribution tube thumbscrews are retained by orings<br />
to prevent loss. Loosen thumbscrews but do not<br />
pull thumbscrews out of distribution tube.<br />
B<br />
A<br />
Water Distribution Tube Removal<br />
A. Remove outer half of distribution tube by<br />
loosening the four (4) thumbscrews (o-rings<br />
retain thumbscrews to distribution tube).<br />
B. Pull inner half of water distribution tube forward<br />
to release slip joint from water pump tubing<br />
connection.<br />
4. Water Trough<br />
A. Depress tabs on right and left side of the water<br />
trough.<br />
B. Allow front of water trough to drop as you pull<br />
forward to disengage the rear pins.<br />
DEPRESS TABS<br />
Part Number 80-1634-3 4-7
Change language