S1800 Marine Model Ice Machines – Service Manual - Manitowoc Ice
S1800 Marine Model Ice Machines – Service Manual - Manitowoc Ice
S1800 Marine Model Ice Machines – Service Manual - Manitowoc Ice
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation Instructions Section 2<br />
WATER SUPPLY AND DRAIN LINE SIZING/CONNECTIONS<br />
! Caution<br />
Plumbing must conform to state and local codes.<br />
Location Water Temperature Water Pressure <strong>Ice</strong> Machine Fitting<br />
<strong>Ice</strong> Making<br />
Water Inlet<br />
<strong>Ice</strong> Making<br />
Water Drain<br />
Condenser<br />
Water Inlet<br />
Condenser<br />
Water Drain<br />
35°F (1.6°C) Min.<br />
90°F (32.2°C) Max.<br />
20 psi (137.9 kPA) Min.<br />
80 psi (551.5 kPA) Max.<br />
--- ---<br />
40°F (4.4°C) Min.<br />
90°F (32.2°C) Max.<br />
20 psi (137.9 kPA) Min.<br />
150 psi (1034.2 kPA) Max.<br />
--- ---<br />
Bin Drain --- ---<br />
ELECTRICAL ENTRANCE<br />
18” (46 CM) VENT TUBE<br />
1/2” DRAIN CONNECTION<br />
PLASTIC FITTING ON OPPOSITE<br />
SIDE DO NOT APPLY HEAT<br />
1/2” (1.3 CM) MIN<br />
DRAIN ID<br />
AIR GAP<br />
OPEN, TRAPPED AND<br />
VENTED DRAIN<br />
Typical Water Supply Drain Installation<br />
3/8" Female Pipe<br />
Thread<br />
1/2" Female<br />
Pipe Thread<br />
1/2" Female<br />
Pipe Thread<br />
3/4" Female<br />
Pipe Thread<br />
3/8" Female Pipe Thread<br />
Tubing Size Up to <strong>Ice</strong><br />
Machine Fitting<br />
3/8" (.95 cm) minimum<br />
inside diameter<br />
1/2" (1.27 cm) minimum<br />
inside diameter<br />
1/2" (1.27 cm) minimum<br />
inside diameter<br />
3/4" (1.91 cm) minimum<br />
inside diameter<br />
3/8” FPT ICE MAKING WATER INLET FITTING,<br />
PLASTIC FITTING ON OPPOSITE SIDE DO NOT<br />
APPLY HEAT<br />
3/8” FPT CONDENSER WATER INLET<br />
(WATER COOLED UNITS ONLY<br />
1/2” FPT CONDENSER WATER DRAIN<br />
(WATER COOLED UNITS ONLY)<br />
1/2” CPVC SOCKET AUXILLARY BASE<br />
DRAIN<br />
DO NOT TRAP DRAIN LINE,<br />
LEAVE AIR GAP BETWEEN<br />
DRAIN TUBE AND DRAIN<br />
2-6 Part Number 80-1634-3<br />
SV3142
Change language