Consumeables Catalog - Lincoln Electric

More documents

Recommendations

Info

FLUX-CORED SELF-SHIELDED (FCAW-S) WIRE Innershield ® Mild Steel, All Position • AWS E71T-8-J Key Features Designed to handle poor fit-up on heavy wall tubes and gaps up to 9.5 mm (3/8 in) with 6.4 mm (1/4 in) offset Fast freezing slag with excellent wash-in Root bead capability without back-up bars Typical Applications General plate fabrication, including bridge fabrication, hull plate and stiffener welding on ships and barges Storage tanks Structural welding Offshore welding in TKY joints 90 ı THE LINCOLN ELECTRIC COMPANY -203MP NR® Conformances AWS A5.20/A5.20M: ASME SFA-A5.20: ABS: Lloyd’s Register: DNV Grade: GL: BV Grade: CWB/CSA W48-06: Welding Positions All E71T-8-JH16 E71T-8-JH16 3YSA 3YS H15 III YMS H10 3YH15S SA3YMH E491T-8 H16
DIAMETERS / PACKAGING Diameter 14 lb (6.4 kg) Coil in (mm) 56 lb (25.4 kg) Master Carton 0.068 5/64 (1.7) (2.0) ED021604 25 lb (11.3 kg) Steel Spool ED030640 MECHANICAL PROPERTIES (1) – As Required per AWS A5.20/A5.20M Yield Strength (2) Tensile Charpy V-Notch Strength Elongation Hardness J (ft•lbf) MPa (ksi) MPa (ksi) % Rockwell B @ -29°C (-20°F) @-40°C (-40°F) Requirements - AWS E71T-8-J 400 (58) min. 480-655 (70-95) 22 min. – Not Specified 27 (20) min. Typical Results (3) 415-440 (60-64) 510-545 (74-79) 29-33 82-87 75-203 (55-150) 68-224 (50-165) DEPOSIT COMPOSITION (1) – As Required per AWS A5.20/A5.20M %C %Mn %Si %S %P %Al Requirements - AWS E71T-8-J 0.30 max. 1.75 max. 0.60 max. 0.03 max. 0.03 max. 1.8 max. Typical Results (3) 0.04-0.07 1.35-1.47 0.22-0.32 ≤0.01 ≤0.01 0.8-1.0 TYPICAL OPERATING PROCEDURES Diameter, CTWD Wire Feed Speed Voltage Approx. Current Melt-Off Rate Deposition Rate Efficiency Polarity mm (in) m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%) 1.8 (70) 16-17 145 1.5 (3.3) 1.0 (2.3) 69 2.3 (90) 18-19 180 1.9 (4.2) 1.5 (3.2) 76 0.068 in (1.7 mm), 25 (1) 3.0 (120) 20-21 225 2.5 (5.6) 2.0 (4.3) 76 DC- 3.5 (140) 21-22 255 2.9 (6.4) 2.2 (4.8) 75 3.8 (150) 23-24 265 3.1 (6.8) 2.3 (5.1) 75 1.3 (50) 16-17 130 1.4 (3.1) 0.9 (1.9) 61 1.8 (70) 18-19 180 2.0 (4.3) 1.3 (2.9) 67 5/64 in (2.0 mm), 25 (1) 2.3 (90) 19-20 220 2.5 (5.6) 1.9 (4.2) 75 DC- 2.8 (110) 20-21 260 3.1 (6.8) 2.4 (5.3) 77 3.0 (120) 21-22 280 3.4 (7.4) 2.7 (5.9) 79 3.5 (140) 22-23 310 3.9 (8.7) 3.1 (6.8) 79 (1) Typical all weld metal. (2) Measured with 0.2% offset. (3) See test results disclaimer on pg. 16. FLUX-CORED SELF-SHIELDED (FCAW-S) WIRE Innershield ® NR ® -203MP (AWS E71T-8-J) WELDING CONSUMABLES CATALOG ı 91
Page 1 and 2:
C1.10 www.lincolnelectric.com Weldi
Page 3:
GAS-SHIELDED FLUX-CORED (FCAW-G) WI
Page 6 and 7:
Detailed Table of Contents Stick St
Page 8 and 9:
Detailed Table of Contents Submerge
Page 10 and 11:
Detailed Table of Contents Aluminum
