S1800 Marine Model Ice Machines – Service Manual - Manitowoc Ice

Installation Instructions Section 2
Self-Contained Electrical Wiring Connections
! Warning
These diagrams are not intended to show proper
wire routing, wire sizing, disconnects, etc., only the
correct wire connections.
All electrical work, including wire routing and
grounding, must conform to local, state and national
electrical codes.
Though wire nuts are shown in the drawings, the ice
machine field wiring connections may use either
wire nuts or screw terminals.
SELF CONTAINED ICE MACHINE
115/1/60 OR 208-230/1/60
SV1258
L 1
GROUND
ICE MACHINE
CONNECTIONS
For United Kingdom Only
N=115V
OR
L2=208-230V
L 1
GROUND
TO SEPARATE
FUSE/BREAKER
SELF CONTAINED ICE MACHINE
208-230/3/60
SELF CONTAINED ICE MACHINE
230/1/50
2-4 Part Number 80-1634-3
SV1190
SV1191
L 1
L 2
L 3
GROUND
L 1
N
GROUND
ICE MACHINE
CONNECTIONS
ICE MACHINE
CONNECTIONS
L 1
L 2
L 3
GROUND
TO SEPARATE
FUSE/BREAKER
L1
N
GROUND
TO SEPARATE
FUSE/BREAKER.
DISCONNECT ALL
POLES.
As the colors of the wires in the mains lead of the appliance may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows:
• The wire which is colored green and yellow must be connected to the terminal in the plug which is marked with
the letter E or by the earth ground symbol or colored green or green and yellow.
• The wire colored blue must be connected to the terminal which is marked with the letter N or colored black.
• The wire colored brown must be connected to the terminal which is marked with the letter L or colored red.