Consumeables Catalog - Lincoln Electric
Consumeables Catalog - Lincoln Electric Consumeables Catalog - Lincoln Electric
BATCH | TIG (GTAW) CUT LENGTHS Lincoln® Stainless Steel • AWS ER309/ER309L Key Features Q2 Lot ® - Certificate showing actual wire composition and calculated ferrite number (FN) available online Available as Batch Managed Inventory “N” Designator - cobalt restriction of 0.05% max Use for welding dissimilar alloys in wrought or cast form Meets the low cobalt levels typically required in the nuclear industry Occasionally used for welding “18-8” base metals when severe corrosion conditions exist or dissimilar metals 0.03% carbon content increases resistance to intergranular corrosion Prior to using this material for ASME Boiler and Pressure Vessel Code Section III applications, please contact the Lincoln Electric Specials Department to receive a Certified Material Test Report (CMTR) which meets all requirements of NCA-3860 Product is marked every 4 in. (101.6 mm) with AWS classification and LOT number for easy identification 342 ı THE LINCOLN ELECTRIC COMPANY ER309/309L N Typical Applications Nuclear power plant components, maintenance and construction Sheet metal on the corresponding stainless steel base metals High pressure piping and tubing Pressure Vessels ASME IX Qualification ASME IX Qualification: QW432 F-No 6, QW442 A-No 8 Conformances AWS A5.9/A5.9M: 2006: ASME SFA-A5.9: Welding Positions All DIAMETERS / PACKAGING Diameter 10 lb (4.5 kg) Plastic Tube in (mm) 30 lb (13.6 kg) Master 3/32 (2.4) 1/8 (3.2) ED033856 ED033857 ER309, ER309L ER309, ER309L WIRE COMPOSITION – As Required per AWS A5.9/A5.9M: 2006 %C %Cr %Ni %Mo %Mn Requirements - AWS ER309L 0.03 (2) max. 23.0 - 25.0 12.0 - 14.0 0.75 max. 1.0 - 2.5 Test Results (1) 0.02 23.7 13.9 0.04 1.8 %Si %P %S %Cu Total Others Requirements - AWS ER309L 0.30 - 0.65 0.03 max. 0.03 max. 0.75 max. 0.50 max. Test Results (1) 0.51 0.02 0.01 0.05 0.06 IMPORTANT: SPECIAL VENTILATION AND/OR EXHAUST REQUIRED Fumes from the normal use of some welding products can contain significant quantities of components - such as chromium and manganese - which can lower the 5.0 mg/m3 maximum exposure guideline for general welding fume. BEFORE USE, READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. (1) See test results disclaimer on pg. 12. (2) Requirements for ER309 is 0.12% max. carbon.
Typical Applications Nuclear power plant construction and maintenance Alloy 2205: UNS S31803, UNS S31500 Alloy 2304: UNS S32304, UNS S31200 Air pollution control systems for coal fired power plants Power and process industry components and piping Pressure Vessels ASME IX Qualification ASME IX Qualification: QW432 F-No 6, QW442 A-No 8 Conformances AWS A5.9/A5.9M: 2006: ASME SFA-A5.9: Welding Positions All Blue Max® Key Features DIAMETERS / PACKAGING Diameter 10 lb (4.5 kg) Plastic Tube in (mm) 30 lb (13.6 kg) Master 3/32 (2.4) 1/8 (3.2) ER2209 ER2209 (1) Typical all weld metal. (2) Measured with 0.2% offset. (3) See test results disclaimer on pg. 12. ED033957 ED033958 TIG (GTAW) CUT LENGTHS | BATCH LNT 4462 N AWS ER2209 • Stainless Steel Q2 Lot ® - Certificate showing actual wire composition and calculated ferrite number (FN) available online Available as Batch Managed Inventory “N” Designator - cobalt restriction of 0.05% max Premium performance