Page 12 and 13:
Catalog User Guide 4 7 8 9 10 11 12
Page 14 and 15:
INTRODUCTION 12 ı THE LINCOLN ELEC
Page 16 and 17:
INTRODUCTION Q Lot Certifications C
Page 18 and 19:
INTRODUCTION Disclaimers 16 ı THE
Page 20 and 21:
STICK (SMAW) ELECTRODE Fleetweld ®
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
STICK (SMAW) ELECTRODE Jetweld ® H
Page 30 and 31:
STICK (SMAW) ELECTRODE Excalibur ®
Page 32 and 33:
STICK (SMAW) ELECTRODE Jet-LH ® Lo
Page 34 and 35:
Page 36 and 37:
STICK (SMAW) ELECTRODE Shield-Arc®
Page 38 and 39:
STICK (SMAW) ELECTRODE Shield-Arc®
Page 40 and 41:
Page 42 and 43: STICK (SMAW) ELECTRODE Excalibur ®
Page 48 and 49: STICK (SMAW) ELECTRODE Notes 46 ı
Page 50 and 51: MIG (GMAW) WIRE SuperGlide® Typica
Page 52 and 53: MIG (GMAW) WIRE SuperGlide® Typica
Page 54 and 55: MIG (GMAW) WIRE SuperArc® Typical
Page 64 and 65: MIG (GMAW) WIRE SuperArc® Capable
Page 66 and 67: TIG (GTAW) CUT LENGTHS Lincoln® Ty
Page 68 and 69: MIG (GMAW) & TIG (GTAW) CONSUMABLES
Page 70 and 71: METAL-CORED WIRE Metalshield ® Mil
Page 72 and 73: Structural Welding Code Seismic Sup
Page 74 and 75: METAL-CORED WIRE Metalshield ® Mil
Page 76 and 77: METAL-CORED WIRE Metalshield ® Low
Page 82 and 83: METAL-CORED CONSUMABLES Notes 80 ı
Page 84 and 85: FLUX-CORED SELF-SHIELDED (FCAW-S) W
Page 114 and 115: FLUX-CORED GAS-SHIELDED (FCAW-G) WI
Page 142 and 143:
Structural Welding Code Seismic Sup
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
FLUX-CORED GAS-SHIELDED (FCAW-G) WI
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
SUBMERGED ARC (SAW) FLUX Lincolnwel
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Lincolnweld ® Features the chemica
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
SUBMERGED ARC (SAW) ELECTRODE Linco
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
SUBMERGED ARC (SAW) CONSUMABLES Not
Page 196 and 197:
STICK (SMAW) ELECTRODE Excalibur®
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
MIG (GMAW) WIRE Blue Max® Stainles
Page 208 and 209:
Page 210 and 211:
MIG (GMAW) WIRE Blue Max ® Stainle
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
TIG (GTAW) CUT LENGTHS Lincoln® St
Page 234 and 235:
TIG (GTAW) CUT LENGTHS Lincoln® St
Page 236 and 237:
METAL-CORED (GMAW-C) WIRE Outershie
Page 238 and 239:
HARDFACING STICK (SMAW) ELECTRODE W
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
HARDFACING METAL-CORED GAS-SHIELDED
Page 250 and 251:
HARDFACING METAL-CORED (GMAW-C) WIR
Page 252 and 253:
HARDFACING FLUX-CORED SELF-SHIELDED
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
HARDFACING METAL-CORED SUBMERGED AR
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
HARDFACING SUBMERGED ARC (SAW) FLUX
Page 280 and 281:
HARDFACING SUBMERGED ARC (SAW) FLUX
Page 282 and 283:
MIG (GMAW) WIRE SuperGlaze Aluminum
