Consumeables Catalog - Lincoln Electric

HARDFACING METAL-CORED SUBMERGED ARC (SAW) ELECTRODE
Lincore®
410
Roll Rebuilding - Metal-to-Metal
Key Features
Metal-cored wire with a 410 martensitic
stainless steel deposit
Low carbon content and high corrosion
resistance
Soft and easily machined
DIAMETERS / PACKAGING
Diameter 50 lb (22.7 kg)
in (mm)
Coil
3/32 (2.4)
ED018583
5/32 (4.0)
MECHANICAL PROPERTIES (1)
DEPOSIT COMPOSITION (1)
268 ı THE LINCOLN ELECTRIC COMPANY
Typical Applications
Caster rolls
Rockwell Hardness (R C )
27 - 32
Recommended Flux
Primary Flux
801
With Recommended Neutral Flux
600 lb (272 kg)
Speed-Feed ® Drum
ED018588
Secondary Flux (1)
802
%C %Mn %Si %Cr
0.08 0.80 0.40 12.50
TYPICAL OPERATING PROCEDURES
Diameter, Polarity
Wire Feed Speed Voltage Approx. Current Deposition Rate
ESO - in (mm)
m/min (in/min) (Volts)
(Amps)
kg/hr (lb/hr)
3/32 in (2.4 mm), DC+
3/4 (20)
1.7 (65)
3.0 (120)
4.4 (175)
24
28
31
250
375
450
2.9 (6.5)
5.4 (12.0)
7.9 (17.5)
5/32 in (4.0 mm), DC+
1-1/2 (38)
1.4 (55)
2.2 (85)
2.9 (115)
27
30
32
475
650
800
5.9 (13.1)
9.2 (20.2)
12.4 (27.3)
IMPORTANT: SPECIAL VENTILATION AND/OR EXHAUST REQUIRED
Fumes from the normal use of some welding products can contain significant quantities of components - such as chromium and manganese - which can lower the 5.0 mg/m3 maximum exposure guideline for general welding fume.
BEFORE USE, READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.
(1) Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.
(1) 802 and 860 standard flux are not sized for semiautomatic applications; however, they can be ordered in special sizing by
contacting your Lincoln Electric representative.