and quality Designed for joining duplex stainless steels, such as type 2205, for applications with service temperatures up to 250°C (480°F) and down to -40°C (-40°F). Provides high resistance to general corrosion, pitting and stress corrosion Composition is controlled to produce consistent mechanical properties MECHANICAL PROPERTIES (1) – As Required per AWS A5.9/A5.9M: 2006 Yield Strength (2) Tensile Strength Elongation Charpy V-Notch J (ft•lbf) MPa (ksi) MPa (ksi) % @ -20°C (-4°F) @ -60°C (-75°F) Requirements - AWS ER2209 Not Specified Test Results (2) - As-Welded 600 (87) 800 (116) 28 60 (44) 45 (33) WIRE COMPOSITION (1) – As Required per AWS A5.9/A5.9M: 2006 %C %Cr %Ni %Mo %Mn Requirements - AWS ER2209 0.030 max. 21.5-23.5 7.5-9.5 2.5-3.5 0.5-2.0 Test Results (3) 0.018 22.7 8.5 3.0 1.5 %Si %P %S %Cu %N Requirements - AWS ER2209 0.90 max. 0.03 max. 0.03 max. 0.75 max. 0.08-0.20 Test Results (3) 0.50 0.03 0.03 0.30 0.15 IMPORTANT: SPECIAL VENTILATION AND/OR EXHAUST REQUIRED Fumes from the normal use of some welding products can contain significant quantities of components - such as chromium and manganese - which can lower the 5.0 mg/m3 maximum exposure guideline for general welding fume. BEFORE USE, READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. WELDING CONSUMABLES CATALOG ı 343
- Page 294 and 295: PIPELINER ® STICK (SMAW) ELECTRODE
- Page 296 and 297: PIPELINER ® STICK (SMAW) ELECTRODE
- Page 298 and 299: PIPELINER ® STICK (SMAW) ELECTRODE
- Page 300 and 301: PIPELINER ® STICK (SMAW) ELECTRODE
- Page 302 and 303: PIPELINER ® STICK (SMAW) ELECTRODE
- Page 304 and 305: Pipeliner® Welding Positions All P
- Page 306 and 307: PIPELINER ® FLUX-CORED SELF-SHIELD
- Page 308 and 309: PIPELINER ® FLUX-CORED GAS-SHIELDE
- Page 310 and 311: PIPELINER ® FLUX-CORED GAS-SHIELDE
- Page 312 and 313: PIPELINER ® CONSUMABLES Electrode
- Page 314 and 315: PIPELINER ® CONSUMABLES Electrode
- Page 316 and 317: PIPELINER ® CONSUMABLES EN and ISO
- Page 318 and 319: Agency Approvals NOTE: Approvals ar
- Page 320 and 321: PIPELINER ® CONSUMABLES Notes 318
- Page 322 and 323: Power Generation & Nuclear Lincoln
- Page 324 and 325: BATCH | STICK (SMAW) ELECTRODE Exca
- Page 326 and 327: STICK (SMAW) ELECTRODE Excalibur®
- Page 328 and 329: STICK (SMAW) ELECTRODE Excalibur®
- Page 330 and 331: BATCH | MIG (GMAW) WIRE SuperArc®
- Page 332 and 333: BATCH | MIG (GMAW) WIRE SuperArc®
- Page 334 and 335: BATCH | MIG (GMAW) WIRE Blue Max®
- Page 336 and 337: BATCH | MIG (GMAW) WIRE Blue Max®
- Page 338 and 339: BATCH | MIG (GMAW) WIRE Blue Max®
- Page 340 and 341: BATCH | MIG (GMAW) WIRE Blue Max®
- Page 342 and 343: TIG (GTAW) CUT LENGTHS Lincoln® Lo
- Page 346 and 347: BATCH | ORBITAL TIG (GTAW) WIRE Sup
- Page 348 and 349: BATCH | FLUX-CORED GAS-SHIELDED (FC
- Page 350 and 351: FLUX-CORED GAS-SHIELDED (FCAW-G) WI
- Page 352 and 353: SUBMERGED ARC (SAW) FLUX AND WIRE C
- Page 354 and 355: SUBMERGED ARC (SAW) WIRE AND FLUX L
- Page 356 and 357: SUBMERGED ARC (SAW) WIRE AND FLUX L
- Page 358 and 359: PACKAGING Tubes, Cans & Cartons 5 l
- Page 360 and 361: PACKAGING Reels & Stem REELS Wire T
- Page 362 and 363: PACKAGING Spools A SPOOLS Wire Type
- Page 364 and 365: PACKAGING Coils, Boxes & Bags COILS
- Page 366 and 367: PACKAGING Drums & Pails DRUMS Wire
- Page 368 and 369: PACKAGING Storage & Handling Stick