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
SuperGlaze ® MIG (GMAW) WIRE Alumi
Page 290 and 291:
TIG (GTAW) CUT LENGTHS SuperGlaze A
Page 292 and 293:
ALUMINUM & CAST IRON CONSUMABLES No
Page 294 and 295:
PIPELINER ® STICK (SMAW) ELECTRODE
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Pipeliner® Welding Positions All P
Page 306 and 307:
PIPELINER ® FLUX-CORED SELF-SHIELD
Page 308 and 309:
PIPELINER ® FLUX-CORED GAS-SHIELDE
Page 310 and 311:
PIPELINER ® FLUX-CORED GAS-SHIELDE
Page 312 and 313:
PIPELINER ® CONSUMABLES Electrode
Page 314 and 315:
PIPELINER ® CONSUMABLES Electrode
Page 316 and 317:
PIPELINER ® CONSUMABLES EN and ISO
Page 318 and 319:
Agency Approvals NOTE: Approvals ar
Page 320 and 321:
PIPELINER ® CONSUMABLES Notes 318
Page 322 and 323:
Power Generation & Nuclear Lincoln
Page 324 and 325:
BATCH | STICK (SMAW) ELECTRODE Exca
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
BATCH | MIG (GMAW) WIRE SuperArc®
Page 332 and 333:
BATCH | MIG (GMAW) WIRE SuperArc®
Page 334 and 335:
BATCH | MIG (GMAW) WIRE Blue Max®
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
TIG (GTAW) CUT LENGTHS Lincoln® Lo
Page 344 and 345:
BATCH | TIG (GTAW) CUT LENGTHS Linc
Page 346 and 347:
BATCH | ORBITAL TIG (GTAW) WIRE Sup
Page 348 and 349:
BATCH | FLUX-CORED GAS-SHIELDED (FC
Page 350 and 351:
Page 352 and 353:
SUBMERGED ARC (SAW) FLUX AND WIRE C
Page 354 and 355:
SUBMERGED ARC (SAW) WIRE AND FLUX L
Page 356 and 357:
SUBMERGED ARC (SAW) WIRE AND FLUX L
Page 358 and 359:
PACKAGING Tubes, Cans & Cartons 5 l
Page 360 and 361:
PACKAGING Reels & Stem REELS Wire T
Page 362 and 363:
PACKAGING Spools A SPOOLS Wire Type
Page 364 and 365:
PACKAGING Coils, Boxes & Bags COILS
Page 366 and 367:
PACKAGING Drums & Pails DRUMS Wire
Page 368 and 369:
PACKAGING Storage & Handling Stick
Page 370 and 371:
PACKAGING Storage & Handling Metal-
Page 372 and 373:
PACKAGING Storage & Handling Submer
Page 374 and 375:
APPENDIX AWS Classification System
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
APPENDIX Stick Electrode Types of C
Page 384 and 385:
APPENDIX Submerged Arc Fluxes Flux
Page 386 and 387:
APPENDIX Submerged Arc Flux/Wire Se
Page 388 and 389:
APPENDIX Aluminum Typical Operating
Page 390 and 391:
APPENDIX Aluminum Typical Joint Des
Page 392 and 393:
APPENDIX Innershield® Wire Selecti
Page 394 and 395:
APPENDIX Agency Approvals NOTE: App
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
APPENDIX Safety Guidelines Diesel e
Page 408 and 409:
APPENDIX Safety Guidelines ARC RAYS
Page 410 and 411:
APPENDIX Safety Guidelines CYLINDER
Page 412 and 413:
APPENDIX Safety Guidelines The gase
Page 414 and 415:
APPENDIX Notes
Page 416:
THE LINCOLN ELECTRIC COMPANY 22801
show all

Consumeables Catalog - Lincoln Electric

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?