weiler e1250 remixing transfer vehicle a - Cashman Equipment

WEILER E650A WINDROW ELEVATOR
THE ROAD TO SUCCESS STARTS WITH THE RIGHT
WINDROW ELEVATOR.
THIS RUGGED, FEATURE-PACKED UNIT HELPS PAVE THE WAY
When there’s a long road to pave, and you need to get the job done quickly and without interruptions, turn to the
Weiler E650A windrow elevator. With a proven high-slat entry position, operator-accessible chain speed and direction
control, this rugged, feature-packed machine can help lead the way to high-production paving.
MATERIAL-FEED SYSTEM IMPROVES MAT QUALITY
The material-feed system consists of two auger segments and slat conveyors. The auger segments are positioned
on each side of the slat conveyors. The augers combine the material and move it to the slat conveyors for
distribution into the hopper.
HIGH-SLAT ENTRY TACKLES TALL
WINDROWS
This feature enables the machine to tackle tall
windrows laid by belly dump trucks on highproduction
or wide-width jobs. It also relieves the
load on the foot shaft to ensure longer life of
both the foot shaft and bearings.
RELIABLE, DURABLE ENGINE AND
HEAVY-DUTY COMPONENTS ENSURE
LOW-MAINTENANCE OPERATION
A Cat turbocharged engine with 114 hp delivers
high performance and clean, quiet power. Plus,
convenient positioning of service points ensures
easy accessibility.
WIDE THROAT AND ADJUSTABLE
HYDRAULIC DRIVE SYSTEM ENHANCE
PRODUCTION
A wide 118-inch throat, with large augers, delivers
high production abilities. The infinitely variable
hydraulic drive system allows the speed of the
conveyor system to be matched with material and
production requirements. Remixing also takes place
when material is conveyed to the hopper.
ADJUSTABLE SCRAPERS CREATE A CLEAN
WHEEL PATH
Three independent, adjustable scrapers allow you the
flexibility to clean the surface of the road for the
elevator and paver. Scrapers are located at the rear of
the material-feed housing and extend across the width
of the machine. Scrapers are attached with shear pins
that protect them from damage by obstructions in the
surface being paved.
THREE-POINT SUSPENSION SYSTEM
HELPS ENSURE SECURE BOND BETWEEN
MAT AND TACK COAT
The three-point suspension system consists of a
hydraulic cylinder for each of the front wheels, and
a pair of interconnected hydraulic cylinders for the
two rear wheels. Because the two rear wheels are
connected, they are always mirroring each other.
The cylinders adjust the height of the wheels, which
in turn, changes the height of the machine.
NEW INSTRUMENT PANEL, DUAL-SIDE
OPERATING CONTROLS ENHANCE
PRODUCTIVITY AND SAFETY
Instrument panel gauges, located on the left side of the
machine, include oil pressure, water tempurature, volt meter,
fuel, start switch, hour meter, and chain control lever. An
engine warning light alerts the operator to shut down the
engine and helps prevent major damage. With operational
controls on both sides of the machine, this feature helps
protect the operator by offering a choice to work on either
side of the machine in order to avoid traffic.