Consumeables Catalog - Lincoln Electric

Typical Applications
HARDFACING METAL-CORED SUBMERGED ARC (SAW) ELECTRODE
IMPORTANT: SPECIAL VENTILATION AND/OR EXHAUST REQUIRED
Lincore®
Caster rolls Metal-cored wire for general build-up
Recommended Flux
Primary Flux
801
Secondary Flux (1)
802, 880
(1) 802 and 860 standard flux are not sized for semiautomatic applications; however, they can be ordered in special sizing by
contacting your Lincoln Electric representative.
DIAMETERS / PACKAGING
Diameter 50 lb (22.7 kg)
in (mm)
Coil
3/32 (2.4)
ED015265
1/8 (3.2)
ED015266
MECHANICAL PROPERTIES (1)
4130
Roll Rebuilding - Build Up, Flame Hardenable
Rockwell Hardness (R C )
17 - 21
Key Features
Can be flame hardened to 38 Rockwell C (R C )
Used on mining components such as cable
drums, sheaves, gears and shafts
600 lb (272 kg)
Speed-Feed ® Drum
ED015532
ED015405
DEPOSIT COMPOSITION (1)
%C %Mn
With Recommended Neutral Flux
%Si %Cr %Mo
0.12 1.10 0.30 0.80 0.20
TYPICAL OPERATING PROCEDURES
Diameter, Polarity
Wire Feed Speed Voltage Approx. Current Deposition Rate
ESO - in (mm)
m/min (in/min) (Volts)
(Amps)
kg/hr (lb/hr)
3/32 in (2.4 mm), DC+
3/4 (20)
1.7 (65)
3.0 (120)
4.4 (175)
24
28
31
300
410
520
2.9 (6.5)
5.4 (12.0)
7.9 (17.5)
1/8 in (3.2 mm), DC+
3/4 (20)
1.5 (60)
2.5 (100)
3.6 (140)
26
28
30
350
465
590
3.9 (8.5)
7.2 (16.0)
10.6 (23.5)
Fumes from the normal use of some welding products can contain significant quantities of components - such as chromium and manganese - which can lower the 5.0 mg/m 3 maximum exposure guideline for general welding fume.
BEFORE USE, READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.
(1) Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.
WELDING CONSUMABLES CATALOG ı 267