- Page 370 and 371: PACKAGING Storage & Handling Metal-
- Page 372 and 373: PACKAGING Storage & Handling Submer
- Page 374 and 375: APPENDIX AWS Classification System
- Page 376 and 377: APPENDIX AWS Classification System
- Page 378 and 379: APPENDIX AWS Classification System
- Page 380 and 381: APPENDIX AWS Classification System
- Page 382 and 383: APPENDIX Stick Electrode Types of C
- Page 384 and 385: APPENDIX Submerged Arc Fluxes Flux
- Page 386 and 387: APPENDIX Submerged Arc Flux/Wire Se
- Page 388 and 389: APPENDIX Aluminum Typical Operating
- Page 390 and 391: APPENDIX Aluminum Typical Joint Des
- Page 392 and 393: APPENDIX Innershield® Wire Selecti
Typical Applications<br />
Nuclear power plant construction and maintenance<br />
Alloy 2205: UNS S31803, UNS S31500<br />
Alloy 2304: UNS S32304, UNS S31200<br />
Air pollution control systems for coal fired power plants<br />
Power and process industry components and piping<br />
Pressure Vessels<br />
ASME IX Qualification<br />
ASME IX Qualification: QW432 F-No 6,<br />
QW442 A-No 8<br />
Conformances<br />
AWS A5.9/A5.9M: 2006:<br />
ASME SFA-A5.9:<br />
Welding Positions<br />
All<br />
Blue Max®<br />
Key Features<br />
DIAMETERS / PACKAGING<br />
Diameter 10 lb (4.5 kg) Plastic Tube<br />
in (mm)<br />
30 lb (13.6 kg) Master<br />
3/32 (2.4)<br />
1/8 (3.2)<br />
ER2209<br />
ER2209<br />
(1) Typical all weld metal. (2) Measured with 0.2% offset. (3) See test results disclaimer on pg. 12.<br />
ED033957<br />
ED033958<br />
TIG (GTAW) CUT LENGTHS | BATCH<br />
LNT 4462 N<br />
AWS ER2209 • Stainless Steel<br />
Q2 Lot ® - Certificate showing actual wire<br />
composition and calculated ferrite number<br />
(FN) available online<br />
Available as Batch Managed Inventory<br />
“N” Designator - cobalt restriction of<br />
0.05% max<br />
Premium performance and quality<br />
Designed for joining duplex stainless steels,<br />
such as type 2205, for applications with<br />
service temperatures up to 250°C (480°F) and<br />
down to -40°C (-40°F).<br />
Provides high resistance to general corrosion,<br />
pitting and stress corrosion<br />
Composition is controlled to produce consistent<br />
mechanical properties<br />
MECHANICAL PROPERTIES (1) – As Required per AWS A5.9/A5.9M: 2006<br />
Yield Strength (2) Tensile Strength Elongation<br />
Charpy V-Notch<br />
J (ft•lbf)<br />
MPa (ksi) MPa (ksi) % @ -20°C (-4°F) @ -60°C (-75°F)<br />
Requirements - AWS ER2209 Not Specified<br />
Test Results (2) - As-Welded 600 (87) 800 (116) 28 60 (44) 45 (33)<br />
WIRE COMPOSITION (1) – As Required per AWS A5.9/A5.9M: 2006<br />
%C %Cr %Ni %Mo %Mn<br />
Requirements - AWS ER2209 0.030 max. 21.5-23.5 7.5-9.5 2.5-3.5 0.5-2.0<br />
Test Results (3) 0.018 22.7 8.5 3.0 1.5<br />
%Si %P %S %Cu %N<br />
Requirements - AWS ER2209 0.90 max. 0.03 max. 0.03 max. 0.75 max. 0.08-0.20<br />
Test Results (3) 0.50 0.03 0.03 0.30 0.15<br />
IMPORTANT: SPECIAL VENTILATION AND/OR EXHAUST REQUIRED<br />
Fumes from the normal use of some welding products can contain significant quantities of components - such as chromium and manganese - which can lower the 5.0 mg/m3 maximum exposure guideline for general welding fume.<br />
BEFORE USE, READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.<br />
WELDING CONSUMABLES CATALOG ı 343